ZenotiHelp

Communication β€” Zoom integration

ZTZenoti Docs Team Updated October 19, 2026 8 min readGuide

The Zoom integration automatically creates Zoom meeting links for virtual appointments and classes in Zenoti. Meeting links are delivered to guests and providers as part of the booking confirmation. This article covers day-to-day operations; for the initial setup, see Configure Zoom integration.

Audience: Front-desk staff and organization administrators who run virtual appointments and classes.


On this page


Before you begin

Permission: You need organization administrator access to manage the Zoom integration; any user with access to the appointment book can view meeting details.

  • The Zoom integration must be configured and connected. See Configure Zoom integration.
  • Virtual appointment automation must be enabled for the relevant appointment or class types.

How Zoom meetings are created

  1. A guest books a virtual appointment or class that is configured for automatic meeting creation.
  2. Zenoti creates a Zoom meeting at the configured timing (at booking, 24 hours before, or 1 hour before).
  3. The meeting link is included in:
    • The booking confirmation email or SMS sent to the guest.
    • The appointment notification sent to the service provider.
  4. The guest and provider join the meeting at the scheduled time using the link.

Integration settings inheritance: if a center has its own Zoom configuration, the center-level settings apply; otherwise the organization-level settings apply.

Provider Zoom accounts

Zenoti creates and licenses the Zoom user account for a provider automatically, the first time a virtual appointment or class is scheduled for that provider. There is no separate provisioning step and nothing to maintain:

  • No page or button in Zenoti creates, lists, or edits Zoom user accounts.
  • No Zoom control appears on the employee profile, even when Zoom is enabled for your organization.
  • Each account created this way consumes one of the licenses you recorded in Number Of License Purchased.

Enable or disable Zoom integration

Organization administrators can enable or disable the Zoom integration and set the number of Zoom licenses available for concurrent virtual meetings.

Audience: Organization administrators.

Enable Zoom integration

  1. Navigate to Configuration > Integrations > Integration settings.
  2. Search for Zoom and expand the accordion.
  3. Turn on Enable Zoom.
  4. In Number Of License Purchased, enter the number of Zoom licenses your organization has purchased.
  5. Select Save.

When you enable the integration, Zenoti activates virtual meeting creation for your organization. New virtual appointments and classes will automatically receive Zoom meeting links.

Note: The Zoom Meeting Button Lead Time (Minutes) setting controls how many minutes before an appointment the join button becomes visible to guests on the Webstore and consumer mobile app. It is an online booking setting and is not part of the Zoom accordion.

Disable Zoom integration

  1. Navigate to Configuration > Integrations > Integration settings.
  2. Search for Zoom and expand the accordion.
  3. Turn off Enable Zoom. Zenoti asks Are you sure you want to disable Zoom integration? and warns that virtual appointments are disabled with it.
  4. Confirm, then select Save.

When you disable the integration, Zenoti stops creating new Zoom meetings. Existing meeting links already sent to guests remain valid in Zoom but Zenoti will no longer manage them.

Important: Disabling the integration clears the cached Zoom settings for your organization. Re-enabling requires you to re-enter the license count and save again before virtual meeting creation resumes.

Worked example

Example: Your organization has purchased 10 Zoom licenses and hosts up to 8 concurrent virtual consultations during peak hours. You navigate to Configuration > Integrations > Integration settings, expand Zoom, set Number Of License Purchased to 10, and select Save. Zenoti now creates Zoom meetings for all virtual appointments up to the 10-license concurrent limit.


View Zoom meeting details

  1. Open the appointment in the appointment book.
  2. Select the appointment to open the context panel.
  3. The Virtual Meeting section shows the Zoom meeting ID and join link.

Manage Zoom license usage

Zenoti uses one Zoom license per concurrent virtual meeting. Monitor license consumption to ensure you have enough capacity.

  1. Navigate to Configuration > Integrations > Integration settings.
  2. Search for Zoom and expand the accordion.
  3. Review the Number Of License Purchased value you entered at setup alongside current and recent concurrent-meeting usage.
  4. If usage regularly approaches the license limit, purchase additional licenses in the Zoom Admin portal and update Number Of License Purchased in Zenoti.
  5. Select Save.

Edit or cancel a virtual appointment

Reschedule or edit

Important: Rescheduling or editing a virtual appointment replaces its Zoom meeting and issues a new join link. Before you reschedule, confirm that the Appointment Rescheduled template and your appointment reminder templates contain the [ServiceNameVideoLinkList] macro β€” otherwise the guest is never sent the replacement link and is left holding a link that no longer works.

  1. Open the appointment in Zenoti and change the date, time, or provider.
  2. Zenoti cancels the existing Zoom meeting and creates a new one for the new time, so the link sent before the change no longer works. Every edit replaces the meeting this way, and the replacement always carries a different join link.
  3. The guest receives the new link in the Appointment Rescheduled message, and in later reminders, only when those templates carry the [ServiceNameVideoLinkList] macro. A template without the macro still reaches the guest, but it arrives with no link. See Configure notification template macros.
  4. Updated confirmations are sent to the guest and provider.

Cancel

  1. Cancel the appointment in Zenoti as you normally would.
  2. Zenoti releases the Zoom meeting β€” it is removed from the Zoom account's upcoming meetings list.
  3. Canceled confirmations (if configured) are sent to the guest.

If the appointment is already past or the meeting was ended in Zoom, no further Zoom-side action is possible from Zenoti; the meeting remains in Zoom's historical record.


Handle Zoom failures

The following table lists common failure modes, their user-visible symptoms, and resolution steps.

Failure mode User-visible symptom Resolution
Zoom unreachable at creation time Booking confirmation does not include a link; appointment context panel shows no meeting details. Retry from the appointment β€” select Regenerate meeting link in the context panel. If the issue persists, check the Zoom service status.
License limit exceeded Zoom returns an error when creating concurrent meetings. Purchase additional Zoom licenses in the Zoom Admin portal and update Number Of License Purchased in Zenoti.
Guest phone or email missing Confirmation is not delivered even though the meeting was created. Update the guest profile with a valid channel, then resend the confirmation.
Integration paused by schedule No meeting links produced during the pause window. Wait for the scheduled pause to end, or cancel the pause. See Integration pause scheduling.

If a Zoom meeting fails to create, the appointment itself is not cancelled β€” the booking stands. Staff can generate a meeting link manually from the appointment context panel.


Reconciliation

For billing or capacity planning, match Zenoti's virtual-appointment volume against Zoom's usage.

The following table describes the sources, reports, match keys, and recommended cadence for reconciliation.

Source Report / view Match key Cadence
Zenoti Appointments report filtered to virtual appointment types Appointment date and time Weekly
Zoom Zoom Admin portal usage report Meeting date and time, host email Weekly

Investigate appointments that appear in Zenoti as virtual but do not have a corresponding Zoom meeting record β€” these are usually the result of a transient failure covered in Handle Zoom failures.


Tips

  • Enable waiting rooms for sensitive virtual appointments (consultations, medical visits).
  • Send the meeting link via both email and SMS to ensure the guest receives it.
  • Audit every template that a virtual guest sees β€” the booking confirmation, Appointment Rescheduled, and both appointment reminders β€” for the [ServiceNameVideoLinkList] macro. A reschedule retires the old link, so a reminder without the macro leaves the guest with no way to join.
  • Test virtual appointment creation and confirmation messages after any change to Zoom integration settings or notification templates.
  • Set the Zoom Meeting Button Lead Time (Minutes) to give guests enough time to prepare before their virtual appointment β€” a value of 10 to 15 minutes is typical for most businesses.

Troubleshooting

The following table lists common symptoms, their likely causes, and resolution steps.

Symptom Likely cause Resolution
The meeting link reaches the guest in one message but not another β€” for example, the booking confirmation carries it but the Appointment Rescheduled message or a reminder arrives without it. The template that omits the link does not contain the [ServiceNameVideoLinkList] macro. Zenoti inserts the link only where that macro is present, so the gap follows the template, not the meeting. Add [ServiceNameVideoLinkList] to every template that should carry the link β€” the booking confirmation, Appointment Rescheduled, and both appointment reminders β€” then resend the message to the affected guest. See Configure notification template macros.
A guest reports that the link they were sent no longer admits them to the meeting. The appointment was rescheduled or edited after that message went out. Zenoti cancels the existing meeting and creates a new one for the new time, which retires the earlier link. Resend the Appointment Rescheduled message, or give the guest the current link from the appointment context panel. Confirm the template carries the [ServiceNameVideoLinkList] macro so the next change delivers the replacement link automatically.
Virtual appointments are booked but no Zoom meeting link appears in confirmations. Zoom integration is disabled or was recently re-enabled without saving the license count (Number Of License Purchased). Navigate to Configuration > Integrations > Integration settings > Zoom, confirm the integration is enabled, enter the Number Of License Purchased, and select Save.
The join button does not appear for guests on the Webstore until very close to the appointment time. Zoom Meeting Button Lead Time (Minutes) is set too low. Increase the lead time value in your online booking settings and save.
After disabling and re-enabling Zoom, new meetings are not being created. Cached settings were cleared when the integration was disabled. Re-enter Number Of License Purchased in the Zoom accordion and select Save to restore the configuration.

Was this article helpful?
Your feedback helps us improve our documentation.