ZenotiHelp

Progressive grid column loading with pending-cell placeholders

ZTZenoti Docs Team Updated October 12, 2026 6 min readGuide

The AI Inventory Manager action grid loads its data in multiple phases, so columns whose data has not yet arrived show an animated pulsing placeholder bar instead of a blank, a zero, or a dash. This article explains what the placeholders mean, how to read the grid while data is still loading, and how to tell the difference between a value that has not yet arrived and a value that genuinely does not exist.

Audience: Center managers and inventory staff who review and act on AI Inventory Manager recommendations.

Before you begin

  • AI Inventory Manager must be activated for your organization. If you do not see the AI Inventory section in your navigation, contact your Zenoti administrator.
  • You need Add or Edit permission on the Inventory security object to access the action grid.
  • Familiarity with the action grid layout is helpful. See Use the action grid and filters for an orientation.

Steps

Open the action grid

  1. Navigate to AI Inventory in the left-hand navigation.
  2. Select Inventory overview.
  3. Select the center you want to review from the center selector at the top of the screen.

The action grid opens. Depending on your network speed and the number of SKUs in the center, you may see some columns populate immediately while others still show pulsing placeholder bars.

Understand which columns load in which phase

The grid fetches data in two main phases. The table below describes what is available when.

Phase Columns available Columns still loading
Phase 1 β€” Identity and stock data Product name, Category, Stock / Reorder level, On-hand stock, Incoming stock, Status Daily usage, Days of stock left, Suggested qty, Vendor price, Value to order, Aged units, Aged value, Oldest layer, Age profile
Phase 2 β€” Planning, pricing, and aging data All columns above now populate β€”

Note: The exact time between phases varies. On most connections, Phase 2 data arrives within a few seconds of Phase 1. For centers with large SKU counts, Phase 2 may take slightly longer.

Read the pulsing placeholder bars

While Phase 2 data is loading, cells in planning, pricing, and aging columns display an animated pulsing bar β€” a horizontally sweeping grey shimmer. This bar means the data is in transit from the server and the grid is waiting to render it.

Do not interpret a pulsing placeholder as:

  • Zero units on hand
  • Zero suggested order quantity
  • A missing or discontinued product

Important: Do not act on any Phase 1 columns β€” such as Stock / Reorder level or Status β€” to make ordering decisions until all placeholder bars have resolved. The Suggested qty column, which drives your purchase order quantities, is a Phase 2 column and will show a placeholder bar until its data arrives.

Wait for placeholders to resolve

Once Phase 2 data settles, each pulsing placeholder bar is replaced by one of two things:

  • A real value β€” for example, a number in Daily usage, a quantity in Suggested qty, or a cost in Vendor price.
  • An em-dash (β€”) β€” the column's standard empty-value display, indicating that the backend has confirmed no value exists for that cell. For example, a product with no aging inventory shows β€” in Aged units and Aged value rather than 0.

The distinction matters: a pulsing bar means the data has not yet arrived; an em-dash means the data has arrived and the answer is genuinely absent.

Tip: If pulsing bars remain visible for more than 30 seconds, try refreshing the page. If placeholder bars persist after a refresh, see Troubleshooting below.

Proceed with your review once all placeholders resolve

After all placeholder bars have been replaced by either real values or em-dashes, the grid reflects the full picture for the current nightly refresh cycle. You can then:

  • Review Status badges (Critical, Low, Normal) alongside Days of stock left and Suggested qty to prioritize replenishment.
  • Use filters such as Stock status, Confidence, Movement, or Aged to narrow the grid.
  • Select products and proceed to Create a bulk purchase order with a vendor strategy.

Tips

  • Filter after the grid is fully loaded. Applying a filter while Phase 2 placeholders are still present may produce counts that appear lower than expected, because filtering happens against the data currently rendered β€” not the data still in transit.
  • Check the Status column first, then Suggested qty. Status (Critical, Low, Normal) is a Phase 1 column and resolves quickly. Use it as an early signal of which products need attention, then confirm the quantity to order once Suggested qty resolves in Phase 2.
  • An em-dash is not an error. Products with no aging inventory will show β€” in Aged units, Aged value, Oldest layer, and Age profile after Phase 2 resolves. This is correct behavior, not a loading failure.
  • Pulsing bars do not block export. If you export the grid to Excel or CSV before Phase 2 resolves, exported cells for Phase 2 columns will be empty in the file. Wait for all placeholders to resolve before exporting to ensure the file contains complete data.
  • Slow-moving products with zero daily usage will show a Suggested qty of β€” after Phase 2, not a pulsing bar, because the backend has confirmed there is no suggestion to make for a product flagged as slow-moving.

Troubleshooting

Symptom Likely cause Resolution
Pulsing placeholder bars remain visible for more than 30 seconds A transient network or server delay has stalled Phase 2 data retrieval. Refresh the page. If the issue recurs, wait a few minutes and try again. If it persists across multiple sessions, contact your Zenoti administrator.
All Phase 2 columns show β€” immediately after the grid loads, with no pulsing phase visible The center has no Phase 2 data available for the current nightly refresh cycle β€” for example, a newly onboarded center that has not yet completed its first ML forecast run. Confirm with your administrator that the onboarding wizard has been completed and that at least one nightly refresh has run. See Set up AI Inventory Manager.
Suggested qty shows a value but Vendor price shows β€” The product has no vendor linked in the product master for this center. Assign a vendor to the product in the inventory product master, then wait for the next nightly refresh for the price to populate. See Configure AI Inventory Manager settings.

Note: Settings changes β€” including vendor assignments β€” take effect at the next nightly refresh, not immediately after saving.

Worked example

Center: Downtown Medspa β€” 312 active SKUs.

After opening Inventory overview and selecting Downtown Medspa, the grid loads Phase 1 in approximately two seconds. The Product name, Category, On-hand stock, Stock / Reorder level, and Status columns are populated. The Daily usage, Suggested qty, Vendor price, Aged units, and Aged value columns all show pulsing placeholder bars.

Three seconds later, Phase 2 resolves:

  • Hyaluronic Acid Serum (50 ml): Status = Critical, Daily usage = 3.2 units/day, Days of stock left = 4, Suggested qty = 48, Vendor price = $12.50, Aged units = β€”
  • Lavender Body Scrub: Status = Normal, Daily usage = 0.4 units/day, Days of stock left = 74, Suggested qty = β€”, Aged units = 6, Aged value = $54.00
  • SPF 50 Mineral Sunscreen: Status = Low, Daily usage = 1.1 units/day, Days of stock left = 11, Suggested qty = 12, Vendor price = $8.75, Aged units = β€”

The Lavender Body Scrub shows β€” in Suggested qty because its days of stock left exceeds the reorder level β€” the backend has confirmed no order suggestion, not that data is still loading. The Hyaluronic Acid Serum shows β€” in Aged units because it has no aging inventory stock β€” again a confirmed empty value, not a loading artifact.

Was this article helpful?
Your feedback helps us improve our documentation.