ZenotiHelp

Void and reopen invoices

ZTZenoti Docs Team Updated October 26, 2026 19 min readGuide

After an invoice is closed, there are situations where you need to reverse or correct the transaction. Zenoti provides two options: voiding the invoice (which reverses all payments and financial entries) and reopening the invoice (which returns it to an editable state for corrections). This article explains when to use each option, the workflows involved, and the restrictions that apply.

Audience: Front desk staff and managers who need to correct or reverse closed invoices.


On this page


Before you begin

Permission: Void (Security Roles > [Role] > Permissions tab > Appointments > Void) โ€” Required to void a closed invoice. This permission is typically restricted to managers and senior staff.

Permission: Reopen Invoice (Security Roles > [Role] > Permissions tab > Appointments > Reopen Invoice) โ€” Required to reopen a closed invoice for editing.

Legacy experience: In the legacy POS, void and reopen actions were available from the full-page billing dialog rather than from the three-dot menu > "I want to" path described in this article. The financial impact (payment reversal for void, return-to-editable for reopen) is identical in both experiences. Contact your Zenoti representative if your center has not yet transitioned.

  • The invoice must be in a Closed status before you can void or reopen it. Open invoices do not need to be voided โ€” you can edit them directly.
  • Voiding requires comments. Ensure you have a clear justification before proceeding, as voids are permanent and logged in the audit trail.
  • Reopening an invoice is only possible if the invoice is not within a financial lock period and the associated register has not been closed (depending on your organization's settings).

Void vs. reopen: when to use each

Voiding and reopening serve different purposes. Choose the correct action based on the situation:

Situation Recommended action Why
The transaction was processed entirely in error (wrong guest, wrong services, duplicate invoice). Void Voiding reverses all payments and financial entries, effectively nullifying the transaction.
A payment was applied to the wrong payment method (cash instead of card). Reopen Reopening lets you cancel the incorrect payment and apply the correct one, then re-close the invoice.
A discount was missed during checkout. Reopen Reopening lets you add the discount, adjust the total, and re-close the invoice.
A line item needs to be added or removed after close. Reopen Reopening returns the invoice to an editable state where you can modify line items.
You need to split a charge into separate services, or a guest asks for a more itemized invoice. Reopen Reopening is how you split or itemize a closed invoice โ€” reopen it, restructure the line items, and re-close.
The guest disputes the entire charge and you need to reverse everything. Void Voiding reverses all financial entries in one action.
The appointment and all associated records need to be reversed. Void Voiding the invoice also voids the associated appointment.

As a general rule: use void when the entire transaction should not have occurred, and use reopen when the transaction is valid but needs corrections.

What voiding does

When you void a closed invoice, the system performs the following actions:

  • Reverses all payments โ€” Every payment transaction (cash, card, gift card, loyalty points, membership credits, etc.) linked to the invoice is reversed. Card payment reversals are sent to the payment processor as refund transactions.
  • Reverses financial entries โ€” All revenue, tax, and commission entries associated with the invoice are reversed in the financial records.
  • Deactivates sold items โ€” If the invoice included a membership sale, the membership is deactivated. If it included a package sale, the package is deactivated and any redeemed benefits are reversed. If it included a gift card sale, the gift card is deactivated.
  • Voids the appointment โ€” The associated appointment status changes to Voided. A voided appointment cannot be restored.
  • Sets invoice status to Voided โ€” The invoice status changes to Voided. A voided invoice cannot be further modified, reopened, or re-voided.

Voiding is a permanent action. Once an invoice is voided, it cannot be undone. If the services were actually delivered and payment is still needed, you must create a new appointment and invoice.

Void an invoice

To void a closed invoice:

Option 1 โ€” From the Invoice and Payment details window:

  1. Open the closed invoice in point of sale (POS). You can navigate to the closed invoice from the appointment context panel, the Appointment Book, or the guest's invoice list.
  2. Select I want to > Void Invoice from the Invoice and Payment details window.
  3. Enter comments explaining why the invoice is being voided. Comments are required and become part of the audit record.
  4. Click Submit to execute the void.
  5. The system processes the void: reverses all payments, updates financial records, deactivates any sold memberships, packages, or gift cards, and sets the invoice status to Voided.
  6. The appointment status changes to Voided.
  7. POS displays a confirmation that the void has been completed.

Option 2 โ€” From the Appointment Book:

  1. In the Appointment Book, locate the paid appointment.
  2. Click the three-dot menu (โ‹ฎ) on the appointment in the appointment context panel.
  3. Select Void Invoice from the menu. You do not need to open the invoice first.
  4. The system prompts you to enter comments.
  5. Click Submit to execute the void.

Important: Void requires comments only โ€” there is no reason dropdown or reason selection. Enter a clear description of why the invoice is being voided, as this becomes the permanent audit record.

Note: If the invoice included card payments, the payment reversal is sent to your payment processor. Depending on the processor, the refund may take several business days to appear on the guest's statement.

Worked example: A front desk manager discovers that a massage service was invoiced twice for the same guest on the same day. She opens the duplicate closed invoice from the Appointment Book, selects I want to > Void Invoice, enters the comment "Duplicate invoice โ€” service charged twice on 2026-06-15, original invoice #10042 is correct," and clicks Submit. The system reverses the card payment, voids the appointment, and records the action in the audit log.

Void restrictions

The system enforces several restrictions on voiding invoices:

Financial lock period

If your organization has configured a financial lock period (a date range after which transactions cannot be modified), you cannot void invoices that fall within the locked period. This prevents changes to finalized accounting records.

Register closure

Depending on your organization's settings, you may not be able to void an invoice if the cash register associated with the original transaction has been closed for the day. The register closure finalizes cash reconciliation, and voiding a transaction after closure would create a discrepancy.

Permission requirements

Only users with the Void permission (Security Roles > [Role] > Permissions tab > Appointments > Void) can perform this action. If you do not see the Void option on a closed invoice, contact your manager or administrator to request the appropriate permission.

Compliance restrictions

In regions where e-invoicing compliance is enabled (France NF525, Saudi Arabia ZATCA, Malaysia, Spain), voiding may be subject to additional restrictions. Voided invoices may still need to be reported to the compliance authority, and the void creates a separate compliance record rather than deleting the original.

What reopening does

When you reopen a closed invoice, the system returns the invoice to an editable, open state:

  • Invoice becomes editable โ€” You can add, edit, or remove line items, apply or remove discounts, and modify prices.
  • Existing payments are preserved โ€” Unlike voiding, reopening does not reverse the existing payment transactions. The payments remain on the invoice.
  • You can cancel and re-add payments โ€” If a payment needs to be corrected (for example, changing the payment method), you can cancel the incorrect payment transaction and apply a new one.
  • Appointment status returns to active โ€” The associated appointment returns to an active status (typically Completed or Checked-in), allowing further edits.

After making corrections, you close the invoice again through the normal payment and close workflow.

Tip: If a guest asks you to "split" a closed invoice into separate services, or to provide a more "itemized" invoice, reopening is the mechanism. Reopen the invoice, restructure the line items as needed, and re-close.

Reopen an invoice

To reopen a closed invoice:

Option 1 โ€” From the Appointment Book (three-dot menu):

  1. In the Appointment Book, locate the paid appointment.

  2. Click the three-dot menu (โ‹ฎ) on the appointment in the appointment context panel.

  3. Select Reopen from the menu.

  4. Enter authorization credentials if required and add comments.

    Note: The system returns the invoice to an open state.

Option 2 โ€” From the Invoice and Payment details window:

  1. Search for the invoice via an open time slot in the Appointment Book, or navigate to the invoice via the Payments tab on the guest's profile.

  2. Select Reopen from the I want to list.

  3. Enter authorization credentials if required and add comments.

    Note: The system returns the invoice to an open state.

After reopening:

  1. Make the necessary corrections:
    • Add or remove line items as needed.
    • Adjust prices or discounts.
    • Cancel incorrect payments and apply correct ones.
  2. Once corrections are complete, proceed to the payment screen.
  3. Verify the due amount (which may be zero if payments were not modified, or may show a balance if line items were changed).
  4. Collect any additional payment needed and close the invoice.

Note: If you remove a line item that was partially paid by a specific payment method (such as a membership credit), the system recalculates the eligible payment amounts. You may need to cancel and reapply certain payments.

Worked example: A guest was charged $120 for a facial but the correct price was $100. The front desk reopens the invoice from the Appointment Book three-dot menu, selects Reopen, adjusts the facial price from $120 to $100, then refunds the $20 difference to the guest's card before re-closing the invoice. The closed date is then manually reset to the original date to preserve the correct commission pay period.

Important notes about reopening

  • Closed date changes: After reopening and making changes, the closed date changes to the current date. Once the invoice is closed again, restore the original date from Close Date in the Change transaction date dialog (open the Invoice No report (v1) and select Edit) so commissions stay in the correct pay period.
  • Authorization requirement: You cannot remove the authorization requirement when reopening an invoice.
  • Receipt reopen: You can reopen a receipt directly without needing to delete and re-create the invoice.
  • E-invoice restriction: For e-invoices, reopening is only available within 72 hours of invoice creation.
  • Invoice deletion restriction: Invoice deletion is restricted for 30 days from the date of creation.

Warning โ€” Gift card sale invoices: If the invoice includes a gift card sale (a gift card was sold on this invoice), reopening that invoice invalidates the gift card while the invoice is open. The guest will receive an "Invalid card number" error when they try to redeem the card at the POS, and the card disappears from the Sales โ€“ Gift Card report. The card becomes valid again once you re-close the invoice. Make corrections quickly and re-close promptly โ€” do not leave a gift card sale invoice in an open state. This is distinct from the block that prevents reopening when a gift card sale and a gift card redemption appear on the same invoice: that is a different restriction. The warning here applies even when only a gift card sale (no redemption) is on the invoice.

When an invoice cannot be reopened

The system prevents reopening an invoice in the following situations:

  • The invoice has a package sale and package redemption on the same invoice.
  • The invoice has a membership sale and membership redemption on the same invoice.
  • The invoice has a gift card sale and gift card redemption on the same invoice.
  • The invoice has been refunded.
  • The invoice has a membership for which the guest has accepted the terms and conditions.
  • The invoice has an appointment marked as redo.
  • The invoice earned loyalty points that have since been redeemed on a different invoice โ€” the system displays the message: "There were loyalty points obtained from this invoice used in other invoice, this invoice cannot be reopened."

Redemption locks: what to do when you cannot reopen

When a package, membership, or gift card redemption blocks reopening, the redemption must be cleared from the invoice before the system will allow it to reopen. To identify which redemptions are present, navigate to the guest's profile and check the Open tab โ€” it shows which package, membership, and gift card redemptions are currently applied.

If the redemptions cannot be cleared (for example, the benefits have already been consumed and cannot be reversed), reopening is not possible. In that case, operate at the payment level instead: cancel and reapply individual payment transactions on the closed invoice without reopening it, or process a refund for the specific amount that needs correction.

Important: A processed redemption on an invoice also blocks deletion of a payment recorded against that invoice. Clearing every processed redemption is a prerequisite before you can delete a payment on the invoice. If the redemptions cannot be cleared, use the payment-level correction path described above.

Loyalty points redeemed on another invoice: how to clear the block

If the system displays the message "There were loyalty points obtained from this invoice used in other invoice, this invoice cannot be reopened," the loyalty points earned from this invoice have been applied as a redemption on a different invoice. To clear the block:

  1. Navigate to the guest's profile.
  2. Select the Points tab.
  3. Locate the loyalty point redemption that was applied to the other invoice.
  4. Remove that redemption.

Once the redemption has been removed from the other invoice, return to the original invoice and attempt to reopen it again.

Refunded invoices: recovery path

An invoice that carries a processed refund can never be reopened. If you need to issue a corrected invoice after a refund has been processed, create a new invoice from the closed one rather than attempting to reopen it. This preserves the original refund record and gives the guest a clean corrected invoice.

When reopening is appropriate

Reopening is the preferred action in the following scenarios:

  • Wrong payment method recorded โ€” The guest paid by card, but cash was recorded. Reopen, cancel the cash payment, apply the card payment, and re-close.
  • Missing discount or coupon โ€” A discount was forgotten during checkout. Reopen, apply the discount, adjust the due amount, refund the difference or collect the difference, and re-close.
  • Additional items needed โ€” The guest wants to add a product purchase after the appointment invoice was closed. Reopen, add the product, collect the additional payment, and re-close.
  • Provider reassignment โ€” The wrong provider was recorded on a service. Use the Edit Invoice path (not Reopen Invoice) to reassign the provider โ€” provider reassignment is only exposed through the edit path. See Edit Invoice vs. Reopen Invoice: which to use below.
  • Price correction โ€” An incorrect price was charged. Reopen, adjust the price, handle the payment difference, and re-close.
  • Split or itemize a closed invoice โ€” A guest requests that a combined charge be broken into separate line items or separate services, or asks for a more itemized receipt. Reopen the invoice, restructure the line items, and re-close. Reopening is the only mechanism for splitting or restructuring a closed invoice's line items.

Edit Invoice vs. Reopen Invoice: which to use

Edit Invoice and Reopen Invoice are different capabilities, not two routes to the same place. Choosing the wrong one means you may not see the option you need.

Capability Edit Invoice Reopen Invoice
Reassign the provider on a service line item Yes โ€” provider reassignment is only available through the edit path No
Add or remove line items No Yes
Adjust prices or discounts No Yes
Cancel and reapply payments No Yes
Restructure or split line items No Yes

If you need to reassign a provider after an invoice is closed, use Edit Invoice. If you need to change line items, prices, discounts, or payments, use Reopen Invoice.

Closing an invoice that falls outside the financial lock period

If an invoice's date falls beyond your organization's financial lock period, the standard close workflow will be blocked. You can still close such an invoice by recording a custom non-monetary payment for the outstanding amount. This allows the invoice to reach a zero balance and close without modifying the locked financial period.

Important: Closing an invoice with a custom non-monetary payment has accounting implications. The payment will appear in your financial records as a non-cash settlement. Use this path deliberately and document the reason in the payment notes so your accounting team can reconcile it correctly. This is not a workaround to avoid the lock โ€” it is an intentional path for edge cases where a legitimate invoice must be closed outside the normal period.

Invoice line pricing and price updates

When an invoice is created, the price for each line item is captured at that moment. A later change to a service or product price in the catalog does not automatically update prices on invoices that are already open or closed.

If you need to refresh the prices on an open invoice to reflect a catalog price change, this is performed by Zenoti Support on request โ€” it is not a self-service action. To confirm that a price update has been applied to an invoice, check the invoice's audit log: a future appointment price change entry will appear in the log when the update has been made.

Audit trail

All void and reopen actions are recorded in the invoice audit log. The audit trail captures:

  • Who performed the action (user ID and name)
  • When the action occurred (timestamp)
  • What action was taken (void or reopen)
  • Why โ€” the comments entered (for voids)
  • What changed โ€” the specific payments reversed (for voids) or the modifications made after reopening

To view the audit log for an invoice, open the invoice in POS and navigate to the logs or history section. The audit log is paginated and displays entries in reverse chronological order.

The audit trail serves as a compliance and accountability tool. Managers can review void and reopen activity to identify patterns, verify legitimate corrections, and ensure that the features are not being misused.

Tips

  • Always enter meaningful void comments. The comment you enter when voiding an invoice is the only record of why the void occurred. Vague comments like "error" make it difficult to audit later. Include the reason, the original invoice reference, and any guest communication.
  • Reset the closed date after reopening. After you reopen an invoice, make changes, and re-close it, the closed date updates to today's date. If the original invoice date matters for commission pay periods, reset the Close Date after re-closing, from Edit on the Invoice No report. The Close Date cannot be earlier than the latest payment date.
  • Check reopen eligibility before starting. If an invoice has a package sale and redemption, a membership sale and redemption, a gift card sale and redemption, has been refunded, has a membership with accepted terms and conditions, has an appointment marked as redo, or earned loyalty points that were subsequently redeemed on a different invoice, the system will block the reopen. Verify these conditions first to avoid interrupting the guest interaction. Check the guest's Open tab on their profile to see which redemptions are present, and the Points tab to check whether earned loyalty points have been redeemed elsewhere.
  • Use reopen โ€” not void โ€” for corrections. If the services were delivered and payment was received, reopen the invoice to make corrections rather than voiding it. Voiding reverses all financial entries and deactivates sold items, which is appropriate only when the entire transaction should not have occurred.
  • E-invoice time window. If your organization uses e-invoicing, reopening must be completed within 72 hours of invoice creation. Plan corrections promptly to stay within this window.
  • Choose Edit Invoice for provider reassignment. If the only change needed is reassigning the provider on a service line item, use Edit Invoice rather than Reopen Invoice โ€” provider reassignment is only exposed through the edit path.

Troubleshooting

The Void Invoice option does not appear on the closed invoice.

The Void Invoice option is only visible to users with the Void permission (Security Roles > [Role] > Permissions tab > Appointments > Void). If you do not see the option, contact your manager or administrator to verify your role's permissions.

The Reopen option is grayed out or not available.

The system blocks reopening when any of the following conditions exist on the invoice: a package sale and package redemption, a membership sale and membership redemption, a gift card sale and gift card redemption, the invoice has been refunded, the invoice has a membership with accepted terms and conditions, the appointment is marked as redo, or loyalty points earned from this invoice have been redeemed on a different invoice. Review the invoice for these conditions. To identify which redemptions are present, check the guest's Open tab on their profile. To check whether earned loyalty points have been applied elsewhere, check the guest's Points tab. If none of these conditions apply and the option is still unavailable, the invoice may be within a financial lock period โ€” contact your administrator.

The system displays "There were loyalty points obtained from this invoice used in other invoice, this invoice cannot be reopened."

This message means that loyalty points earned on this invoice have been redeemed on a different invoice. To clear the block, navigate to the guest's profile, select the Points tab, locate the loyalty point redemption applied to the other invoice, and remove it. Once the redemption is removed, return to the original invoice and attempt to reopen it again.

The invoice has a redemption that is blocking reopen, and I cannot clear it.

If a package, membership, or gift card redemption cannot be cleared, reopening is not possible. Operate at the payment level instead: cancel and reapply individual payment transactions on the closed invoice without reopening it, or process a refund for the specific amount that needs correction. Note that a processed redemption also blocks deletion of a payment recorded against the invoice โ€” clearing every processed redemption is a prerequisite before a payment on the invoice can be deleted.

The invoice has been refunded and I need to issue a corrected invoice.

An invoice that carries a processed refund can never be reopened. Create a new invoice from the closed one to issue the corrected version. This preserves the original refund record and gives the guest a clean corrected invoice.

The void was processed but the card refund has not appeared on the guest's statement.

Card payment reversals are sent to your payment processor when the void is executed. The time for the refund to appear on the guest's statement depends on the processor and the guest's card issuer โ€” this typically takes several business days. The void is complete on Zenoti's side; the delay is on the payment network side.

After reopening, the closed date changed and commissions are now in the wrong pay period.

When you reopen and re-close an invoice, the closed date updates to the current date. After the invoice is closed again, reset the Close Date to the original date from Edit on the Invoice No report (v1) so commissions fall in the correct pay period. If a payment was taken during the reopen, correct that payment's date first โ€” the Close Date cannot be earlier than the latest payment date.

The system says the e-invoice cannot be reopened.

For e-invoices, reopening is restricted to within 72 hours of invoice creation. If more than 72 hours have passed, the invoice cannot be reopened. Contact your administrator to discuss alternative correction options for your compliance region.

The Reopen option is available but the invoice cannot be edited after reopening.

If the invoice is within a financial lock period, or if your user role does not have edit permissions on the relevant line items, the invoice may reopen but remain read-only for certain fields. Contact your administrator to verify the financial lock settings and your role's edit permissions.

I need to close an invoice but the date falls outside the financial lock period.

Record a custom non-monetary payment for the outstanding amount to bring the invoice balance to zero and allow it to close. Document the reason in the payment notes so your accounting team can reconcile the entry. See Closing an invoice that falls outside the financial lock period above.

Prices on an open invoice did not update after I changed the service price in the catalog.

Invoice line prices are captured when the invoice is created. Catalog price changes do not automatically update open invoices. Before requesting a refresh, check whether one has already been applied:

  1. Open the invoice and go to its audit log.
  2. Look for a "Future appointment price change" entry. If this entry is present, the price refresh has already run โ€” no further action is needed.
  3. If no such entry exists, the refresh has not yet run. Contact Zenoti Support to request a price refresh on the open invoice. Provide the invoice number and the appointment date so Support can identify the record and queue the update.

Note: Open-invoice price refresh is a support-performed operation. It is not available as a self-service action from the POS or the admin portal.

Was this article helpful?
Your feedback helps us improve our documentation.