ZenotiHelp

Verifone V400m

ZTZenoti Docs Team Updated September 4, 2026 1 min readGuide

The Verifone V400m is an Adyen-connected Zenoti Payments terminal. This article covers WiFi setup and Zenoti terminal registration for the V400m.

Note. This article covers Zenoti configuration steps. For detailed hardware specifications, firmware updates, or manufacturing defaults, refer to the Verifone documentation provided with your device.

Before you begin

Permission: Add under Terminal in the Administrator section of the security role — required to register a terminal in Zenoti (Edit to change a registered terminal).

  • Zenoti Payments with Adyen must be configured and active for your center.
  • The V400m must be powered on.

Key details

Detail Value
Processor Adyen
Connection WiFi
Key mapping Green circle = Enter / Confirm; Red X = Cancel / Back

Connect to WiFi

  1. On the V400m, tap Configure Network.
  2. Select Wi-Fi.
  3. Tap Add Network.
  4. Select your WiFi network from the list, enter the password, and confirm with the green circle (Enter) key.
  5. The V400m connects and displays the network status.

Register in Zenoti

  1. Navigate to Configuration > Payments > Process payments > Payment processor onboarding > expand Adyen > Terminals tab.
  2. Click Add Terminal.
  3. Enter a Terminal Name and the V400m's network details.
  4. Save.
  5. Board the terminal: on the device tap Board the Terminal, confirm the displayed center address, and wait for the automatic reboot.
Was this article helpful?
Your feedback helps us improve our documentation.