Manage multiple registers
Centers with multiple front desk stations, checkout counters, or workstations can configure multiple cash registers in Zenoti. Each register operates as an independent cash tracking unit with its own opening balance, transaction history, and closure process. This article covers how to set up, assign, and manage multiple registers at your center.
Audience: Front desk staff and administrators who manage register assignments and cash operations at multi-register centers.
On this page
- Before you begin
- When to use multiple registers
- Create registers in settings
- Assign registers to employees
- Automatic register selection
- Switch between registers
- Independent closure
- Transfer cash between registers
- View all open registers and their status
- Security and access control
- Important operational notes
- Tips
- Troubleshooting
- Related articles
Before you begin
To configure and manage multiple registers, you need:
- The Enable multiple cash registers setting enabled at the organization level (Configuration > POS > Essentials)
- Administrator access to create registers at the center level (Configuration > POS)
- The current register experience enabled for the full multi-register management interface
Permission: To open a register session, your role must have the Open Cash Register permission (Security Roles > [Role] > Permissions tab > CashRegisters section). To close any register at the center, you need the Allow close all registers permission in the same section. To transfer cash between registers, you need the Transfer cash permission (Security Roles > [Role] > Permissions tab > Administrator section > Cash Management).
Important: If the Block taking payments if register is not closed the previous day setting is enabled, cash additions, cash transfers, and payment processing are all blocked until the previous day's register is closed. This applies to all registers at the center.
Legacy experience: In the legacy register experience, register creation, assignment, switching, and cash transfers were performed in the Close Payments popup (Appointment Book > More > Close Payments; the popup title reads Close Payments - [register name] and has a Cash Register drop-down), the Manage Cash dialog (Transfer Cash / Pay Out Cash / Add Cash), and the legacy admin pages. The conceptual model (one open register per employee, per-register cash tracking, independent closure) is the same in both experiences, but the multi-register slider, "View all open registers" status panel, and inline transfer flow described in this article apply to the current Register Management experience only. Contact your Zenoti representative if your center has not yet transitioned.
When to use multiple registers
Multiple registers are useful in the following scenarios:
- Multiple front desk stations. Large centers with two or more front desk positions where different employees process transactions simultaneously. Each station has its own register for independent cash tracking.
- Different checkout areas. Centers with separate checkout areas (for example, a main front desk and a retail counter) where cash needs to be tracked independently.
- Shift-based operations. Centers where each shift has its own register, allowing the outgoing shift to close their register while the incoming shift opens a fresh one without interruption.
- High-volume centers. Busy locations where splitting transactions across registers reduces congestion and spreads responsibility for cash handling.
If your center has only one front desk station or does not need independent cash tracking per workstation, a single default register is sufficient.
Create registers in settings
Registers are created at the center level. Each register requires a unique code and a unique name within the center.
To create a register:
Navigate to Configuration > POS for the center where you want to create the register.
Click Add Register (or the equivalent action to create a new register).
Enter the following details:
- Code β A unique short identifier for the register (for example, "REG-01", "FRONT-A", "RETAIL"). The system enforces uniqueness β no two registers at the same center can share a code.
- Name β A descriptive name for the register (for example, "Front Desk Register 1", "Retail Counter"). The system enforces uniqueness β no two registers at the same center can share a name.
- Description β (Optional) A longer description of the register's purpose or location. Accepts up to 1,024 characters.
- Enable Invoice Mirroring β Select this checkbox to allow guests to review the invoice and add tips on a customer-facing display connected to this register.
- Active β Select to make the register available for use. Deselect to deactivate a register that is no longer in use.
Save the register.
Repeat for each register you need at the center.
You can also deactivate a register if it is no longer in use. Deactivated registers do not appear in the register selection list but retain their historical data for audit purposes.
Worked example: A spa with two front desk stations creates two registers: Code "FD-01", Name "Front Desk North" (with Invoice Mirroring enabled for the guest-facing screen) and Code "FD-02", Name "Front Desk South" (no mirroring, staff-only terminal). Each register tracks its own cash independently and closes separately at end of day.
Assign registers to employees
When multiple registers are enabled, each employee must be assigned to a register before processing transactions. The register assignment determines which register records an employee's cash transactions and which register the employee closes at the end of their shift.
There are two ways to assign registers:
From the appointment book. When an employee opens the appointment book and no register is currently assigned, the system prompts them to select a register from the available registers at the center. The employee selects their register, and the system records the assignment.
Through automatic selection. The system can automatically assign registers based on configurable rules, eliminating the need for manual selection at the start of each day. See Automatic register selection below.
An employee's register assignment persists across browser sessions until it is explicitly changed. If an employee used Register A yesterday, the system assigns them to Register A again today (when auto-select by user is enabled).
Automatic register selection
Zenoti provides the Auto-select cash register setting that assigns registers without manual intervention. This is an organization-level setting configured at Configuration > POS > Essentials. It supports two modes:
Assign by logged-in user
When automatic selection is set to assign by logged-in user, the system assigns each employee to the register they used most recently. This is the preferred mode for centers where employees consistently use the same workstation or register.
How it works:
- Employee logs into the Zenoti admin interface and opens the appointment book.
- The system checks the employee's last register assignment.
- If a previous assignment exists, the system automatically assigns the same register.
- If no previous assignment exists (new employee or first-time login), the system prompts the employee to select a register manually.
Assign by machine
When automatic selection is set to assign by machine, the register is determined by the computer, terminal, or browser being used. This is useful for centers where registers are tied to physical workstations β regardless of which employee logs in at a workstation, the same register is always used.
How it works:
- Employee logs in at a specific workstation.
- The system identifies the machine (based on browser and session information) and assigns the register previously associated with that machine.
- If no register has been associated with the machine, the system prompts for manual selection, and the choice is saved for future logins on that machine.
Choose the assignment mode that matches your center's operational model. Centers where employees rotate between workstations should use assignment by user. Centers where workstations are fixed positions should use assignment by machine.
Switch between registers
An employee can switch to a different register when needed, such as when covering for a colleague or moving to a different workstation.
To switch registers:
- In the appointment book, access the register assignment or register management interface.
- Select the new register from the list of available registers at the center.
- Confirm the switch. The system updates the employee's register assignment.
After switching, all subsequent cash transactions are recorded against the new register. Previous transactions remain with the original register and are not moved.
In the register slider, you can also select a different register from the register dropdown at the top of the panel. This lets you view the status of other registers or perform operations on a register other than your assigned one (if you have the appropriate permissions).
Important: An employee must log off from one computer before accessing the cash register from a different terminal. The system enforces a single active register assignment per employee β an employee cannot be logged into two terminals with register access simultaneously.
Independent closure
Each register in a multi-register center closes independently. This means:
- Register A can be closed at the end of the morning shift while Register B remains open for the afternoon shift.
- Each register has its own closure record with its own expected amounts, actual counts, and discrepancy notes.
- Closing one register does not affect the operations of any other register at the center.
- Each register's closure report reflects only the transactions processed through that specific register.
When closing a register in a multi-register environment, make sure you have the correct register selected. The register slider displays the register name prominently at the top of the panel to help you confirm which register you are closing.
If you have the Allow close all registers permission, you can close any register at the center, not only the one assigned to you. This is useful for managers who need to close registers for employees who have already left for the day.
Note: Automatic register closure respects the Block the front-desk staff from closing the register option of the Register closure behavior when invoices are open setting. When this option is selected, a register cannot be closed β automatically or manually β while invoices remain open. Resolve all open invoices before closing the register.
Transfer cash between registers
When one register is running low on change and another has excess cash, you can transfer cash between registers. A transfer deducts cash from the source register and adds it to the destination register.
To transfer cash:
- In the Manage Register window, click Remove Cash from the sidebar.
- In the Remove Cash window, select Register Transfer.
- Select the destination register from the list of other open registers.
- Enter the transfer amount.
- Add notes describing the reason for the transfer (for example, "Transferring $100 in small bills to Register B").
- Confirm the transfer.
The system records the transfer as a deduction on the source register and an addition on the destination register. Both entries appear in the respective closure reports, maintaining a complete audit trail.
Permission: Your role must have the Transfer cash permission enabled (Security Roles > [Role] > Permissions tab > Administrator section > Cash Management).
Note: The Register Transfer option is available only when the current register experience is active and the organization-level register management setting is enabled. If you do not see the Register Transfer tab in the Remove Cash window, confirm that both the organization-level and center-level register management settings are enabled.
View all open registers and their status
Managers and authorized employees can view the status of all registers at the center without switching their own register assignment. The register dropdown in the register slider shows each register along with its current state:
- Open: The register has an active session and is accepting transactions.
- Closed: The register has been closed for the current business day.
- Not opened: The register has not been opened for the current day.
This visibility helps managers monitor which registers are active, which need to be closed, and whether any registers have been left open from a previous day.
Tip: To verify the details of a previous day's closure for any register, use the Register Closure Report rather than the register slider. The slider shows current-day status only.
Security and access control
Multiple register support includes several security controls to ensure proper cash handling:
Register-specific permissions. The following permissions control access to register operations. All permissions are configured at the organization level under Security Roles > [Role] > Permissions tab:
| Permission (Section > Permission) | Controls |
|---|---|
| CashRegisters > Open Cash Register | Who can open a register session |
| CashRegisters > Allow close all registers | Who can close any register (not only their own) |
| CashRegisters > Pay out stylists more tips than earned | Who can pay out more tips than earned via the register |
| Administrator > Cash Management > Add cash | Who can add cash to a register |
| Administrator > Cash Management > Payout cash | Who can pay out cash from a register |
| Administrator > Cash Management > Transfer cash | Who can transfer cash between registers |
Assignment enforcement. When automatic register selection is active, employees are constrained to their assigned register. They cannot accidentally process transactions on someone else's register.
Closure accountability. Each closure record includes the name of the employee who performed the closure and the timestamp. This creates an audit trail showing who was responsible for each register's reconciliation.
Context menu access. The right-click context menu in the appointment book, which provides quick access to register operations like petty cash and cash management, can be restricted by the ContextMenu permission setting. This prevents unauthorized access to cash operations from the appointment book.
Important operational notes
Block taking payments if register is not closed the previous day. If the Block taking payments if register is not closed the previous day setting is enabled (Configuration > POS > Invoices > Basic invoice actions), cash additions, cash transfers, and payment processing are all blocked until the previous day's register is closed. This applies to all registers at the center.
Mandatory register opening. When the Enable Mandatory Opening of Register setting is active at the center level, employees must open their register before the Mid-Day and Close tabs become accessible. In addition, cash payment processing is blocked until the register is opened. Both tab access and cash payments are gated by this setting β not tab access alone.
Deleting cash entries. Cash entries (add cash, remove cash) can be deleted, but only before the register is closed for the day. Once the register is closed, all entries are locked and cannot be modified.
Switching computers. If an employee needs to collect payment from a different computer, they must log off from the first computer and log into the second one to access the cash register from that terminal. The system enforces a single active register assignment per employee β an employee cannot be logged into two terminals with register access simultaneously.
Tips
- Name registers by location, not by employee. Use names like "Front Desk North" or "Retail Counter" rather than employee names. This makes register management consistent when staff rotate or leave.
- Enable Invoice Mirroring on guest-facing registers. If a register has a customer-facing display, select the Enable Invoice Mirroring checkbox when creating the register. This allows guests to review their invoice and add a tip directly, reducing disputes and improving the checkout experience.
- Use "Assign by machine" for fixed workstations. If your center's registers are tied to specific physical terminals, the machine-based auto-select mode eliminates the daily prompt for employees to choose a register. This reduces errors and speeds up the start-of-day process.
- Close registers in shift order. In shift-based operations, have each shift close its own register before leaving. This keeps closure records accurate and prevents the next shift from inheriting unresolved discrepancies.
- Use the Register Closure Report to verify previous-day closures. The register slider shows current-day status only. For historical closure details, open the Register Closure Report, which provides a full breakdown of expected versus actual amounts for any past closure.
Troubleshooting
An employee cannot see the register selection prompt when logging in. The register selection prompt only appears when the Enable multiple cash registers setting is enabled at the organization level and the employee's center has at least two active registers. Verify both conditions in Configuration > POS > Essentials and Configuration > POS for the center.
The Register Transfer tab does not appear in the Remove Cash window. Register Transfer is available only when the current register experience is active at both the organization and center level. If the tab is missing, confirm that the organization-level register management setting and the center-level enhanced register management setting are both enabled. If both are enabled and the tab is still absent, contact your Zenoti representative.
An employee is blocked from processing cash payments even though their register is open. Check whether the Block taking payments if register is not closed the previous day setting is enabled. If the previous day's register was not closed, cash payments are blocked for all employees at the center until that register is closed. Identify the unclosed register using the register status dropdown in the register slider and close it before resuming operations.
An employee cannot access the Mid-Day or Close tabs. These tabs are accessible by default. They are locked only when the Enable Mandatory Opening of Register setting is active at the center level and the employee has not yet opened their register for the day. Have the employee open their register first. Note that this setting also blocks cash payment processing until the register is opened β not tab access alone.
An employee's register assignment switched unexpectedly. If the Auto-select cash register setting is configured to assign by machine, logging in from a different computer will assign the register associated with that machine rather than the employee's usual register. Have the employee log off and return to their regular workstation, or manually reassign the register from the appointment book.