Data-Readiness Banner for Prediction Panes
Before AI Inventory generates replenishment recommendations for a center, it runs a readiness check to determine whether predictions are ready to display. If predictions are not yet available, AI Inventory replaces the prediction panes with a readiness banner that tells you exactly what is happening and what to expect next.
Audience: Inventory managers and center owners who monitor AI Inventory for replenishment recommendations.
Before you begin
- Your center must have AI Inventory Manager activated. If you have not yet completed setup, see Set up AI Inventory Manager.
- You need Add or Edit permission on the Inventory security object to access AI Inventory Manager screens.
- Readiness banners are center-specific. Switch to the center you want to check before reviewing prediction panes.
Steps
Understand the four readiness states
When you open a prediction pane for a center, AI Inventory performs a readiness probe. Depending on the result, you will see one of the following states:
The following table describes each banner state, what it means, and what you should do.
| Banner state | What it means | What to do |
|---|---|---|
| Analyzing your data | The AI model is currently training or scoring predictions for this center. | Wait for the nightly refresh to complete. No action is required. |
| Need a bit more data | This center does not yet have enough transaction history for the system to generate reliable recommendations. | Continue normal operations. Recommendations become available as transaction history accumulates. |
| Recommendations temporarily unavailable | A service error prevented predictions from loading. | Wait for the system to recover. The banner retries automatically when the service is reachable again. |
| Normal rendering (no banner) | Predictions are ready and displayed in full. | Proceed with reviewing recommendations in the action grid. |
Note: The message text displayed inside the banner comes directly from the service. If the service supplies a specific message, that message appears verbatim. If no message is supplied, the banner shows a built-in fallback message appropriate to the state shown in the table above.
Identify the banner on screen
- Navigate to Inventory Dashboard and select the center you want to review.
- Select the Inventory overview tab.
- Look at the prediction pane area β the section showing Predicted daily usage, Reorder level, Target stock, and Suggested order quantity.
- If a readiness banner is shown, the prediction pane beneath it is still present but appears visually muted and cannot be interacted with. The pane updates automatically as soon as predictions become available β you do not need to refresh the page.
Important: While a readiness banner is displayed, the figures shown in the prediction pane below it are not current predictions. Do not use them to make ordering decisions. Wait until normal rendering resumes before acting on recommendations.
Interpret "Analyzing your data"
The Analyzing your data banner appears in two situations:
- The AI model is actively training or scoring predictions for your center (the normal, expected state during model processing).
- The readiness probe could not reach the service due to a network or service error. In this case, the system defaults to displaying the Analyzing your data banner rather than showing incomplete or zero-filled prediction rows.
In both cases, the correct action is to wait. The system retries automatically when the service is reachable. You do not need to reload the page or take any action.
Note: The system distinguishes internally between a genuine "analyzing" status and a probe failure so that it can retry at the right time. From your perspective, both look identical β the Analyzing your data banner is displayed in either case.
Interpret "Need a bit more data"
The Need a bit more data banner appears when this center has insufficient transaction history for the AI model to generate reliable recommendations.
- For retail products, the model relies on point-of-sale sales history.
- For consumable products, the model relies on employee checkouts and service consumption history.
As your center accumulates more transactions, the system will move through lower confidence tiers (T4 β Very Low, T3 β Low, T2 β Medium) before reaching T1 β High. There is no manual action required to trigger this progression β it happens automatically at each nightly refresh as more data is available.
Tip: To understand confidence tiers and what they mean for forecast reliability, see Check confidence scores and tiers.
Interpret "Recommendations temporarily unavailable"
The Recommendations temporarily unavailable banner indicates that the service encountered an error while generating or retrieving predictions.
- This state is temporary. The system recovers automatically.
- No data is lost. The prediction pane's internal state is preserved while the banner is displayed.
- When the service becomes reachable again, the prediction pane updates immediately without requiring a page reload.
If this banner persists across multiple nightly refresh cycles (that is, it is still showing the following business day), contact your Zenoti administrator to investigate the service status.
Resume normal use after predictions become available
When predictions are ready, the readiness banner disappears and the prediction pane renders normally. You can then:
- Review Predicted daily usage, Reorder level, Target stock, and Suggested order quantity for each product.
- Filter the action grid by Stock status (Critical, Low, Normal) or Confidence tier.
- Filter the action grid by Product type using the Retail, Consumable, or Both label β products tracked as both retail and consumable appear under the Both type in the Type column and in the product-type filter.
- Proceed with creating a bulk purchase order.
Tip: Predictions are refreshed each night. If you check AI Inventory early in the morning and a banner is still showing, wait until the nightly refresh completes before acting.
Tips
- Do not bookmark a prediction pane while a banner is displayed. The figures underneath a readiness banner reflect a preserved internal state, not current predictions. Always confirm that normal rendering is active before using recommendation values for ordering.
- Check the banner message text carefully. The service may supply a specific explanatory message that gives you more detail about the current state than the banner heading alone. Read the full message before concluding that action is needed.
- Confidence tiers tell you how reliable predictions are once they appear. After the readiness banner clears, check the Confidence column in the action grid. Products showing T3 β Low or T4 β Very Low have lower forecast stability β consider reviewing their inputs before committing to a purchase order. See Check confidence scores and tiers for guidance.
- Settings changes do not trigger an immediate re-prediction. If you update reorder coverage, safety days, or lead time while a banner is showing, those changes take effect at the next nightly refresh β not instantly.
- The readiness banner is per center. If you manage multiple centers, each center has its own readiness state. Switching to a different center may show normal rendering even if the current center is still analyzing.
- The Both product type has its own filter option. When filtering the action grid by Product type, select Both to see only products tracked as both retail and consumable. These products do not appear under Retail or Consumable alone.
Troubleshooting
| Problem | Possible cause | Resolution |
|---|---|---|
| The Analyzing your data banner has been showing for more than two business days. | The nightly model job may have failed silently, or the service may be unreachable. | Contact your Zenoti administrator. The service should complete a scoring run within one nightly cycle under normal conditions. |
| The Need a bit more data banner persists after several weeks of operation. | The center may have very low transaction volume, or consumable checkouts and service completions may not be recorded consistently. | Ensure that staff record employee checkouts and that service completions update consumption correctly. See Check retail vs. consumable demand for demand-counting rules. |
| The Recommendations temporarily unavailable banner appears repeatedly across consecutive days. | A persistent service error may be preventing prediction retrieval. | Contact your Zenoti administrator. This banner should resolve automatically once the service is healthy; repeated occurrences indicate a deeper issue. |
| The prediction pane figures are visible but appear grayed out and cannot be clicked. | A readiness banner is active. The pane is intentionally muted while predictions are not yet ready. | Wait for the banner to clear. Do not attempt to act on figures shown while the pane is muted. |
| No banner is showing but the prediction columns display dashes (β). | The product may have zero daily usage (for example, a slow-moving SKU), which results in no reorder alert and no predicted quantity. | This is expected behavior for products with no recent consumption. See Check stock status and risk levels for how slow-moving products are classified. |
| A product does not appear under the Retail or Consumable filter but is present in the grid. | The product is tracked as both retail and consumable, so it appears under the Both type only. | Select Both in the Product type filter to include these products in your view. |