ZenotiHelp

Set up hardware peripherals

ZTZenoti Docs Team Updated September 3, 2026 5 min readGuide

Configure signature pads and QR code or barcode scanners to support guest-facing workflows in Zenoti. This article covers USB and Bluetooth peripherals used at the front desk; for card readers (Chipper 2X BT, WisePOS E, Stripe Reader M2), see Configure payment terminals and card readers.

Audience: Center managers and front-desk staff setting up or replacing peripheral hardware.


On this page


Before you begin

Permission: You need center-level configuration access to set up hardware peripherals.

  • Ensure the peripheral device is physically connected to the computer running the Zenoti front desk application.
  • For network-connected devices, ensure the device is on the same network as the Zenoti workstation.
  • For firmware updates to payment terminals, you need the vendor-provided update PIN β€” do not publish or share it outside your team.

Network and connectivity requirements

Unlike card readers, signature pads and barcode scanners do not require outbound internet connectivity on their own β€” they talk directly to the local workstation. The workstation running Zenoti still needs standard outbound HTTPS connectivity to Zenoti's servers for the data captured by the peripheral to reach the platform.

Peripheral Physical link Internet egress Port / protocol What to whitelist
Signature pad USB to workstation Workstation only HTTPS 443 to Zenoti Zenoti application URL (standard front-desk app allowlist)
Barcode / QR scanner (USB) USB to workstation (keyboard-emulation mode) Workstation only HTTPS 443 to Zenoti Zenoti application URL
Barcode / QR scanner (Bluetooth) Bluetooth to workstation Workstation only HTTPS 443 to Zenoti Zenoti application URL
Payment terminal (firmware update) Local network, USB, or cellular depending on model Terminal device HTTPS 443 to the terminal vendor's firmware servers Your payment processor's published firmware endpoints

If a peripheral connects via Bluetooth, keep it within the manufacturer's stated range of the workstation (typically 10 m / 30 ft). Interference from dense WiFi or other Bluetooth devices can drop the link; re-pair from the workstation's Bluetooth settings if discovery fails.


External-system prerequisites

Peripherals are manufacturer-owned hardware; Zenoti does not ship them and does not set driver defaults. Before you configure a peripheral:

  1. Buy or receive the device from the vendor listed for your Zenoti region (Topaz, Wacom, and compatible signature pads; Zebra, Honeywell, or similar for barcode scanners).
  2. Install the vendor's driver on the front-desk workstation. Zenoti cannot communicate with a signature pad unless its USB driver is installed and the OS recognises the device.
  3. For payment terminal firmware updates, obtain the current update PIN from your payment processor or terminal vendor. The PIN changes over time and is controlled by the vendor β€” Zenoti does not publish it.
  4. Confirm OS compatibility. Older signature pads may require an OS-level driver update when the workstation is upgraded.

For version-specific driver installation paths, use the vendor's own documentation β€” menu locations vary by vendor release.


Peripheral comparison

Feature Signature pad USB barcode / QR scanner Bluetooth barcode / QR scanner Payment terminal (firmware)
Connection USB USB (keyboard emulation) Bluetooth (paired to workstation) Local network or USB
Requires OS driver Yes Usually no Yes (pairing) N/A β€” updates ship from vendor
Where it is set up On the device and at the POS workstation On the device and at the POS workstation On the device and at the POS workstation On the terminal's own menu
Typical use Consent forms, invoices, guest acknowledgements Product lookup, check-in QR Mobile stocktake, roaming front desk Keeping tips, signature capture, EMV stacks current
Supported regions All Zenoti regions All Zenoti regions All Zenoti regions Depends on payment processor and terminal model

Signature pads

Signature pads capture guest signatures for consent forms, invoices, and other documents.

Configure a signature pad

  1. Connect the signature pad to the workstation via USB.
  2. Install the vendor-provided driver if it is not already installed.
  3. Follow the vendor's setup steps to pair the pad with the POS workstation.
  4. Capture a test signature on an invoice at that workstation to confirm the pad is detected.

Zenoti does not have a separate settings page for signature pads; the pad is used by the POS workstation it is connected to.


QR code and barcode scanners

QR code and barcode scanners speed up check-in, product lookup, and boarding-pass scanning.

Configure a scanner

  1. Connect the scanner to the workstation via USB or pair it via Bluetooth.
  2. Set the scanner to keyboard-emulation mode if the vendor offers a choice; Zenoti reads the scan as typed input.
  3. Scan a known barcode or QR code into a Zenoti lookup field to verify the scanner is recognised.

Terminal firmware updates

To update the firmware on a card payment terminal (Verifone, Miura, Ingenico, or similar depending on your processor):

  1. Open the update option on the terminal's own menu.
  2. Enter the firmware update PIN when prompted. Refer to your payment processor's terminal documentation or contact your account representative for the current PIN. Never publish the PIN in internal wikis or share it with untrusted staff.
  3. Follow the on-screen instructions to complete the firmware update.

Note: Firmware updates may require the terminal to restart. Do not process payments during a firmware update. Terminal features such as on-device tip prompts and signature capture depend on up-to-date firmware; if these features do not appear after configuration, run the firmware update first.

For Stripe-family terminals (Chipper 2X BT, WisePOS E, Stripe Reader M2), firmware is managed through the Zenoti Mobile app β€” see Configure payment terminals and card readers.


Handle peripheral failures

Failure mode User-visible symptom Affected peripheral Resolution
Device not detected Zenoti shows no device in the hardware configuration page Signature pad, USB scanner Confirm USB cable and port, reinstall the vendor driver, restart the Zenoti front-desk application.
Signature not captured on invoice Guest signs but the invoice shows no signature Signature pad Re-open the signature pad configuration page and click Test. If the test fails, reinstall the driver. If it passes, verify that Signature required is enabled for the workflow (consent form, invoice).
Bluetooth scanner drops after idle Scanner does not respond after a break Bluetooth scanner Wake the device with a key press, re-pair from the workstation's Bluetooth settings. Some scanners power down to preserve battery β€” consult the vendor documentation for the auto-off behaviour.
Firmware update fails mid-way Terminal reboots without completing update Payment terminal Do not process payments on that terminal until the update completes. Re-run the update from the terminal's own menu with the current vendor-provided PIN. If the terminal is bricked, contact your processor's hardware support.
Update PIN rejected Terminal reports the PIN is invalid Payment terminal The PIN changes over time. Contact your processor's support for the current PIN β€” do not guess.
Scanner reads barcode but no value reaches Zenoti Scanner beeps but the search field stays empty USB scanner The scanner is likely in the wrong mode. Switch to keyboard-emulation mode per the vendor documentation; focus the Zenoti search field before scanning.

Tips

  • Restart the Zenoti front-desk application after connecting a new peripheral if it is not detected automatically. Keep terminal firmware up to date to ensure compatibility with your payment processor and to access features like on-device tip prompts and signature capture.
  • Label each peripheral with its assigned register β€” mis-assigned devices are a common cause of "signature pad not found" tickets.

Was this article helpful?
Your feedback helps us improve our documentation.