Fingerprint enrollment
Zenoti Biometrics is a standalone Windows desktop application that lets authorized managers enroll, re-enroll, revoke, and permanently remove employee fingerprints for biometric attendance tracking. This article explains how to perform each of these operations using the application.
Audience: Managers and administrators who manage employee biometric attendance at a center.
On this page
Before you begin
- Biometric attendance must be enabled at both the organization level and the center level. To verify or enable this, go to Configuration > Employee > Employee attendance.
- The center's biometric scan type must be set to Zenoti Biometrics (not Browser-based authentication from appointment book). This setting is at Configuration > Employee > Employee attendance > Specify the type of authentication you want to use.
- A supported fingerprint scanner must be physically connected to the Windows device running Zenoti Biometrics before you begin enrollment.
- You must be signed in to Zenoti Biometrics with a valid Zenoti employee account that has access to the center where you are enrolling employees.
- Fingerprint data is stored securely on the device on which enrollment is performed. Enrollments made in Zenoti Biometrics are independent of browser-based fingerprint enrollment and do not transfer between the two systems.
Permission: You need the appropriate manager or administrator role at the center to enroll, revoke, or unenroll employee fingerprints. Contact your organization administrator if you do not have access.
Steps
Enroll an employee's fingerprint
Use this procedure to enroll a new fingerprint for an employee who does not yet have biometric access at this center.
Open Zenoti Biometrics on the Windows device connected to the fingerprint scanner.
Sign in with your Zenoti credentials and select your center.
On the main dashboard, select Enroll New Employee.
On the Enroll New Employee screen, locate the employee using the Search Employee field. You can search by name or employee code.
Note: The screen displays the prompt: "Select an employee from the list below to enroll their biometric fingerprint."
Select the employee from the list. The employee's Employee Code and Employee Name are shown for confirmation.
Review the on-screen consent statement: "By clicking below, you acknowledge and consent to the collection and secure storage of your fingerprint data for attendance verification." Ensure the employee has acknowledged this before proceeding.
Select Start Fingerprint Scan. The scanner status changes to Connecting to scanner... and then SCANNING... once the scanner is ready.
Instruct the employee to place their finger on the scanner surface as prompted. The application captures multiple scans to build the enrollment template.
Tip: Vary finger placement and angle between scans to improve matching accuracy. Ensure the scanner surface is clean and dust-free before scanning.
After all required scans are captured, the application checks the new enrollment against all existing enrollments for duplicate fingerprints β including fingerprints that have been revoked.
- If a duplicate is detected, the enrollment is blocked and you are notified. The employee cannot be enrolled with that fingerprint.
- If no duplicate is found, the enrollment is saved securely on the device.
When enrollment completes successfully, the screen displays Employee Enrolled Successfully!
The employee can now use fingerprint scanning for attendance check-in and check-out at this center.
Worked example: You are enrolling a new provider, Alex Chen (employee code EMP-0042). After selecting Alex from the list, you tap Start Fingerprint Scan and ask Alex to place their right index finger on the scanner three times, varying the angle slightly each time. The application confirms no duplicate is found and displays "Employee Enrolled Successfully!" Alex's enrollment status in the employee list changes from Not Enrolled to Enrolled.
Re-enroll an employee's fingerprint
Use this procedure to replace an existing fingerprint enrollment β for example, if the original enrollment produces poor scan quality or the employee injures their enrolled finger.
- On the main dashboard, select Employee Management.
- Locate the employee in the list. Their Enrollment Status shows Enrolled.
- Select Enroll New Employee and search for the same employee.
- Follow steps 6β10 in Enroll an employee's fingerprint.
When the new enrollment completes, it replaces the prior enrollment. The employee's previous fingerprint template is removed and the new template is stored in its place.
Important: Re-enrollment permanently replaces the prior fingerprint template. The old template cannot be recovered after re-enrollment completes.
Revoke an employee's fingerprint access
Use this procedure to temporarily suspend an employee's biometric access without deleting their enrollment β for example, while an employee is on extended leave.
- On the main dashboard, select Revoke / Grant Access.
- The screen displays: "Select an employee to revoke or restore their access."
- Locate the employee. Their current Status is shown as Active.
- Optionally, enter a reason in the Reason for Revocation (Optional) field (for example, "On leave, Suspended, etc.").
- Select Revoke Access.
The employee's Enrollment Status changes to Access Revoked. Their fingerprint template remains stored on the device but is no longer recognized for attendance until access is restored.
Note: A revoked fingerprint is still recognized by the duplicate-detection system. If someone attempts to enroll the same fingerprint for a different employee, the enrollment is blocked.
Restore revoked access
Use this procedure to reinstate biometric access for an employee whose access was previously revoked.
- On the main dashboard, select Revoke / Grant Access.
- Locate the employee. Their Status shows Revoked, along with the revocation date and reason (if one was entered).
- Select Restore Access.
- The screen confirms: "This will restore biometric access for this employee."
- Confirm the action.
The employee's Enrollment Status returns to Enrolled and their fingerprint is recognized for attendance again.
Permanently unenroll an employee
Use this procedure to permanently delete all fingerprint data for an employee β for example, when an employee leaves the organization.
Important: This action is irreversible and cannot be undone. The screen displays the warning: "This will permanently delete all biometric fingerprint data for the selected employee. This action cannot be undone." Confirm only when you are certain you want to remove the employee's biometric data permanently.
- On the main dashboard, select Permanently Unenroll.
- Locate the employee in the list. Their Enrollment Status shows Enrolled.
- Select the employee. The confirmation screen displays: "You are about to permanently delete all biometric templates for [Employee Name]. This action is irreversible and cannot be undone."
- Confirm by selecting Unenroll.
The employee's Enrollment Status changes to Not Enrolled. All fingerprint templates for that employee are deleted from the device. The employee can be re-enrolled in the future if needed.
Cancel enrollment at any point
You can cancel an enrollment in progress at any point before it completes by selecting Cancel. No fingerprint data is stored when you cancel. The employee's enrollment status remains unchanged.
Tips
- Keep the scanner surface clean. Dust or residue on the scanner surface reduces scan quality and can cause enrollment failures. Wipe the surface before each enrollment session.
- Vary finger placement between scans. The application prompts multiple scans to build an accurate template. Slightly varying the angle and position of the finger between scans improves matching accuracy during attendance.
- Use duplicate detection. The Enable duplicate detection setting in Zenoti Biometrics settings prevents the same fingerprint from being enrolled for more than one employee, including employees with revoked access. Keep this setting enabled to prevent buddy punching and enrollment errors.
- Adjust match accuracy for your environment. The Match accuracy level setting (default 75%, recommended range 70β80%) controls how strictly fingerprints are matched. If valid employees are being rejected during attendance, lower the threshold slightly. If incorrect matches occur, raise it.
- Revoke rather than unenroll for temporary absences. If an employee is temporarily away, use Revoke Access rather than Permanently Unenroll. Revocation preserves the enrollment and can be reversed; permanent unenrollment cannot.
Troubleshooting
- The scanner is not detected when I try to enroll. The application displays "Cannot start attendance mode as scanner is not connected" or "Checking connection every 5 seconds..." if no scanner is found. Verify that the fingerprint scanner is physically connected to the Windows device and that the device recognizes it. The application checks for a connection every five seconds and starts automatically when a scanner is detected. If the scanner remains undetected, check the USB connection and restart the application.
- Enrollment is blocked with a duplicate fingerprint message. The application detected that the fingerprint being enrolled already matches an enrollment belonging to a different employee β including an employee whose access has been revoked. Each fingerprint can only be enrolled to one employee at a time. Ask the employee to use a different finger, or investigate whether the existing enrollment belongs to the correct employee before proceeding.
- The employee's fingerprint is not recognized during attendance after enrollment. First, confirm the employee's Enrollment Status shows Enrolled (not Access Revoked or Not Enrolled) in the Employee Management screen. If the status is correct but recognition fails consistently, the enrollment may have low quality. Re-enroll the employee, ensuring the scanner surface is clean and the employee varies finger placement between scans. You can also lower the Match accuracy level slightly in Settings > Biometric Device Settings if valid employees are being rejected.
- The Enroll New Employee button is disabled. The button is disabled when no scanner is connected. The tooltip displays "Cannot enroll employees as scanner is not connected." Connect the fingerprint scanner to the device and wait for the application to detect it before attempting enrollment.
- The Permanently Unenroll button is disabled. The button is disabled when there are no enrolled employees to unenroll. The tooltip displays "No enrolled employees to unenroll." Verify that the employee you want to unenroll has an Enrollment Status of Enrolled in the employee list.