Verifone E355
The Verifone E355 is a compact Zenoti Payments-compatible payment terminal that supports Mirror mode, Mobile POS, and Desktop POS card capture. It accepts chip, magnetic-stripe, and NFC contactless payments including Apple Pay and Android Pay.
Note. This article covers Zenoti configuration and network setup for the E355. For device firmware updates, physical mounting, or manufacturing defaults, refer to the Verifone documentation provided with your device.
Before you begin
Permission: Add under Terminal in the Administrator section of the security role — required to register a terminal in Zenoti (Edit to change a registered terminal).
- Zenoti Payments must be configured and active for your center before registering any terminal.
- Have your E355 device powered on and connected to your network (WiFi or USB — see setup steps below).
Key details
| Detail | Value |
|---|---|
| Supported connection | WiFi (DHCP or Static IP), USB |
| Supported payment modes | Chip, contactless (NFC), magnetic stripe |
| NFC (contactless) | Yes — Apple Pay, Android Pay |
| Zenoti integration modes | Mirror mode, Mobile POS, Desktop POS card capture |
Connect via WiFi (DHCP)
DHCP is the recommended connection method for most networks.
- On the E355, enter the Engineering Menu: press the Yellow key, then 1.
- Navigate to Comms Setup > WIFI.
- Select TCP Server.
- Set the Listen Port to 16107.
- Scan for available networks and select your WiFi network. Enter the password when prompted.
- After connecting, retrieve the E355 IP address: navigate to Reports > TCPIP Report on the device. Note the IP address displayed.
- In Zenoti, navigate to Configuration > Payments > Process payments > Payment processor onboarding > expand your processor > Terminals tab.
- Add the terminal and enter the IP address from step 6.
Note on Engineering Menu access. The Engineering Menu requires a device access code that is set by your IT team or Verifone during provisioning. Do not publish device access codes. If you do not have the Engineering Menu access code, contact Verifone support or the person who provisioned the device.
Connect via Static IP (advanced)
Use a static IP if your network does not use DHCP or if IT requires fixed terminal addresses.
- Enter the Engineering Menu (see Connect via WiFi DHCP step 1).
- Navigate to Comms Setup > WIFI > TCP Server.
- Disable DHCP and enter the static IP address, subnet mask, gateway, and DNS values provided by your IT team.
- Set Listen Port to 16107.
- Proceed to Zenoti terminal registration (steps 7–8 in the DHCP section above).
Connect via USB (Desktop POS only)
The E355 can connect via USB for Desktop POS card capture.
- Connect the E355 to the desktop computer using the USB cable.
- The device is recognized automatically.
- In Zenoti Desktop POS, select Use Card Reader to initiate a payment through the USB-connected E355.
Register the terminal in Zenoti
- In Zenoti, navigate to Configuration > Payments > Process payments > Payment processor onboarding > expand your processor > Terminals tab.
- Click Add Terminal.
- Enter a Terminal Name and the terminal's IP address (from the TCPIP Report) or USB identifier.
- Save.
Accept payments
Mirror mode
- Enable Mirror mode in Zenoti Mobile.
- On the E355, the guest sees the invoice summary.
- The guest inserts, taps, or swipes their card on the E355.
- The payment result is returned to Zenoti automatically.
Mobile POS
- In Zenoti Mobile, select Use Card Reader on the payment screen.
- The E355 prompts the guest for card interaction (chip / tap / swipe).
- Confirm the payment in Zenoti Mobile after the E355 returns a result.
Desktop POS
- In the Zenoti Desktop POS invoice, select Card > Use Card Reader.
- The E355 (connected via WiFi or USB) prompts for card interaction.
- Payment result returns automatically to the invoice.
NFC (contactless) payments
The E355 accepts NFC payments including Apple Pay and Android Pay. The guest taps their device or card on the NFC reader area. No additional Zenoti configuration is required to enable NFC — it is active when the terminal is online.
Troubleshooting
Reboot the E355
A reboot clears most connection errors on this device, and it is the first thing to try when the E355 reports a connection error:
- Hold the Cancel key (the red key) until you hear a series of beeps and the device powers down.
- Press and hold the Enter key (the green key) to power the device back on.
- If you land in the Engineering Menu, press the Cancel key until you return to it, then scroll with the # key until Reboot is selected and press the green key.
The device reboots and the Welcome screen appears. Once you see the Welcome screen and the Wi-Fi icon, retry the payment.
Other issues
| Issue | Resolution |
|---|---|
| Terminal not found in Zenoti | Verify the IP address in the TCPIP Report matches the address entered in Zenoti terminal settings. |
| Cannot enter Engineering Menu | Contact Verifone support or your device provisioner for the access code. Do not attempt to guess the access code. |
| DHCP IP keeps changing | Assign a static IP (see Connect via Static IP) or configure your router to assign a fixed DHCP lease to the E355 MAC address. |
| NFC not working | Ensure firmware is up to date (refer to Verifone documentation). Confirm the Zenoti transaction type supports NFC. |