ZenotiHelp

Open a register and set opening balance

ZTZenoti Docs Team Updated September 17, 2026 12 min readGuide

Opening a register establishes a tracked cash session for the business day or shift. You set an opening balance β€” the cash float placed in the register drawer to make change β€” and optionally count it by denomination. Once the register is open, the system tracks every cash transaction against it, building the expected totals used for reconciliation at closure.

Note: For conceptual background on register management, see Register management overview.


On this page


Before you begin

To open a register, you need:

  • At least one cash register created for your center. Navigate to Configuration > POS > Register management > Cash register at the center level and click Add to create registers. Each register requires a Code (required), Name (required), and optionally a Description. You can also enable Invoice Mirroring (which allows guests to review invoices and add tips on a secondary display) and set the register as Active.
  • Multiple registers enabled at the organization level (if your center uses more than one register). The Enable multiple cash registers setting must be on at the organization level.
  • Access to the Appointment Book.

Permission: Open Cash Register β€” Required to open a register session. Navigate to Security Roles > [Role] > Permissions tab > Administrator > CashRegisters > Open Cash Register to enable this permission.

If your center uses the current register experience, the enhanced register management setting must be enabled at the organization level before it can be activated at the center level. Contact your Zenoti administrator to confirm these settings are active.

Important: If the Block taking payments if register is not closed the previous day setting is enabled, cash additions, cash transfers, and payment processing are all blocked until the previous day's register is closed. Resolve any outstanding register sessions before starting a new day.

When to open a register

Open your register at the start of each business day or shift, before processing any transactions. The register opening establishes the baseline for cash tracking. All cash payments received during the day are recorded against the open register, and the system uses the opening balance as the starting point for calculating expected cash totals.

If your center uses the mandatory register opening setting, the system enforces this by blocking both the Mid-Day and Close tabs and cash payments at point of sale until a register is open. Attempting to process a cash payment without an open register displays a prompt to open one first.

Open a register

In the register experience, opening a register is the first tab in the register management slider.

  1. In the Appointment Book, click the Register Management icon in the right navigation panel to open the register slider.
  2. The slider opens to the Open tab. If your center has multiple registers, select the register you want to open from the register dropdown at the top of the panel.
  3. Enter the opening balance β€” the total cash amount being placed in the register drawer.
  4. Optionally, enter a denomination breakdown of the opening balance. You can use the denomination keypad to count individual bills and coins, or type the total amount directly.
  5. Add any notes about the opening (for example, "Verified against previous day close" or "Starting with standard float").
  6. Click Open Register to confirm.

The Open tab status changes to completed, and the register is now active and ready to accept transactions.

Note: The Mid-Day and Close tabs are accessible without opening the register by default. They are locked only when the Enable Mandatory Opening of Register setting is enabled for your center and the register has not yet been opened.

Tip: If your center has a single default register, it is pre-selected automatically and you do not need to choose from a dropdown.

Set the opening balance

The opening balance is the cash float β€” the amount of money placed in the register drawer at the start of the day to make change for guests. This is not revenue; it is working capital that should be the same amount each day (or close to it).

The figure shown as the expected opening amount is carried forward automatically from the previous day's closure β€” it is not a field you type at opening. The Opening balance and Counted opening balance entries you make at open are a count of what is physically present in the drawer, not a correction of the expected figure. If the expected figure looks wrong, see Correct a wrong expected opening figure below.

When setting the opening balance:

  • Count the cash before entering the amount. Physically count the bills and coins in the register drawer and enter the actual counted amount. Do not assume the amount is correct from the previous close.
  • Use denomination counting for accuracy. The denomination entry interface lets you enter the count of each bill and coin type (for example, 10 Γ— $20 bills, 15 Γ— $10 bills, 20 Γ— $5 bills). The system calculates the total automatically. This approach catches counting errors that a single total entry might miss.
  • Use a consistent float amount. Most centers use a standard cash float (for example, $200 or $300) that is the same every day. This lets you verify that the opening balance matches expectations.

If your center has the auto-calculation of cash in register setting enabled, the system uses a configured starting float amount as a reference. This helps standardize opening balances across registers and shifts.

Worked example: Your center uses a standard $250 float. At opening, you count 3 Γ— $50 bills, 5 Γ— $10 bills, 8 Γ— $5 bills, and 10 Γ— $1 bills. You enter each denomination in the keypad: the system calculates $150 + $50 + $40 + $10 = $250 total. The over/short indicator shows $0.00, confirming the drawer matches the expected float before you click Open Register.

Verify the opening balance against the previous close

When a register was closed the previous day, the closing balance from that session provides a reference point for the next day's opening balance. You can review the previous day's closure data using the Register Closure Report to verify that the opening balance matches the expected carry-over amount.

To verify:

  1. Before opening the register, review the previous day's closure record in the Register Closure Report. This report shows the cash drawer balance at the time of closure.
  2. Count the cash in the register drawer.
  3. Compare the counted amount with the previous day's closing balance. If the amounts match, enter the opening balance with confidence. If they do not match, investigate the discrepancy before opening the register and note the difference in the opening notes field.

This verification step catches discrepancies that occurred between closing the register the previous day and opening it today, such as unauthorized access to the register drawer overnight.

Correct a wrong expected opening figure

The expected opening figure is inherited from the previous day's closure β€” there is no field on the open register screen to edit it directly. If the figure appears incorrect, the correction must be made on the previous day's closure record, not at the time of opening.

To correct the expected opening figure:

  1. Open the Register Closure Report.
  2. Select the register and the date of the closure you need to correct.
  3. Click Refresh to load the closure data.
  4. Edit the cash count for that closure and save.

The correction applies at the center level and updates the figure that carries forward to the next opening. After saving, the expected opening amount on the Open tab will reflect the corrected value.

Note: Only users with the appropriate permissions can edit a past closure record. Contact your administrator if you do not have access to the Register Closure Report.

Register assignment

Before opening a register, you must be assigned to one. Register assignment determines which register records your transactions and which register you close at the end of your shift.

There are three ways registers are assigned:

Automatic assignment by user. When the Auto-select cash register organization-level setting is configured to assign based on the logged-in user, the system automatically assigns you to the register you last used. This is not a manual per-session choice β€” it is an organization-level setting configured at Configuration > POS > Essentials that applies consistently. This is the most common configuration for centers where each employee consistently uses the same register.

Automatic assignment by machine. When the auto-select cash register setting is configured to assign based on machine, the register is determined by the computer or terminal you are using. This is useful for centers where registers are tied to physical workstations rather than individual employees.

Manual assignment. If automatic assignment is not configured, you select your register from the assignment dialog when you access the Appointment Book. The register selector shows all available registers for the center.

In centers with a single register, the default register is assigned automatically, and you do not need to select one.

Important: Each employee can have only one active register assignment at a time. If you need to access the register from a different terminal, you must log off from the first computer before the system will allow you to open the register management slider on the second terminal.

What happens if the register is already open

If you access the register management slider and the register is already open (from the current or a previous day), the system recognizes the existing session:

  • Open from today: The Open tab shows as completed. You proceed directly to the Mid-Day or Close tab for ongoing operations.
  • Open from a previous day (not closed): The system detects that the register was not closed from the previous business day. If the Block taking payments if register is not closed the previous day setting is enabled, front desk staff cannot process any payments β€” including cash additions and cash transfers β€” until someone with the appropriate permissions closes the outstanding register session. This setting encourages timely register closure and prevents financial data from spanning multiple unclosed days.

Mandatory register opening

The mandatory register opening setting enforces a strict register workflow by requiring that a register be opened before the Mid-Day and Close tabs become accessible and before cash payments can be processed. When this setting is enabled at the center level:

  • The Mid-Day and Close tabs in the register management slider are locked until a register is opened.
  • Cash payments at point of sale are blocked until a register is open. Attempting to process a cash payment without an open register displays a prompt to open one first.
  • Each center can independently choose whether to enforce mandatory opening β€” the setting is configured at the center level.

Note: A separate organization-level setting, Block taking payments if register is not closed the previous day, further restricts cash additions, cash transfers, and payment processing until the previous day's register is closed. See Manage multiple registers for details.

Viewing a past date in the register

When you navigate the register slider to a past date, the system displays a read-only view of that day's register activity. In this view:

  • The Open Register controls are not shown.
  • Register management actions (such as opening, adding cash, or removing cash) are not available.
  • The register may appear broken or incomplete β€” this is expected behavior for a historical date view, not an error.

To restore the register controls and management actions, return to today's date. The slider will display the current session with all controls active.

Tip: If the register controls are missing and you are not intentionally viewing a past date, check whether the date selector in the slider has been changed. Returning to today's date restores normal operation.


Tips

  • Establish a standard float amount and document it. Agree on a consistent opening balance (for example, $200) and communicate it to all front desk staff. A predictable float makes it straightforward to spot discrepancies at opening without needing to reference the previous day's closure report every time.
  • Use denomination counting every time, not only when amounts look wrong. Entering denominations individually takes an extra minute but catches errors β€” a misread bill or a coin roll counted twice β€” before the register is open and transactions begin. Errors caught at opening are far easier to resolve than discrepancies discovered at closure.
  • Review the Register Closure Report before opening if the previous day's register was closed by someone else. If a manager or another staff member closed the register at end of day, verify the closing balance in the Register Closure Report before entering your opening balance. This ensures continuity and surfaces any overnight discrepancies early.
  • Log off before switching terminals. If you need to move to a different workstation, log off from the current computer first. The system enforces a single active register assignment per employee β€” attempting to open the register management slider on a second terminal without logging off from the first will not work.
  • Add descriptive opening notes. Use the notes field to record anything relevant to the opening β€” a discrepancy from the previous close, a float adjustment, or a shift handover note. These notes appear in the register log and are useful during audits or when investigating end-of-day variances.
  • Correct expected opening figures through the Register Closure Report, not at the open screen. If the expected opening amount looks wrong, the open screen has no field to fix it. Use the Register Closure Report to edit the previous day's cash count and save β€” the corrected figure carries forward automatically.

Troubleshooting

The Open tab is not visible or the register slider does not open. The current register experience requires the enhanced register management setting to be enabled at the organization level before it can be activated at the center level. If the slider is missing or the Open tab does not appear, contact your Zenoti administrator to confirm both settings are active for your organization and center.

The register dropdown is empty β€” no registers appear to select. No cash registers have been created for your center, or the Enable multiple cash registers organization-level setting is not enabled. Navigate to Configuration > POS > Register management > Cash register to create a register, or ask your administrator to enable multiple registers if your center requires more than one.

Cash payments are blocked even though I opened the register. If cash payments remain blocked after opening the register, check whether the Block taking payments if register is not closed the previous day setting is enabled. A register from a previous business day may still be open. A manager or administrator with the appropriate permissions must close the outstanding session before payments can proceed.

The Open tab shows as completed but I did not open the register today. Another employee or an automatic process may have opened the register before your shift. Check the register log (accessible from the register management slider) to see who opened the register and at what time. If the register was opened in error or by the wrong employee, contact your administrator.

I cannot access the register from a second terminal after moving workstations. The system enforces a single active register assignment per employee. Log off from the first terminal completely before attempting to open the register management slider on the second terminal. If you are unable to log off from the first terminal remotely, contact your administrator to clear the assignment.

The register controls are missing β€” I cannot see the Open Register button or any management actions. The register slider may be displaying a past date rather than today. When a past date is selected, the slider shows a read-only view of that day's activity with no open or management controls. Return to today's date using the date selector in the slider to restore all register controls.

The expected opening figure looks wrong and I cannot find a field to correct it on the Open tab. The expected opening figure is carried forward from the previous day's closure β€” there is no edit field for it on the open screen. To correct it, open the Register Closure Report, select the register and the previous day's date, refresh the data, edit the cash count, and save. The corrected figure will carry forward to the next opening.


Was this article helpful?
Your feedback helps us improve our documentation.