Check pack size rounding
When AI Inventory Manager calculates how much of a product to order, the raw suggested quantity is based on deterministic reorder math β it is rarely a round number. This article explains how the system rounds that raw figure up to the vendor's pack size, and how to review both the pre-rounding and post-rounding values before sending a purchase order.
Note: AI Inventory Manager rounds to the vendor's pack size only. It does not apply a separate vendor minimum order quantity (MOQ) β a different setting that sets a floor on total units per order line, independent of pack size. If your vendor has an MOQ, verify manually that the rounded quantity meets it before sending the purchase order.
Audience: Inventory coordinators and purchasing managers who review AI-recommended orders and create bulk purchase orders.
Before you begin
Permission: Add or Edit (on the Inventory security object) β required to create and send purchase orders.
- AI Inventory Manager must be activated for your organization. If the module is not visible, contact your Zenoti account representative.
Availability: AI Inventory Manager is a Beta feature. Access requires CSM enablement for your organization.
- Your center must have completed the onboarding setup wizard. See Set up AI Inventory Manager.
- Pack sizes must be configured on each vendor's product record in the inventory module before AI Inventory Manager can apply them. If a pack size is missing, the system treats the pack size as 1 (individual units).
- You need Add or Edit access on the Inventory security object to create and send purchase orders.
Steps
Understand how pack-size rounding works
The suggested order quantity displayed in the action grid is the result of two layers of calculation:
- Raw suggested quantity β The deterministic reorder math computes how many units are needed to bring on-hand stock up to the target stock level, accounting for predicted daily usage, lead time, safety days, and reorder coverage. This number is not rounded.
- Pack-size-rounded quantity β The system rounds the raw quantity up to the nearest multiple of the vendor's pack size. The system never rounds down, because rounding down would result in receiving fewer units than the target stock calculation requires.
For example, if the raw suggested quantity is 14 units and the vendor's pack size is 6, the raw figure falls between 12 units (2 packs) and 18 units (3 packs). The system rounds up to 18 units β never down to 12, which would leave you short of target. This is the gap customers most often ask about: the quantity you are asked to order (18) is higher than the quantity the math produced (14) purely because the vendor sells in packs of 6.
The action grid column Suggested qty always shows the pack-size-rounded final quantity. To see both values side by side, open the explainability panel for any line item β the Pack size adjustment row in the Calculations part shows the raw quantity and the rounded quantity together.
Note: The Calculations part of the explainability panel is deterministic arithmetic, not AI-computed output. Only the predicted daily usage and confidence tier come from the ML model. Everything else β including pack-size rounding β is transparent, auditable math applied on top of that forecast.
Review pack-size values in the action grid
- Navigate to AI Inventory in the main navigation.
- Select your center from the center selector if it is not already active.
- On the Inventory overview tab, review the action grid. The Suggested qty column shows the final rounded quantity for each line.
- To inspect the raw and rounded values for a specific product, click the Why this? icon on that row to open the explainability panel.
- In the explainability panel, select the Calculations part.
- Locate the Pack size adjustment row. It displays:
- The raw (pre-rounding) suggested quantity
- The pack-size-rounded final quantity
- The vendor's pack size used for the calculation
Handle products sourced from multiple vendors β pack-size fields by strategy
When the same product is available from more than one vendor, each vendor may have a different pack size. The system applies each vendor's pack size independently β it does not average or blend pack sizes across vendors.
The vendor used for rounding depends on the vendor strategy selected when you create the bulk purchase order:
| Strategy | Vendor selected for rounding |
|---|---|
| Last ordered vendor | The vendor used on the most recent purchase order for that product |
| Least cost | The vendor with the lowest unit price |
| Most frequently ordered | The vendor with the most purchase orders for that product |
| Least lead time | The vendor with the shortest average delivery time |
If you change the vendor strategy, the system recalculates the suggested quantity using the newly selected vendor's pack size.
Create a bulk purchase order with rounded quantities
In the action grid, select the products you want to order. Use Select all to include all recommended items, or filter first and then select a subset.
Open the bulk purchase order flow by clicking the purchase order creation button.
The system splits your selection into one purchase order per vendor. Quantities are pre-filled using the pack-size-rounded values for each vendor's assigned products.
Review the vendor strategy shown at the top of the bulk PO flow. The default is Last ordered vendor. To change it, select one of the following from the strategy selector:
- Last ordered vendor
- Least cost
- Most frequently ordered
- Least lead time
When you change the strategy, the system recalculates vendor assignments and pricing per line, applying the newly selected vendor's pack size to each affected product.
Review the Quantity column for each line. This reflects the pack-size-rounded final quantity.
If you need to override a quantity manually, edit the Quantity field directly on that line.
Important: If you enter a quantity that is not a multiple of the vendor's pack size, the system displays a warning. The warning does not block you from sending β you can proceed with an off-pack quantity if your vendor accepts it β but ordering in non-pack multiples may result in the vendor adjusting the shipment or invoicing differently.
For any line where no vendor has been assigned (either through purchase order history or the Product Master), the line appears in an Unassigned section. Select a vendor manually before sending.
Optionally, adjust the Price, Retail / Consumable split, or Type on individual lines as needed.
When all lines are ready, click Submit to send the purchase orders. The system raises one purchase order per vendor and displays a confirmation screen listing the resulting PO numbers.
Important: Sending purchase orders always requires an explicit click β the system never sends orders automatically.
Note: Products with no purchase order history and no vendor on the Product Master appear as "No vendor assigned β please select." Assign a vendor manually before sending, or deselect those lines to send the remaining orders first.
Worked example
Your center needs to reorder Hydrating Serum 50ml from two vendors:
- Vendor A (Last ordered vendor): pack size = 6 units. Raw suggested quantity = 9 units. Pack-size rounding: 9 Γ· 6 = 1.5 β round up to 2 packs = 12 units. Final quantity: 12 units.
- Vendor B (Least cost): pack size = 4 units. Raw suggested quantity = 9 units. Pack-size rounding: 9 Γ· 4 = 2.25 β round up to 3 packs = 12 units. Final quantity: 12 units.
If you switch the vendor strategy from Last ordered vendor to Least cost, the system reassigns the line to Vendor B and recalculates using Vendor B's pack size of 4. The Suggested qty column updates to 12 units (3 packs of 4), and the Pack size adjustment row in the explainability panel updates accordingly.
Tips
- Check the explainability panel before editing quantities. The Pack size adjustment row shows you exactly how much the raw quantity was rounded up and why. Editing a quantity without reviewing this context can result in ordering less than the reorder math recommends.
- Use the Least lead time strategy for Critical-status products. If a product's stock status is Critical, switching to Least lead time ensures the order goes to the vendor who can deliver fastest, even if their pack size results in a slightly higher quantity.
- Assign vendors to all products before bulk ordering. Products in the Unassigned section cannot be included in a sent purchase order. Resolve missing vendor assignments in the inventory module's product master data so future bulk PO runs include those products automatically.
- Verify pack sizes periodically. If a vendor changes their pack size and the product record is not updated, the system will apply the outdated pack size. Discrepancies between the suggested quantity and what the vendor actually ships are a common sign that pack sizes need updating.
- Settings changes take effect at the next nightly refresh. If you update a vendor's pack size today, the action grid will reflect the new value after the overnight recalculation β not immediately.
- The system does not enforce a vendor minimum order quantity. If your vendor requires a minimum order, verify the pack-size-rounded quantity meets it before sending the purchase order β the system will not raise the quantity for you.
Troubleshooting
- The Suggested qty column shows a much larger quantity than expected. Open the explainability panel and check the Pack size adjustment row. A large jump means the vendor's pack size is large relative to the raw suggested quantity β the system rounds up to the nearest full pack, never down. Verify the pack size on the vendor's product record in the inventory module.
- A product line shows "No vendor assigned β please select." The product has no purchase order history and no vendor linked on the Product Master. Assign a vendor in the inventory module's product master data, or select a vendor manually on this line before sending.
- Changing the vendor strategy does not update the Suggested qty. The system recalculates quantities when you change the strategy. If the value does not change, the newly selected vendor may have the same pack size as the previous vendor, or the product may have only one vendor on record. Check the vendor's product record to confirm pack size values.
- An off-pack-size warning appears after manually editing a quantity. You entered a quantity that is not a multiple of the vendor's pack size. This is a warning only β you can still send the order. If you want to clear the warning, adjust the quantity to the nearest multiple of the pack size shown in the Pack size adjustment row of the explainability panel.
- The Pack size adjustment row in the explainability panel shows a pack size of 1. The vendor's pack size has not been configured for this product. The system defaults to a pack size of 1 (individual units) when no pack size is set. Update the pack size on the vendor's product record in the inventory module.