Configure AI Inventory Manager settings
AI Inventory Manager resolves reorder coverage, safety days, and lead time settings through a four-level cascade β from organization-wide defaults down to individual SKU overrides β so you can apply broad defaults once and fine-tune only the products or centers that need different values.
Note: For conceptual background on how AI Inventory Manager works, see AI Inventory Manager overview.
Availability: AI Inventory Manager is a beta module. Contact your Zenoti Customer Success Manager to confirm it is active for your organization before following these steps.
Before you begin
- AI Inventory Manager must be active for your organization.
- You must have completed the onboarding wizard. See Set up AI Inventory Manager.
- You need Add or Edit permission on the Inventory security object to view and change AI Inventory settings.
Permission: Add or Edit (on the Inventory security object) β required to edit organization defaults, center overrides, and product overrides in AI Inventory Manager.
Note: Zenoti recommends restricting AI Inventory Manager settings to owners or senior managers. This is a configuration best practice, not a separate enforced permission β use your organization's existing Zenoti security roles to control access.
Steps
Understand the settings cascade
AI Inventory Manager resolves the effective value for each setting by checking levels in order from most specific to least specific. The first level that has a value set wins.
The cascade order is:
| Level | Scope | Wins over |
|---|---|---|
| SKU (product override) | A single product across all centers | All lower levels |
| Category override | All products in a category | Center/Region and Org |
| Center / Region override | All products at a specific center or region | Org default only |
| Organization default | All products at all centers | Nothing β lowest priority |
For example: if your organization default for Reorder coverage is 30 days, but you set a center override of 21 days for your downtown center, every product at that center uses 21 days β unless a specific product at that center also has a SKU-level override, in which case the SKU value takes precedence.
Important: Settings changes do not apply immediately to already-computed recommendations. All changes take effect at the next nightly refresh. If you save a change today, the updated values appear in the action grid tomorrow.
Worked example β cascade in action:
Your organization has these values set:
- Organization defaults: Reorder coverage = 30 days, Safety days = 2, Lead time mode = system-learned
- Center override (Downtown): Reorder coverage = 21 days
- Product override (Retinol Serum 30 mL): Safety days = 5
For Retinol Serum 30 mL at the Downtown center, the effective settings are:
- Reorder coverage = 21 days (center override wins over org default)
- Safety days = 5 (SKU override wins over org default)
- Lead time mode = system-learned (no override at any level β org default applies)
Edit organization defaults
Organization defaults apply to every product at every center unless a more specific override exists.
Open AI Inventory Manager and navigate to Settings.
Select Organization defaults.
Edit any of the following fields:
- Reorder coverage β The number of days of stock you want on hand after a replenishment order arrives. The default is 30 days. This is a target replenishment horizon, not a minimum-stock floor.
- Safety days β A buffer added on top of the lead time to absorb late deliveries or unexpected demand spikes. The default is 2 days. Leave blank or set to 0 to disable the buffer.
- Lead time mode β Controls how lead time is calculated for each product:
- System-learned (default) β the system derives lead time from your purchase-order history. Recommended when you have sufficient PO history.
- Manually override lead time β Enter a fixed value in the Lead time (days) field. A manual override always takes precedence over the system-learned value.
Select Save to apply your changes.
Important: Changes saved here take effect at the next nightly refresh, not immediately.
Add or edit center overrides
Use center overrides when a specific center has different replenishment needs β for example, a high-volume center that needs a shorter reorder coverage window.
Open AI Inventory Manager and navigate to Settings.
Select Center overrides.
Select + Add Override.
In the Center(s) field, search for and select the center or centers you want to configure.
Set the values you want to override for those centers:
- Reorder coverage β Enter a center-specific value, or leave blank to inherit the organization default.
- Safety days β Enter a center-specific buffer, or leave blank to inherit the organization default.
- Lead time mode β Choose system-learned or Manually override lead time and enter a value in Lead time (days).
Select Save to apply.
Note: A center override applies to all products at that center unless a SKU-level override exists for a specific product.
Note: The settings cascade recognizes a category-level override (see the cascade table under Understand the settings cascade). The current settings screen surfaces center overrides and product overrides directly. For category-wide needs that fall between a center override and an individual SKU override, use a product override for each affected SKU until a dedicated category override flow is available.
Add or edit product (SKU) overrides
Use product overrides for individual SKUs that have unusual lead times, demand patterns, or safety requirements that differ from their center defaults.
Open AI Inventory Manager and navigate to Settings.
Select Product overrides.
Select + Add Override.
In the Product field, search for and select the SKU you want to configure.
Set the values you want to override for that product:
- Reorder coverage β Enter a product-specific value, or leave blank to inherit from a higher level.
- Safety days β Enter a product-specific buffer, or leave blank to inherit from a higher level.
- Lead time mode β Choose system-learned or Manually override lead time and enter a value in Lead time (days).
Select Save to apply.
Note: If no products appear in the search results, confirm that the product exists in your organization's product catalog before trying again.
Review effective settings by center
To confirm which values are actually in use for a given center after the cascade resolves:
- Open AI Inventory Manager and navigate to Settings.
- Select Center overrides.
- Locate the center in the list. The columns Coverage, Safety, Lead time mode, and Lead (days) show the values stored at the center level.
Tip: To see the SKU-level effective value for a specific product, open the explainability panel for that product in the action grid. The Inputs section displays the reorder coverage, safety days, and lead time values that were used in the most recent nightly calculation. See Review the explainability panel for a recommendation.
Tips
- Set your organization defaults first, then add overrides only where needed. Most centers and products can share the same defaults. Adding overrides for every product increases maintenance overhead without improving forecast accuracy.
- Use category-level thinking when planning center overrides. If all products from a particular supplier arrive in 7 days, applying a center override with that lead time is more maintainable than creating individual SKU overrides for each product.
- Plan changes before the nightly refresh window. Because settings take effect at the next nightly refresh, make changes during the day so they are included in that night's calculation. Avoid making multiple conflicting changes in quick succession β only the last saved value is used.
- Use system-learned lead time when you have sufficient purchase-order history. The system derives lead time from your actual PO history, which tends to be more accurate than a fixed estimate. Switch to a manual override only when you know the system-learned value is unreliable β for example, for a new supplier with no history.
- Restrict settings access to owners or senior managers. Because settings changes affect all reorder recommendations for the next nightly cycle, limit edit access to staff who understand the replenishment model. Use your organization's Zenoti security roles to enforce this.
Troubleshooting
- My settings change is not reflected in the action grid. Settings changes take effect at the next nightly refresh, not immediately after saving. If you saved a change today, the updated recommendations will appear in the action grid the following day. If the change is still not reflected after the next business day, confirm that the correct override level was saved by reviewing Center overrides or Product overrides in Settings.
- A product is using the wrong reorder coverage value. The cascade resolves in this order: SKU override β Category override β Center/Region override β Organization default. Check each level in Settings to identify where the unexpected value is set. A SKU-level override always wins, even if a center override exists. Remove or correct the override at the most specific level that contains the wrong value.
- I set a manual lead time override, but the system appears to be using a different lead time. Confirm that the Manually override lead time option is selected and that a value is entered in Lead time (days) at the correct override level. If the field is blank or the mode is set to system-learned, the system will use the lead time derived from purchase-order history. A manual override only takes effect when explicitly set and saved.
- I cannot find the Settings screen in AI Inventory Manager. Confirm that you have Add or Edit permission on the Inventory security object. If you have the correct permission and the Settings option is still not visible, confirm with your administrator that AI Inventory Manager is active for your organization.