Configure tips on terminals
Zenoti lets guests choose and pay tips directly from the payment terminal during checkout. You can display predefined tip amounts for guests to select from, configure percentage-based suggestions, or use Smart Tipping to combine both approaches.
Before you begin
Permission: The Configure Payment Settings permission is required.
- Your center must use a payment processor with terminal support (Adyen or Stripe Connect).
- The terminal must be a supported model with tip capability. For Stripe terminals, WisePOS E, WisePOS E Cloud, and Stripe Reader M2 support on-device tip prompts; Chipper 2X BT does not. See Configure payment terminals and card readers for the full device comparison.
- Terminal firmware must be updated before tips will function. A terminal restart alone is not sufficient. See the firmware update steps in Set up hardware peripherals.
Configure tip display
- At the center level, click the Configuration icon.
- Search for Payment processor onboarding and under Payments, select Payment processor onboarding.
- In the Payment Processors section, click the down-arrow chevron to expand your processor.
- Go to the Terminals tab.
- Select Display default tip.
- Choose the Default tip value type:
Amount ($)
Enter three fixed dollar amounts that guests can choose from.
Percentage (%)
Enter three percentages. The system calculates each suggested tip as a percentage of the tippable amount on the invoice. The tippable amount includes services only β products, memberships, packages, gift cards, and other non-service items are excluded. This calculation applies to both Stripe and Adyen processors.
Smart Tipping
Smart Tipping gives guests the best of both approaches by combining fixed amounts and percentages based on the invoice value.
- Set a threshold value (for example, $100).
- If the invoice tippable amount is above the threshold, suggested tips display as percentages.
- If the invoice tippable amount is below the threshold, suggested tips display as fixed dollar amounts.
- Smart Tipping is available on both Stripe and Adyen terminals.
Example: With a threshold of $100 and tip values of $10/$12/$15 and percentages of 10%/12%/15%:
| Invoice tippable amount | Tip option 1 | Tip option 2 | Tip option 3 |
|---|---|---|---|
| $50 | $10 | $12 | $15 |
| $200 | $20 | $24 | $30 |
- Click Save.
- Update your terminal firmware (see Before you begin).
Custom tip amount
On Adyen terminals, you can allow guests to enter a custom tip amount (different from the predefined options) by selecting Enable custom tip amount. When this toggle is off, guests can only choose from the three predefined values.
On Stripe terminals, custom tip entry is always enabled β guests can always enter a different amount regardless of the predefined options.
Tip configuration scope
Tip settings operate at two levels:
- Per terminal: Each terminal has a Tip support toggle that enables or disables tip prompts for that specific terminal.
- Per center-processor: The tip values (amounts, percentages, Smart Tipping threshold) are configured at the center level for each processor and shared across all tip-enabled terminals for that processor.
This means a center with multiple terminals can enable tips on checkout terminals while keeping tips disabled on product-only terminals, but all tip-enabled terminals share the same suggested amounts and percentages.
Contactless payments and tips
When collecting tips via contactless (tap) payments, the guest must tap the card twice. The first tap collects the service charges and the second tap collects the tips.
Interac card brand limitation
For the Interac card brand (commonly used in Canada), tips are not displayed on the terminal device. This is because tips collected via Interac cannot be transferred to the business.
Tips in Mirror Mode vs. terminal
Tips can be collected through two channels:
| Feature | Payment terminal | Mirror Mode (iPad) |
|---|---|---|
| Preset tip percentages | Yes | Yes |
| Custom tip amount | Yes (Adyen: toggle; Stripe: always) | Yes |
| Split tips per provider | No | Yes |
| Donation prompts | No | Yes |
For details on Mirror Mode tips, see Use Mirror Mode.