Inventory transfer recommendations
Transfer recommendations help you balance stock across your organization by identifying sibling centers that can donate excess inventory to an under-stocked center, or that need stock an over-stocked center could supply. The recommendations are informational β you review the suggested transfer quantities and then coordinate the physical transfer outside of AI Inventory.
Audience: Inventory managers and center owners who review AI Inventory reorder recommendations and coordinate inter-center stock movements.
Before you begin
- AI Inventory must be active for your organization and for any center you want to see as a transfer candidate. Centers that have not completed at least one prediction run do not appear in transfer recommendations.
- You must have Add or Edit permission on the Inventory security object to access AI Inventory Manager screens.
- Transfer recommendations are loaded on demand when you open the recommendation panel for a specific product β they are not pre-loaded for every row in the action grid.
- Recommendations reflect on-hand stock only. Incoming stock that is already in transit is excluded, because in-transit inventory cannot be redirected to another center.
Note: Transfer recommendations are informational in the current release. No button to initiate or record a transfer appears in the product β use your organization's standard transfer workflow after reviewing the recommendations here.
Steps
Open the transfer panel for a product
- Navigate to AI Inventory from the main navigation.
- Select the center you want to work from using the center selector. The recommendations you see are always from the perspective of the center you select here.
- In the action grid, locate the product you want to review. Use the Stock status filter to find products with a Critical, Low, or Overstock status quickly.
- Open the explainability panel for the product by selecting the row.
- Within the panel, select the Transfer section to load the transfer recommendations for that product.
Note: The transfer data loads at this point β it is not fetched when the action grid first renders. For products with many sibling centers, allow a moment for the data to appear.
Read the "Take from" recommendations (your center is under-stocked)
When the viewing center has less stock than it needs, the panel shows a Take from list. Each row in the list represents a sibling center that has transferable excess for this product.
The list is sorted by descending transferable excess β the center with the most available stock to donate appears first.
Each row shows:
| Column | What it means |
|---|---|
| Center name | The sibling center that could donate stock. |
| On-hand stock | The quantity currently held at that center, based on on-hand stock only. |
| Excess units | The transferable excess at the donor center β how much stock that center holds above its own reorder level. |
| Suggested qty | The recommended transfer quantity, computed as the smaller of your center's need and the donor center's excess. |
Important: The Excess units figure is computed from on-hand stock only. Incoming stock that a donor center is expecting from a vendor is not included, because that stock is already committed and cannot be redirected.
Read the "Give to" recommendations (your center is over-stocked)
When the viewing center holds more stock than it needs, the panel shows a Give to list. Each row represents a sibling center that is under-stocked and could use a transfer from you.
The list is sorted by descending need β the center with the greatest shortfall appears first.
Each row shows:
| Column | What it means |
|---|---|
| Center name | The sibling center that needs stock. |
| On-hand stock | The quantity currently held at that center. |
| Suggested qty | The recommended transfer quantity, computed as the smaller of the recipient center's need and your center's excess. |
Customize which columns you see
The action grid and transfer panel remember your column preferences between sessions. You can show or hide columns and reorder them to match your workflow β your choices are saved per user and restored the next time you return to the same view.
- To change which columns are visible, use the column visibility controls in the grid header. Select Select all to show all available columns, or Deselect all to hide all optional columns, then toggle individual columns as needed.
- To reorder columns, drag a column header to the position you want. The new order is saved automatically.
- Column visibility and column order are saved independently. Hiding a column does not affect your saved filters, and saving a filter does not reset your column layout.
- Sort order and the center selector are not saved as part of your preferences. Each session starts with the default sort, and the center selector always reflects your current selection.
Note: Saved preferences are personal β each user's column layout is independent of other users on the same organization.
Act on a recommendation
Because transfer recommendations are informational only, there is no in-app action to initiate or record the transfer from this panel. After reviewing the suggested quantities:
- Note the recommended center name and suggested transfer quantity.
- Use your organization's existing transfer workflow β for example, creating a transfer order in the standard Inventory module β to move the stock.
- Return to AI Inventory after the transfer is recorded. On-hand quantities update at the next nightly refresh, and the recommendations for this product will recalculate accordingly.
Tip: If your organization uses transfer orders, coordinate with the receiving center before initiating the transfer so both sides are aligned on timing and quantity.
Worked example
Example: Radiant Skin Serum 50 mL at your downtown center has a stock status of Critical β you have 3 units on hand and your reorder level is 18 units, giving you a need of 15 units.
You open the Transfer section of the explainability panel and see the following Take from list:
Center name On-hand stock Excess units Suggested qty Westside Center 42 24 15 Northgate Center 31 13 13 Eastfield Center 20 2 2 Westside Center has 24 transferable excess units. Your center needs 15. The suggested transfer quantity is 15 β the smaller of the two figures. You contact Westside Center's inventory manager and initiate a transfer order for 15 units using the standard Inventory module.
Tips
- Filter to overstock before looking for Give to opportunities. In the action grid, apply the Overstock filter under Stock status to see all products where your center holds excess. Open each product's transfer panel to find centers that need what you have.
- Prioritize Critical recipients. When reviewing the Give to list, the centers with the highest need appear first β these are most likely to be in Critical status themselves. Prioritizing them reduces the risk of stockouts across your organization.
- Check that the candidate center is enrolled in AI Inventory. Only centers that have completed at least one AI Inventory prediction run appear as transfer candidates. If an expected sibling center is missing from the list, confirm with your Zenoti administrator that AI Inventory has been activated and run for that center.
- Remember the nightly refresh cycle. On-hand quantities and reorder levels update overnight. If you completed a transfer today, the recommendations for affected products will recalculate at the next nightly refresh β not immediately.
- Use suggested quantities as a starting point. The suggested transfer quantity is the computed minimum of the two centers' need and excess figures. You can transfer a different amount based on operational factors such as shipping cost minimums or pack-size constraints.
- Your column layout persists between sessions. If you have hidden columns you rarely use β such as Excess value or Incoming stock β those preferences are restored automatically when you return. You do not need to re-apply your layout each time. If a colleague's view looks different from yours, that is expected: column preferences are saved per user.
Troubleshooting
A sibling center I expect to see is not appearing in the transfer list.
Only centers that are enrolled in AI Inventory and have completed at least one prediction run appear as transfer candidates. Contact your Zenoti administrator to confirm the missing center has been onboarded and that its first prediction run has completed.
The Transfer section shows no recommendations even though my center is under-stocked.
This can occur when no enrolled sibling center holds stock above its own reorder level β there is no transferable excess across the organization for this product. Consider placing a purchase order instead. You can also check whether sibling centers appear in the action grid with an Overstock status for the same product.
The on-hand quantity shown for a sibling center looks lower than expected.
Transfer recommendations reflect on-hand stock only. Pending deliveries and incoming purchase orders are excluded because in-transit inventory cannot be redirected. The figure you see is the quantity physically held at the sibling center at the time of the last nightly refresh.
The suggested transfer quantity seems too low.
The suggested quantity is always the minimum of your center's need and the donor or recipient center's corresponding excess or need figure. If the number is lower than you expected, check whether the donor center's excess is the limiting factor β it may not have as much transferable stock as its total on-hand figure suggests once its own reorder level is accounted for.
The Transfer section is not loading.
Transfer data is fetched on demand when you open the panel. If the section does not load, select Retry or close and reopen the panel. If the issue persists, check your network connection and confirm that AI Inventory is accessible for your organization.
My column layout changed after I applied a filter.
Column visibility and column order are saved independently from filter state. If your column layout appears to have reset, check whether a colleague sharing your browser profile made changes, or whether you are viewing a different center β the center selector is not part of saved preferences and does not affect your column layout. Reapply your preferred column visibility and order; the new layout saves automatically.