ZenotiHelp

Saturn 1000 device

ZTZenoti Docs Team Updated October 29, 2026 5 min readGuide

The Saturn 1000 is a payment terminal that connects to Zenoti through the V2 payment processor onboarding flow. This article explains how to register the terminal in Zenoti, complete the on-device setup, and run a test transaction to confirm the terminal is live.

Audience: Center administrators and front desk staff who manage payment terminal setup.

Before you begin

  • Your organization must have a V2-compatible payment processor configured. Navigate to Configuration > Payments > Process payments > Payment processor onboarding and confirm your processor is active.
  • You need administrator access to the Configuration > Payments section.
  • Have the following ready before starting:
    • Wi-Fi network name and password for your center
    • The terminal's serial number (printed on the device label)

Note: If you are replacing a terminal or changing payment processors, card migration may be required before decommissioning the old device. For more information, see Card Migration.

Device capabilities

The following table summarizes the Saturn 1000's capabilities.

Attribute Value
Connectivity Wi-Fi
Payment methods Chip, Contactless (NFC), PIN
Charging USB-C cable; the device can be used while charging
On-device tip prompt Yes β€” configured through the device admin menu
On-device signature collection Yes β€” configured through the device admin menu
Supported regions Verify availability with your Zenoti account representative
Multiple terminals per center Yes
Firmware update mechanism On-device admin menu
Processor Your V2-compatible payment processor, configured under Payment processor onboarding
Mirror mode Confirm availability with Zenoti Support
On-device admin PIN Not published; see the manufacturer's documentation or contact your account representative

Note: For battery life specifications, refer to the manufacturer's official documentation for the Saturn 1000.

Register the terminal in Zenoti

  1. Navigate to Configuration > Payments > Process payments > Payment processor onboarding.
  2. Scroll to the Terminals section.
  3. In the Terminal Name field, enter a descriptive name for the device β€” for example, Front Desk Saturn 1000.
  4. Click Add.

Zenoti creates the terminal record. Complete the on-device steps in the next section to pair it.

Connect to the network

Complete the following steps directly on the terminal's touchscreen.

  1. Power on: Press and hold the power button on the right side of the device for 5 seconds until the startup screen appears.
  2. Choose a language: Select your preferred language from the list displayed on screen.
  3. Connect to Wi-Fi:
    • When the Setup Wi-Fi screen appears, tap the plus sign ( + ) to add a network.
    • Tap the Wi-Fi toggle to switch Wi-Fi on.
    • Tap your network name in the list.
    • Enter the Wi-Fi password and tap Connect.
  4. Confirm store details: Review the store information displayed on screen and confirm it is correct for your center.
  5. Board the terminal: Tap Board the Terminal to complete pairing with Zenoti.

The terminal displays a confirmation message when pairing is successful.

Configure tips and signature collection

Tips and signature collection are configured through the terminal's admin menu.

Important: The admin PIN is not published in this article. To obtain the admin PIN for the Saturn 1000, refer to the manufacturer's official documentation or contact your account representative.

  1. From the terminal's idle screen, enter 9 and then press Enter.
  2. When prompted, enter the admin PIN.
  3. Tap Config.
  4. Tap Update to apply the current configuration for tips and signature prompts.

Update terminal firmware

The Saturn 1000 updates its firmware through the on-device admin menu. Open the admin menu with 9 then Enter and the admin PIN, as described in Configure tips and signature collection. After a firmware update, power the terminal off and on again before you process transactions.

Take a payment with this terminal

Before going live, run a test transaction to confirm the terminal is operating correctly.

Important: Use a real payment card for the test transaction β€” do not use the guest's card on file. After the transaction completes successfully, void or refund the charge immediately using the steps below.

  1. In Zenoti, open a test invoice at the Point of Sale.
  2. Add a low-value service or placeholder item β€” for example, a $1.00 service.
  3. Proceed to payment and select the Saturn 1000 terminal.
  4. Follow the on-screen prompts on the terminal: insert or tap the card.
  5. Verify success: Confirm that the invoice status in Zenoti changes to Paid and that a payment receipt is generated.
  6. Void the test charge: Open the closed invoice and issue a refund or void to reverse the $1.00 charge.
  7. Deactivate the test item if you created a placeholder service specifically for testing.

Tip: For processing payments at the point of sale in day-to-day operations, see Payment processing.

Tips

  • Label terminals clearly. Use center-specific names when adding multiple terminals β€” for example, Reception 1 Saturn 1000 and Reception 2 Saturn 1000 β€” so front desk staff can select the correct device at checkout.
  • Keep the USB-C cable accessible. The Saturn 1000 charges via USB-C and can be used while charging, so positioning the cable near the checkout area reduces downtime.
  • Reboot after firmware updates. After updating firmware through the admin menu, power the terminal off and on again before processing transactions to ensure changes take effect.

Troubleshooting

Symptom Likely cause Resolution
Terminal shows "Not connected" after boarding Wi-Fi credentials entered incorrectly or network unreachable Return to the Setup Wi-Fi screen, remove the saved network, and re-enter the credentials. Confirm that other devices on the same network have internet access.
USB-C charging cable does not charge the terminal Faulty cable or incompatible cable type Try another USB-C cable. If the issue persists, consult the terminals article for additional guidance.
Test transaction declined Card not enabled for card-present transactions, or incorrect processor configuration Verify the processor is active in Configuration > Payments > Process payments > Payment processor onboarding. Try a different card. If the decline continues, contact your payment processor's support team.
Admin menu does not respond to PIN entry Incorrect PIN entered Refer to the manufacturer's official documentation for the correct admin PIN. Do not attempt to guess the PIN repeatedly, as this may lock the device.
Tip or signature prompt does not appear at checkout Admin menu configuration not applied Re-enter the admin menu (9 β†’ Enter β†’ admin PIN β†’ Config β†’ Update) and confirm the update completes without error.

FAQ

Can I use the Saturn 1000 while it is charging?

Yes. The terminal charges over USB-C and can be used while it charges.

What do I do if the USB-C charging cable stops working?

Try a different USB-C cable first. If the terminal charges with the other cable, contact Zenoti Support for a replacement cable. If it still does not charge, Zenoti Support replaces the terminal. See Terminal does not charge.

Where do I find the admin PIN?

The admin PIN is not published here. Refer to the manufacturer's official documentation or contact your account representative.

Where do I buy a Saturn 1000?

Order terminals through the Zenoti Payments device ordering page. See Order, replace and return terminals.

Was this article helpful?
Your feedback helps us improve our documentation.