Manage tips and commissions
Tips and commissions are key parts of the billing process that directly affect employee compensation. This article covers how to add tips during payment, how to split tips across providers, how commissions are calculated and assigned, and how to make adjustments after an invoice is closed.
On this page
- Before you begin
- Add tips during payment
- Tip entry methods
- Split tips across providers
- Tip adjustments after invoice close
- Tips payout at register closure
- Commission assignment
- Default commission rules
- Commission hierarchy
- Additional commission types
- Split commissions
- Custom commission overrides
- Commission behavior for special scenarios
- Related articles
Before you begin
Permission: Take Payment (under Appointments) β Required for adding tips during the payment process and managing commissions on invoices.
Legacy experience: In the legacy POS, tips and commissions were managed inside the full-page billing dialog. The same tip-entry methods, split-tip rules, commission hierarchy, and post-close edit behavior apply in both experiences, but the payment-screen UI and split-commission prompt described in this article apply to the current POS slider only. Contact your Zenoti representative if your center has not yet transitioned.
- To edit commissions after an invoice has been closed, the Appointment Book β Edit Commission After Invoice Closure setting must be enabled for your organization.
- Tips can be added during the payment flow before or after other payments are applied.
- Suggested tip percentages are configured at the center level (in your center's terminal settings), not at the organization level.
- Commission rules must be configured for your services and products before commissions appear on invoices. Commission configuration is done in the service, product, or employee settings -- not in POS (Point of Sale).
- To configure which item types trigger the split commission prompt, go to Essentials > POS at the organization level and select the item categories.
- Commissions can be edited from both the Appointment Book and the POS -- the front desk can define commission splits when taking payments from either entry point.
Add tips during payment
Tips are added on the payment screen as part of the checkout process. When a guest wants to leave a tip, enter the tip before or after applying the payment for the invoice balance.
To add a tip:
- Open the invoice in POS and navigate to the payment screen.
- Locate the tip entry section on the payment screen.
- Enter the tip amount using one of the entry methods described below.
- Select the payment method for the tip. The tip can be paid by the same method as the invoice balance (for example, included in the card payment) or by a different method (for example, cash tip on a card-paid invoice).
- Confirm the tip. The tip amount is recorded as a separate transaction linked to the invoice.
Tips are stored in the invoice tip details record, which tracks the tip amount, the payment type used, the employee receiving the tip, and any associated service fees.
Tip entry methods
POS supports several methods for entering tips:
Per-provider tip
When an invoice includes services from multiple providers, you can enter a specific tip amount for each provider individually. This ensures each provider receives the exact tip the guest intended.
- On the tip entry section, each provider who performed a service on the invoice is listed.
- Enter the tip amount next to each provider's name.
- Each tip is recorded separately and linked to the specific provider.
Flat amount
Enter a single flat dollar amount as the total tip. If the invoice has only one provider, the entire tip goes to that provider. If there are multiple providers, you may be prompted to allocate the tip (see Split tips below).
Percentage
Enter a percentage to calculate the tip automatically. The percentage tip is calculated on the total for services on the invoice only, excluding discounts and taxes. Products, memberships, packages, gift cards, and other non-service items are not included in the calculation. For example, if an invoice has a $100 service and a $50 product, entering a 20% tip calculates the tip as $20 (20% of $100 in services), not $30.
Note: In regions where tax-inclusive pricing is enabled (for example, GST), the tax-adjusted service price is used as the calculation base.
Split tips across providers
When a guest leaves a single tip amount for an invoice that involved multiple providers, you need to split the tip among them. POS provides a split tip interface for this:
- Enter the total tip amount on the payment screen.
- The system displays a split view listing all providers who performed services on the invoice.
- Allocate the tip amount to each provider. You can:
- Split evenly -- Distribute the tip equally among all providers.
- Split by service amount -- Distribute the tip proportionally based on the price of each provider's services.
- Custom split -- Enter a specific amount for each provider manually.
- Verify that the split amounts total to the original tip amount.
- Confirm the split. Each provider's tip is recorded separately.
For group invoices that combine multiple guests' charges, tip splits can be applied at the group level. Each provider listed across all sub-invoices in the group can receive a portion of the tip.
Tip adjustments after invoice close
In some cases, tips need to be adjusted after the invoice is closed -- for example, when a guest calls back to change their tip amount, or when a tip was entered incorrectly.
To adjust a tip after close:
- Open the closed invoice in POS.
- Navigate to the tip details section.
- Modify the tip amount for the affected provider.
- Confirm the adjustment.
Note: Tip adjustments after invoice close require the Take Payment permission and are typically restricted to managers.
Tip adjustments after close are tracked in tip reports, which show the original tip amount, the adjusted amount, the modification date, and the employee who made the change. These adjustments are also recorded in the invoice audit log.
Tips payout at register closure
Tips collected during the day are tracked per provider and included in the register closure process. When a manager closes the register at end of day:
- The system summarizes all tips collected, broken down by provider.
- Cash tips that need to be paid out from the register are listed separately.
- The manager can mark tips as paid out during the register closure workflow.
- Tip payouts reduce the expected cash in the register, which is factored into the reconciliation calculation.
Tips paid by card are typically included in the regular payment processing settlement and do not require a separate cash payout. The register closure report distinguishes between cash tips (which reduce the register balance) and card tips (which are settled through the payment processor).
Commission assignment
Commissions are the earnings that employees receive for performing services or selling products. In POS, commissions are calculated automatically based on your organization's commission rules and assigned to the appropriate employees.
Important: Commissions are calculated only on closed invoices. Invoices with partial payments, pending group payments, or other open statuses do not generate commissions until the invoice is fully closed. The one exception is Series Packages with recurring payments enabled, where commissions are calculated at the time of each recurring payment.
How commissions work in POS
When a service or product is added to an invoice, the system automatically:
- Identifies the provider assigned to the service (or the employee who sold the product).
- Looks up the applicable commission rule based on the item-level configuration, employee settings, or job-level defaults.
- Calculates the commission amount (percentage of the sale price, flat amount, or tiered structure).
- Assigns the commission to the employee on the invoice.
Commission details are visible on the invoice line item. Front desk staff can see which employee is earning the commission and the calculated amount.
Default commission rules
Commission rules are configured outside of POS, in the service, product, and employee settings. The default rules determine how commissions are calculated:
| Rule type | Description |
|---|---|
| Service commission | A percentage or flat amount earned by the provider who performs the service. Configured at the service level, service category level, or as an employee-specific override. |
| Product commission | A percentage or flat amount earned by the employee who sells the product. Configured at the product level or product category level. |
| Membership commission | A commission earned for selling a membership. Configured at the membership program level. |
| Package commission | A commission earned for selling a package. Configured at the package level. |
| Gift card commission | A commission earned for selling a gift card. Configured at the organization or center level. |
Commission hierarchy
Commission rules follow a strict hierarchy. When multiple configurations exist, the system applies the highest-priority rule:
- Item-level configuration (highest priority) -- A flat amount or percentage override configured for a specific service or product. This always takes precedence over employee and job-level settings.
- Employee-level configuration -- Commission rates configured directly on the employee's profile, or employee-level slab tiers.
- Job-level configuration (lowest priority) -- Default commission rates inherited from the employee's job designation, including job-level slab tiers.
The system applies the most specific rule that matches the employee and item combination.
Important: Item-level commission changes are not versioned. If payroll is recalculated for a past period, the system uses the latest item-level commission value, not the value that was in effect at the time. Employee and job-level slab configurations are versioned and retain historical values.
Additional commission types
Beyond sales commissions, Zenoti supports two additional commission types:
Tenure commissions -- Commission bonuses awarded based on an employee's length of service. Tenure tiers are configured at the center level, with rates increasing as employees reach longer tenure milestones. For more information, see Configure employee commissions.
Center commissions -- A flat bonus amount awarded to all employees at a center during a strong financial period. Center commission amounts are included in commission reports and payroll calculations.
Split commissions
When multiple employees contribute to a single service or sale, you can split the commission across them:
- Select the line item on the invoice.
- Open the split commission view.
- The primary provider is listed with the default 100% commission.
- Add additional employees who should share the commission.
- Enter the commission percentage or amount for each employee. The total must equal 100% of the calculated commission.
- Confirm the split.
Automatic split commission prompts
You can configure POS to automatically prompt for split commissions when certain item types are added to an invoice. To configure this:
- Go to Essentials > POS at the organization level.
- Under the "Show split commission prompt" setting, select the item categories that should trigger the prompt (Products, Memberships, Packages, Gift Cards).
The prompt appears automatically when the selected item types are added to an invoice, allowing the front desk to assign commission splits at the time of sale.
Note: The automatic commission splitting feature does not apply to services or day packages. It applies only to products, memberships, packages, gift cards, and prepaid cards. For services, commission splits must be done manually.
Custom commission overrides
You can override the default commission calculation for a specific line item on an invoice. Tips and commissions require the Take Payment permission under Appointments. To edit commissions after an invoice is closed, the Appointment Book β Edit Commission After Invoice Closure organization-level setting must be enabled.
- Select the line item on the invoice.
- Open the commission details.
- Change the commission rate (percentage) or amount.
- Confirm the override.
Custom commission overrides apply only to the current invoice. They do not change the default commission rules configured in your service or product settings. Overrides are logged in the invoice audit trail for accountability.
Commission overrides can be performed from both the Appointment Book and the POS. From the Appointment Book, select the booking, open the context menu, and access the commission details.
Common reasons for commission overrides:
- A different employee contributed to the service and deserves a commission share.
- A promotional event requires a different commission structure for the day.
- A manager needs to adjust a commission to resolve a dispute between employees.
- A training scenario where the trainee and trainer share the commission differently from the default.
Commission behavior for special scenarios
Redo appointments
If a guest is unhappy with a service and requests a redo, the original provider's commission is deducted as a redo penalty and awarded to the second provider who performs the redo service. This ensures commission is paid to the provider who ultimately delivered the satisfactory service.
Product returns
When a guest returns a product, no commission deduction is applied to the selling employee. Product returns and service redos follow different commission adjustment rules.
Reopened invoices
When a closed invoice is reopened, edited, and re-closed, the closed date changes to the current date. After it is closed again, reset the Close Date to the original date from Edit on the Invoice No report (Change transaction date dialog) so commissions are attributed to the correct pay period.
Reassign commissions and tips
In some situations, you may need to reassign a commission or tip from one provider to another β for example, when the wrong provider was credited, or when a guest requests that their tip go to a different employee.
Reassign a tip
- On the closed invoice, navigate to the tip details.
- Locate the tip entry for the provider whose tip needs to be reassigned.
- Edit the tip split to redirect the tip amount to the correct provider.
- Save the changes.
Note: Post-close tip editing requires the Appointment Book β Edit Commission After Invoice Closure setting to be enabled for your organization.
Reassign a commission
Commission reassignment is handled through the split commission feature:
- Navigate to the closed invoice from the Appointment Book (via the context menu on a paid appointment) or from POS.
- Open the commission details for the line item.
- Use the split commission interface to adjust the commission distribution β reduce the original provider's share and add the new provider with the desired commission amount.
- Save the updated commission split.
Commission splits and overrides are accessible from both the Appointment Book and the POS payment screen. For post-close edits, the Appointment Book β Edit Commission After Invoice Closure setting must be enabled.
Redo penalty (automatic reassignment)
When a guest requests a redo of a service, the system automatically handles commission reassignment: the original provider's commission is deducted as a redo penalty, and the commission is awarded to the second provider who performs the redo. This is the only scenario where commission reassignment happens automatically β all other reassignment scenarios require manual intervention.
Change the "Sale By" employee attribution
The Sale By field on an invoice records which employee is credited with making the sale for commission and reporting purposes. If your organization has enabled the Allow changing the name of the employee who made the sale setting, front desk staff can reassign the Sale By attribution after recording the transaction.
Note: The Allow changing the name of the employee who made the sale setting must be enabled at the organization level to allow Sale By changes. To enable: Organization level > click the Configuration icon > POS > Commission Gains section > Allow changing the name of the employee who made the sale > enable.
To change the Sale By employee on an invoice line item:
- Open the invoice in POS.
- Select the line item whose Sale By attribution you want to change.
- In the employee assignment field, select a different employee from the list.
- Confirm the change.
The commission for that line item is recalculated based on the newly assigned employee's commission rules.
Important: Changing the Sale By employee is different from reassigning a commission split (see the Reassign commissions section above). Sale By changes the primary employee attribution; commission splits distribute percentage shares between multiple employees.