Close a register and reconcile
Closing a register is the final step in the daily register lifecycle. You count the cash in the register drawer by denomination, enter totals for credit card and other payment types, compare your actual amounts against the system's expected amounts, explain any discrepancies, and submit the closure. The result is a complete financial snapshot of the register for the day β a record that serves as the basis for bank deposits, accounting entries, and cash accountability.
Audience: Front desk staff and managers who perform end-of-day register reconciliation.
On this page
- Before you begin
- When to close a register
- Pre-closure checks
- Close the register
- Denomination-level counting
- Expected amounts and how they are calculated
- Discrepancy handling
- Manager approval for large discrepancies
- Closure report
- Register lock after closure
- Bank deposit recording
- Editing a saved closure
- Cash adjustment vs. cash deposit β two separate paths
- Registers left open across multiple days
- Block payments if register not closed from previous day
- Close a register for a missed past date
- Opening count and tab visibility
- Tips
- Troubleshooting
- Related articles
Before you begin
To close a register, you need:
- Register Management 2.0 enabled at the organization level, then activated at the center level
- The Enhanced Register Closure Management setting enabled at the center level (controls visibility of sub-settings such as mid-day counts, petty cash, tips, and closure blocking)
- A register that is currently open for the business day
- All open invoices resolved (or the setting to allow closure with open items enabled)
- Physical access to the register drawer for cash counting
Permission: Allow close all registers (under Security Roles > [Role] > Permissions tab > Administrator > CashRegisters > Allow close all registers) β Required to close registers assigned to other employees. Without this permission, you can close only the register assigned to you.
Important: If the Enable Mandatory Opening of Register setting is active at your center, the Close tab is locked until a register has been opened for the business day. This setting also blocks cash payment processing until a register is open β it is not only a tab-visibility control.
Important: Cash collected while the register was never opened creates open cash invoices that block closure. Because an open cash invoice withholds the provider's payroll credit, resolving these invoices is a payroll matter, not merely a tidiness step. The Invoices affecting list on the Appointment Book shows exactly which invoices are blocking closure.
When to close a register
Close the register at the end of the business day or at the end of your shift. The closure should happen after all scheduled appointments have been completed, all invoices have been paid or voided, and no further cash transactions are expected for the day.
If your center uses shifts, each shift may have its own register closure. For example, the morning shift employee closes their register before the afternoon shift employee opens a fresh register session.
Timely register closure is important because it captures an accurate financial snapshot while details are fresh, prevents financial data from spanning multiple unclosed days, and ensures the register is ready to be opened cleanly the next morning.
Pre-closure checks
Before starting the closure process, resolve any outstanding items that could affect the register totals.
Resolve open invoices
The system checks for open (unpaid) invoices that are associated with the register for the current business date. Depending on your center's configuration, open invoices either block closure entirely or trigger a configured warning that you must acknowledge before proceeding. These are two different behaviors with different next actions:
- Configured warning (closure not blocked): A list of open invoices is displayed. You can review them and proceed with closure. The open invoices are carried forward.
- Configured block (closure prevented): You must resolve all listed invoices before the closure form becomes available. This setting applies independently of whether Enhanced Register Closure Management is enabled.
In the current experience, the blocking invoices screen displays a list of all open invoices with their source (cash, online, and similar). From this screen, you can:
- Click on an invoice to open point of sale (POS) and complete the payment or void the invoice
- Filter invoices by source to focus on specific payment channels
- After resolving each invoice, the list updates automatically
Once all blocking invoices are resolved, the closure proceeds.
If your center allows closure with open items, you can skip the blocking invoices and proceed directly to the closure form. The open invoices will be carried forward and associated with the next register session.
Verify mid-day transactions
Review any mid-day cash management activities (tip payouts, deposits, cash additions) that occurred during the day. These are already reflected in the expected totals, but verifying them before closure helps you understand any discrepancies that appear during reconciliation.
Close the register
- In the Appointment Book, click the Register Management icon in the right navigation panel.
- Navigate to the Close tab in the register slider.
- If your center has multiple registers, confirm that the correct register is selected.
- The system displays the expected amounts for each payment type. Review these expected values.
- Count cash by denomination. Use the denomination entry interface to count each bill and coin type in the register drawer. The system calculates the total cash amount from your denomination counts. Alternatively, enter the total cash amount directly.
- Enter credit card totals. Enter the total credit card amount from your credit card terminal batch reports. If the per-card-type breakdown setting is enabled, enter separate totals for each card type (Visa, Mastercard, American Express, and others).
- Enter other payment type totals. Enter totals for checks, custom payment types, and online banking, as applicable to your center.
- Review the adjustment column for each payment type. The adjustment is the difference between the expected amount and the actual amount you entered.
- Enter notes for discrepancies. For any payment type where the actual amount does not match the expected amount, enter notes explaining the discrepancy.
- Record deposit information. Enter the deposit amount (cash being set aside for the bank), the bank name, and any deposit notes. The deposit section appears in the Close Register tab body β it is not part of the Remove Cash flow.
- Click Close Register to submit the closure.
The system saves the closure record and locks the register. The Close tab status changes to completed.
Worked example: At end of day, the system shows an expected cash amount of $1,240.00. You count the drawer and find $1,255.00. You enter $1,255.00 in the cash field. The adjustment column shows +$15.00 (over). You enter a note: "Extra $15 found β likely a $20 received for a $5 service, change given as $5 instead of correct change." You record a deposit of $1,200.00 to First National Bank, leaving $55.00 as the float. You click Close Register. The closure record saves with the $15.00 over-adjustment and your note.
Denomination-level counting
Denomination counting provides a precise way to count the cash in the register. Instead of estimating or bundling the cash and entering a single total, you count each denomination separately:
| Denomination type | Examples |
|---|---|
| Bills | $100, $50, $20, $10, $5, $1 (or equivalent in your local currency) |
| Coins | $1, $0.50, $0.25, $0.10, $0.05, $0.01 (or equivalent in your local currency) |
The denomination list is configured based on your center's currency. For each denomination, you enter the quantity counted. The system multiplies each quantity by the denomination value and sums all denominations to produce the total cash amount.
The current interface offers two entry modes for denominations:
- Keypad mode. An interactive keypad where you tap denomination buttons and increment counts. This mode is designed for quick, hands-on counting at the register.
- Direct entry mode. Standard text fields where you type the count for each denomination. This mode is useful if you have already counted the denominations on paper.
Denomination data is saved with the closure record, creating a detailed audit trail that shows exactly how the cash total was composed.
Zenoti currently supports denomination counting for the following currencies: USD, AUD, CAD, EUR, GBP, NZD, ZAR, DKK, and CHF. If your center uses a different currency, denomination counting may not be available, and you will need to enter the total cash amount directly.
Expected amounts and how they are calculated
For each payment type, the system calculates an expected amount based on all transactions processed through the register during the business day.
Expected cash is calculated as:
Opening balance + Cash payments received - Cash refunds - Tip payouts - Petty cash expenses - Cash deposits made during the day - Cash paid out + Cash added + Cash transferred in - Cash transferred out
Expected credit card is the total of all credit card payments processed through the register. If the per-card-type breakdown is enabled, the system provides expected amounts for each card type separately.
Expected checks is the total of all check payments received.
Expected custom and online banking amounts are calculated from the corresponding payment types processed during the day.
The display of expected amounts during closure can be controlled by a center-level setting. When enabled, employees see the expected amounts alongside their entry fields, which helps them identify discrepancies in real time. When disabled, employees enter actual amounts without seeing expected values β this approach tests counting accuracy without anchoring to a target number.
If your center has enabled the auto-calculation of cash in register, the system uses the configured starting float as the opening cash balance and calculates the expected cash total automatically. You do not need to enter the opening cash amount manually.
Discrepancy handling
A discrepancy occurs when the actual amount you enter does not match the expected amount for any payment type. Discrepancies are calculated as:
Discrepancy = Actual amount - Expected amount
- Positive discrepancy (over): The register has more than expected. This may indicate an unrecorded refund, a counting error, or an unapplied discount.
- Negative discrepancy (short): The register has less than expected. This may indicate a counting error, a missed cash payment, a transaction error, or potential theft.
When a discrepancy exists, the system requires you to enter adjustment notes explaining the difference. These notes are stored with the closure record and are visible in the closure report. Every discrepancy should be documented, no matter how small. A pattern of unexplained discrepancies over time can signal a systemic issue that requires investigation.
Manager approval for large discrepancies
If a discrepancy exceeds the configured threshold for your center, the system may require manager approval before the closure can be submitted. The manager reviews the discrepancy amount, the employee's notes, and the transaction history before approving or rejecting the closure.
This safeguard prevents large discrepancies from being recorded without oversight. The manager approval requirement is configured at the center level and can be set separately for cash and non-cash payment types.
Closure report
After the register is closed, the system generates a closure report that summarizes the day's register activity. The closure report includes:
- Payment type breakdown. Expected, actual, and adjustment amounts for each payment type (cash, credit card, check, custom, online banking)
- Cash denomination detail. The denomination counts entered during closure
- Deposit summary. The deposit amount, bank name, and deposit notes
- Cash management activity. Cash added, cash paid out, and cash transferred during the day
- Petty cash summary. Total petty cash expenses deducted from the register
- Tip payout summary. Total tips paid out to providers during the day
- Closing balance. The final cash amount remaining in the register after all deductions and deposits
- Closure metadata. Who closed the register, the closure date and time, and any notes
The closure report can be printed in two formats, controlled by the register print size setting:
- A4 format. A detailed, full-page layout with columns for transaction type, expected, actual, and adjustment amounts. Includes a closure summary, deposit summary, emphasized closing balance, and a footer with "Closed by" information.
- Receipt format. A compact layout designed for receipt printers, with a simplified table showing type, actual, and adjustment columns.
Register lock after closure
Once a register is closed, it is locked for the business day. No new transactions can be processed against the closed register until it is reopened for the next business day. This prevents post-closure transactions from creating discrepancies in the already-reconciled financial record.
If a late transaction needs to be processed after closure, you must either reopen the register (which creates a new session) or process the transaction on a different open register.
Bank deposit recording
The closure process includes a section for recording bank deposit information. This section appears in the Close Register tab body β it is not accessible from the Remove Cash flow. This captures:
- Deposit amount. The amount of cash being deposited at the bank. This is typically the total cash collected during the day minus the float amount being left in the register for the next day.
- Bank name. The bank where the deposit will be made.
- Deposit notes. Any additional information about the deposit, such as a deposit slip number or the name of the person making the deposit.
Deposit information appears in the closure report and can be referenced against actual bank deposit records during accounting reconciliation.
Note: When Automatic Register Closure is enabled, Zenoti assumes Actual = Expected and closes the register automatically β it does not perform actual cash reconciliation. The system also sets the cash deposit to zero at closing. This means the opening balance will keep increasing if your organization relies only on automatic closure without manual deposits. To avoid this, manually close the register at the end of each shift and record appropriate deposits.
Automatic closure will not proceed if the Block the front-desk staff from closing the register option is selected under Register closure behavior when invoices are open and there are open invoices from the previous day's register. This setting applies even if the Enhanced Register Closure Management setting is disabled.
Editing a saved closure
You can edit a closure record after it has been saved. However, editing a saved closure clears all previously entered payment-type values β only the cash figure is retained. Every other payment type (credit card, check, custom, online banking) must be re-entered before you save again.
Important: This data loss is silent. The system does not warn you that non-cash values have been cleared when you open the edit form. If you save the edited closure without re-entering all payment types, those types will show a zero actual amount, which will appear as a reconciliation gap in the closure report. Always re-enter all payment type totals before saving an edited closure.
To edit a saved closure:
- Open the Register Closure Report from Reports.
- Locate the closure record you want to edit.
- Click the edit option for that record.
- Re-enter all payment type totals β do not assume any previously saved values are still present.
- Save the closure.
Cash adjustment vs. cash deposit β two separate paths
A cash adjustment and a cash deposit are distinct operations with different rules. They cannot be converted from one to the other after the register is closed.
Before the register is closed:
- Record a cash deposit in the deposit section of the Close Register tab body. This is the standard path for recording cash being sent to the bank as part of the EOD closure.
- Record a cash adjustment to document a discrepancy between expected and actual cash, with a note explaining the difference.
After the register is closed:
- A saved cash adjustment cannot be converted into a cash deposit. If you recorded an adjustment when you intended to record a deposit, you must correct this through the Register Closure Report by editing the closure record and entering the deposit information before saving.
- There is no mechanism to retroactively reclassify a closed adjustment as a deposit.
Use the correct path before closing the register to avoid reconciliation gaps.
Registers left open across multiple days
If a register is left open across more than one business day without being closed, it accumulates card totals and cash transactions for the entire period it was open. When you eventually close the register, the totals in the closure form will reflect the full multi-day window β not a single day's figures.
This creates a mismatch between the closure totals and any day-scoped reports (such as daily sales reports or daily payment summaries), which report on individual calendar days. The closure total will appear higher than any single day's report figures. This is expected behavior, not a reporting fault β the register window and the report window are different.
To avoid this situation, close the register at the end of every business day. If a register was left open for multiple days, close it and note the date range in the closure notes so that accounting can reconcile the multi-day total against the corresponding daily reports.
Block payments if register not closed from previous day
Zenoti includes an organization-level setting that blocks all payment processing if the register was not closed from the previous business day. When this setting is enabled:
- Front desk staff cannot process any payments β cash or non-cash β until the previous day's register is closed
- Cash additions and cash transfers are also blocked
- A message appears informing the employee that the register must be closed before payments can be taken
- A manager or authorized employee must close the outstanding register to unblock payments
This is a strict accountability measure that ensures registers are closed daily. It prevents the situation where register sessions span multiple days, which makes reconciliation significantly more difficult and reduces the reliability of daily financial reports.
Note: If your center is closed on a holiday, a separate center-level setting allows payments to be processed on that holiday even if the register was not closed the previous day. This prevents the holiday closure from blocking the first business day after the holiday.
Close a register for a missed past date
If a register was not closed on a previous business day, you can retroactively create a closure record using the Register Closure Report β you do not need to contact Support.
- Go to Reports and open the Register Closure Report.
- Click Add Closure.
- Select the register and the date that was missed.
- Enter the closure amounts for that date: cash, card totals, adjustments, and any notes.
- Click Save to submit the closure.
The closure record appears in the report for the selected past date.
Permission: You must have the Register Closure Report permission to see the Add Closure button. Contact your owner or administrator if the button is not visible.
Opening count and tab visibility
The Mid-day count and Close tabs are accessible by default in the register slider. They become locked only when the Enable Mandatory Opening of Register setting is active at your center and no opening count has been recorded for the business day. Once a register is opened and an opening count is saved, both tabs become available.
In the legacy register experience, the behavior differs: if you edit a closure after the cash figure has changed, the system generates an adjustment entry for the difference. This adjustment appears as a shortage in the drawer even though the drawer does not actually have a shortage. If you are using the legacy experience and see an unexpected shortage after editing a closure, this is the cause β the adjustment entry is a record of the change, not evidence of missing cash.
Tips
- Count cash before opening the closure form. Physically count and sort the drawer before navigating to the Close tab. Entering denomination counts while the form is open reduces errors and speeds up the process.
- Reconcile credit card totals from your terminal's batch report. The expected credit card amount in Zenoti is based on payments recorded in the system. Your physical terminal may show a slightly different total if any transactions were processed offline or if a terminal batch was not settled. Always compare against the terminal's own batch settlement report, not only the terminal's running total.
- Use closure notes to document anything unusual. If a provider took a cash tip directly, if a guest paid with a foreign currency, or if a cash drawer was opened for a non-sale reason, record it in the closure notes. These notes appear in the closure report and help explain discrepancies during accounting review.
- Do not rely on automatic closure as a substitute for manual reconciliation. Automatic closure assumes actual equals expected and sets the deposit to zero. Over time, this inflates the opening balance for each new day. Schedule at least a weekly manual closure to reset the balance and record actual deposits.
- Verify the correct register is selected before closing. In centers with multiple registers, closing the wrong register creates a closure record for a register that may still have open transactions, while leaving the intended register unclosed.
Troubleshooting
The Close tab is locked and I cannot access it.
The Enable Mandatory Opening of Register setting is active at your center, and no register has been opened for the business day. Open the register first using the Open tab in the Register Management slider. If you do not see the Open tab, contact your manager β you may not have the permission to open a register.
I see a list of open invoices and cannot proceed with closure.
Your center has the Block the front-desk staff from closing the register option selected under Register closure behavior when invoices are open. You must resolve each listed invoice before the closure form becomes available. Click on an invoice in the list to open it in POS, then complete the payment or void the invoice. After resolving all invoices, the closure form will become available. If you need to close the register despite open invoices, a manager must enable the setting to allow closure with open items β this cannot be bypassed by the front desk.
The cash total in my closure is much higher than today's sales.
The register was likely left open across multiple business days. The closure total reflects all transactions since the register was last closed, not only today's transactions. Close the register and note the date range in the closure notes. Day-scoped reports will show individual daily figures; the closure total covers the full open window. This is expected β see Registers left open across multiple days.
I edited a saved closure and now some payment types show zero.
Editing a saved closure clears all previously entered payment-type values except cash. You must re-enter all non-cash payment type totals before saving. If you have already saved with zeros, edit the closure again and re-enter all values. See Editing a saved closure for the full procedure.
Payments are blocked and staff cannot process transactions.
The organization-level setting that blocks payments when the previous day's register is not closed is active. A manager or authorized employee must close the previous day's register to unblock payments. Go to Reports > Register Closure Report, locate the unclosed register session, and use Add Closure to create a retroactive closure record.
The provider's payroll credit is missing for a cash appointment.
Cash was collected while the register was never opened, which created an open cash invoice. An open cash invoice withholds the provider's payroll credit until the invoice is closed. Use the Invoices affecting list on the Appointment Book to identify which invoices are blocking, then complete or void each one. After the invoices are closed, the payroll credit will be applied.
After editing a closure in the legacy experience, a shortage appeared that was not there before.
In the legacy register experience, editing a closure after the cash figure has changed generates an adjustment entry for the difference. This entry appears as a shortage even though the drawer does not have missing cash. The adjustment records the change in the cash figure β it is not evidence of a discrepancy in the physical drawer. Document the adjustment in your closure notes and reconcile against the original closure record.