ZenotiHelp

Enable BILT, Wellhub, and Wellpass

ZTZenoti Docs Team Updated September 3, 2026 5 min readGuide

BILT, Wellhub (formerly Wellhub), and Wellpass (formerly Wellpass) are corporate-wellness marketplace integrations. For these three partners, the Zenoti-side configuration is a simple enable/disable toggle at the organization and center levels β€” Zenoti does not hold reservation, schedule, or credential state for them. All member booking, schedule publishing, and reconciliation happen on the partner's side.

Note: These three partners are not comparable to ClassPass. ClassPass is a full reservation-management integration with inbound bookings, attendance sync, and status enums; BILT, Wellhub, and Wellpass are single enable checkboxes only. For ClassPass, see Configure ClassPass integration.


On this page


Before you begin

Permission: You need organization administrator access to enable or disable these integrations at the organization level; center administrator access to enable them at the center level.

  • Your organization must have a signed partner agreement with each platform you intend to enable (BILT, Wellhub, or Wellpass).
  • The partner must have activated your organization on its side before you enable the Zenoti toggle. The Zenoti toggle does not create the partner relationship.
  • Your Zenoti class schedule for any enabled center must be production-ready β€” partners pull schedule information once activated.

External-system prerequisites (partner side)

Each partner has its own provisioning flow. Complete these before enabling the Zenoti toggle.

BILT

  1. Contact your BILT partner representative and sign the BILT partner agreement.
  2. Ask BILT to activate your account on its platform.
  3. BILT does not issue per-venue credentials that you paste into Zenoti β€” activation is a business-tier step only.

Wellhub

  1. Contact your Wellhub account manager and sign the partner agreement.
  2. Confirm with Wellhub which of your centers will be listed on the Wellhub marketplace.
  3. Wellhub does not issue per-venue credentials that you paste into Zenoti.

Wellpass

  1. Contact your Wellpass account manager and sign the partner agreement.
  2. Confirm activation on Wellpass's side.
  3. Wellpass does not issue per-venue credentials that you paste into Zenoti.

If the partner is not yet activated on its side, the Zenoti toggle has no effect β€” members still cannot book.


Network requirements

All three partners are hosted SaaS marketplaces.

Direction Purpose Protocol / port What to whitelist
Zenoti -> Partner Schedule publishing (handled by Zenoti once the toggle is on). HTTPS / 443 None for you β€” Zenoti manages outbound connectivity.
Partner -> Zenoti None for these three partners (no inbound reservation flow). n/a No action.

Enable at the organization level

  1. Navigate to Configuration > Integrations > Integration settings.
  2. Expand the partner's accordion: BILT, Wellhub, or Wellpass. Each accordion has one Configuration panel.
  3. Select the checkbox: Enable BILT, Enable Wellhub, or Enable Wellpass.
  4. Select Save inside the panel.

The organization checkbox only advertises availability. Nothing is published to the partner until at least one center is enabled as well.


Enable at the center level

  1. Select the center in the center selector, then navigate to Configuration > Integrations > Integration Settings.
  2. Expand the partner's accordion (BILT, Wellhub, or Wellpass).
  3. Select the partner's enable checkbox for this center.
  4. Select Save at the bottom of the page.

Repeat for each center you want to list.


How the two checkboxes interact

Each partner has an organization checkbox and a center checkbox. Both must be selected for the integration to be active at a given center. Clearing either takes the center offline.

Organization Center Result at this center
Clear Clear Not active. Partner cannot see this center.
Clear Selected Not active. The organization checkbox overrides; the partner still cannot see this center.
Selected Clear Not active. The center has opted out even though the organization is enabled. Use this when a single center is temporarily offline.
Selected Selected Active. Partner schedule publishing is live for this center.

The same table applies independently to BILT, Wellhub, and Wellpass. Turning one partner on does not affect the others.


Disable an integration

  1. Clear the partner's enable checkbox at either the organization or the center level.
  2. Select Save.

The integration stops accepting new reservations from that partner immediately. Existing guest reservations on the partner platform are handled by the partner under its own policy; Zenoti does not cancel or refund them.


Verify

  1. After enabling at both levels, ask your partner rep (BILT, Wellhub, or Wellpass) to confirm the center is visible on their marketplace. Propagation is partner-side and typically takes up to 24 hours.
  2. Confirm the class schedule renders in the partner app with accurate instructor and class names.
  3. If the listing looks wrong, adjust the Zenoti schedule (names, capacity, instructor) rather than the partner listing.

What to configure next

Optional:

If you also use ClassPass, configure that separately β€” Configure ClassPass integration.


Tips

  • Do not toggle off a live partner without coordinating first. Active corporate-wellness members may have bookings or credits on their side that a sudden disable will frustrate.
  • Treat these three as publishers only: Zenoti publishes your schedule to them; they do not push reservations back. Booking and attendance on the partner app are the partner's responsibility.
  • If you need richer reservation management (status transitions, attendance sync, cancellation fees), ClassPass is the integration to use, not these three.

Troubleshooting

Symptom Likely cause Resolution
Partner representative reports your center is not visible 24 hours after enabling. Center checkbox clear, or partner has not fully activated the account on its side. Verify both Zenoti checkboxes are selected. If on, ask the partner rep to re-verify activation.
Partner representative reports outdated class names or times. Zenoti schedule changed but the partner has cached the old schedule. Allow the partner's caching window (a few hours). If persistent, ask the partner to refresh.
Partner representative asks for API credentials. Misunderstanding β€” BILT, Wellhub, and Wellpass do not require per-venue API credentials from Zenoti. Authentication to each partner uses credentials Zenoti holds centrally under the partner agreement. No customer-pasted keys are required.
Center suddenly dropped off the marketplace. Someone cleared the organization or center checkbox, or the partner suspended the account. Check both checkboxes in Zenoti. If both are selected, contact the partner.

Was this article helpful?
Your feedback helps us improve our documentation.