Set up AI Inventory Manager
The 4-step setup wizard walks you through activating AI Inventory Manager for your center. Completing the wizard takes about five minutes and immediately populates the dashboard with at-risk products based on your last 90 days of transaction history.
Note: For conceptual background on how AI Inventory Manager works, see AI Inventory Manager overview.
Availability: AI Inventory Manager is a beta feature. It must be enabled for your organization before the wizard is accessible. If you do not see AI Inventory in the left navigation, contact your Zenoti representative.
Audience: Center managers and inventory owners who are activating AI Inventory Manager for the first time.
Before you begin
Permission: Add or Edit (on the Inventory security object) β required to complete the AI Inventory Manager setup wizard.
- AI Inventory Manager must be enabled for your organization. If the module is not accessible, see Licensing & activation.
- You must have Add or Edit permission on the Inventory security object to complete the wizard.
- The wizard is presented automatically on first access. If your center has already been activated, the wizard does not appear β navigate directly to the dashboard instead.
Steps
Step 1: Review the Welcome screen
- In the left navigation, go to Inventory β AI Inventory.
- If this is your center's first access, the system automatically displays the Welcome screen.
- Review the three feature capabilities highlighted on the Welcome screen:
- AI alerts before you run out β The system watches your daily usage and warns you before stock reaches zero, not after.
- AI-powered order suggestions β Recommendations are based on your sales rate, vendor delivery time, and how much stock you want on hand.
- AI reads your appointment book β For injectables and consumables, the system reads booked appointments and anticipates demand before it arrives. For example, if your center has 30 Botox appointments scheduled for next week, the system factors that forward demand into its recommendations.
- Read the How it works β a 30-second example section, which walks through an end-to-end example of the recommendation flow β from a product's daily usage being measured, through the reorder calculation, to a suggested order appearing on the dashboard.
- When you are ready to continue, select Continue to advance to Step 2.
Tip: The Welcome screen is informational only. You do not need to configure anything here. Take a moment to share the "How it works β a 30-second example" with your team so they understand what the AI recommendations represent before you activate.
Step 2: Set reorder coverage
Reorder coverage is the number of days of stock you want on hand after each replenishment order β in other words, how long one order should last. It is a target replenishment horizon, not a minimum-stock floor.
On the Reorder coverage screen, review the preset options:
Option Value Preset 7 days Preset 14 days Preset 30 days (default) Preset 60 days Preset 90 days Custom Enter any value Select a Preset value, or select Custom and enter the number of days that matches your ordering cadence.
- Reorder coverage β The number of days of stock desired on hand after reordering. The default is 30 days. A higher value means larger, less frequent orders; a lower value means smaller, more frequent orders.
When you are satisfied with your selection, select Continue to advance to Step 3.
Important: Reorder coverage is a target replenishment horizon. It tells the system how much stock to aim for after an order arrives β it does not set a minimum stock floor or a safety buffer. Safety days (configured in Step 3) serve that purpose.
Note: The value you set here becomes the default for your center. You can override it per product or per category later in Settings. Changes to this setting take effect at the next nightly refresh, not immediately.
Step 3: Set lead time and safety days
Lead time is the number of days between placing a purchase order and receiving the stock. Safety days add an optional buffer on top of the lead time to protect against late deliveries or unexpected demand spikes.
- On the Lead time & safety screen, review the system-learned lead time value. This value is derived automatically from your center's purchase order history and is the recommended starting point.
- To accept the system-learned value, leave the Manually override lead time toggle off.
- To set a fixed lead time instead:
- Turn on the Manually override lead time toggle.
- Enter a value in the Lead time in days field.
- Review the Safety Days (Optional) field:
- Safety days β An optional buffer added to the lead time when calculating your reorder level. The default is 2 days. Set this to 0 if you do not want any buffer applied.
- When you are satisfied with both values, select Continue to advance to Step 4.
Tip: If your center has limited purchase order history, the system-learned lead time may not yet be reliable. In that case, use Manually override lead time to enter a value you know from experience with your vendors.
Note: Lead time and safety days work together in the reorder calculation. A longer lead time or more safety days raises your reorder level, which means the system flags products for reorder earlier. See Calculate reorder levels and suggested quantities for the full calculation.
Step 4: Review and activate
The Review & Activate screen summarizes all three settings you have configured. Review each value before activating.
- On the Review & Activate screen, confirm the following:
- Reorder coverage β The number of days of stock desired after reordering.
- Lead time mode β Whether the system is using the system-learned lead time or a manually overridden fixed value, and the number of days.
- Safety days β The buffer days applied on top of lead time.
- If any value needs adjustment, select the edit control next to that setting to return to the relevant step and update it.
- When all three values are correct, select Activate AI.
After you select Activate AI, the system:
- Analyzes your center's last 90 days of transaction history.
- Immediately populates the dashboard with at-risk products.
- Enrolls your center in a nightly recommendation refresh (runs every night going forward).
- Enrolls your center in a weekly email digest (default send day: Monday).
Important: Activation is not reversible from the wizard. Once you select Activate AI, the system begins processing your transaction history and the dashboard populates. If you need to adjust settings after activation, use the Settings screens β see Configure AI Inventory Manager settings.
Worked example
Example β A medspa activating for the first time:
The inventory owner at a medspa navigates to Inventory β AI Inventory for the first time. The Welcome screen appears. She reads the "How it works β a 30-second example," which shows how the system measures that a filler product sells at 5 units per day, applies a 7-day lead time and 2-day safety buffer, and calculates a reorder level of 45 units β flagging the product as Critical when stock drops below that threshold.
On Step 2, she selects 30 days as her reorder coverage β matching her monthly ordering cadence with her primary distributor.
On Step 3, the system-learned lead time shows 7 days, which matches her experience. She leaves Manually override lead time off and keeps Safety Days (Optional) at the default of 2.
On Step 4, she reviews the summary: Reorder coverage 30 days, Lead time mode system-learned (7 days), Safety days 2. She selects Activate AI. Within moments, the dashboard populates with 12 at-risk products, and she receives a confirmation that the weekly Monday digest and nightly refresh are now active for her center.
Tips
- Start with the defaults. The preset of 30 days for reorder coverage and 2 days for safety days are sensible starting points for most centers. You can refine them after you have seen a few weeks of recommendations.
- Use the system-learned lead time when possible. If your center has at least a few months of purchase order history, the system-learned value is more accurate than a manually entered estimate. Switch to a manual override only if you know the system value is wrong β for example, if you recently changed vendors.
- Activate during a low-traffic period. The initial analysis runs immediately after you select Activate AI and populates the dashboard within minutes. There is no downtime, but activating when the team is not mid-shift gives you time to review the first set of recommendations without interruption.
- Coordinate with your team before activating. The weekly email digest is enrolled automatically on activation. Let your team know to expect the first digest on the following Monday.
- Settings changes take effect at the next nightly refresh. If you update reorder coverage, lead time, or safety days after activation, the dashboard will not reflect the change until the next nightly run β not immediately on save.
Troubleshooting
- The AI Inventory nav item does not appear in the left navigation. AI Inventory Manager must be enabled for your organization before the module is accessible. Contact your Zenoti representative to confirm the module is active for your account. See Licensing & activation.
- The setup wizard does not appear when I navigate to AI Inventory. The wizard only appears on first access for a center that has not yet been activated. If your center was previously activated by another user, the dashboard appears instead of the wizard. Check with your team to confirm whether activation has already been completed.
- The system-learned lead time value looks incorrect. The system-learned lead time is derived from your center's purchase order history. If your center has limited history, or if you recently changed vendors, the value may not reflect current reality. Use the Manually override lead time toggle on Step 3 to enter a value you know to be accurate.
- I selected Activate AI but the dashboard shows no products. The initial analysis covers the last 90 days of transaction history. If your center has fewer than 90 days of data, or if all tracked products currently have sufficient stock, the dashboard may show few or no at-risk products immediately after activation. This is expected behavior β the nightly refresh will continue to evaluate stock levels going forward.
- I need to change my reorder coverage or lead time after activation. The wizard cannot be re-run after activation. Update your settings from the Settings screens. See Configure AI Inventory Manager settings for the full configuration hierarchy. Note that changes take effect at the next nightly refresh.