ZenotiHelp

Adjust stock

ZTZenoti Docs Team Updated September 28, 2026 11 min readGuide

Audience: Center admin, inventory manager

Use stock adjustments to manually add or remove inventory quantities outside the normal procurement, consumption, and transfer workflows. Common scenarios include correcting stock discrepancies after a physical count, recording breakage or theft, accounting for samples and giveaways, and writing off damaged or expired units when you do not need a centralized review.

⚠ Prerequisite β€” adjustment reasons must be configured first. Adjustment reasons are mandatory on every Adjust Stock save. If your organization has not yet configured at least one reason in Configuration > Inventory > Stock adjustment reasons, the Save button stays disabled and no adjustment will submit. Adjustment reasons are set up by your administrator in Set up stock actions. If the reason you need isn't in the list, ask your admin to add it. None of the scenarios listed above β€” physical count corrections, breakage, theft, samples, damaged-goods write-offs β€” will save until reasons exist.

Retail products and Consumable products are adjusted on separate screens in the Admin β†’ Inventory area. The steps below apply to both surfaces; cross-link to the other when you finish the surface you're on.

Note: Adjust Stock operates on the single On-Hand quantity for each product at the center. Organizations set up before the April 2020 release may still use the legacy Store/Floor model with separate Floor and Storage quantity inputs β€” for that case, see Store and floor inventory. Customers on the legacy model can migrate to On-Hand by contacting Zenoti Support or their Zenoti representative.

Important: Bulk adjustment via CSV is not currently supported. Adjustments must be applied per product. There is no approval workflow for stock adjustments β€” adjustments are applied immediately by users with the Add Adjustments permission. This is distinct from the audit-reconciliation workflow, which is approval-gated and is a separate feature.


On this page


Before you begin

Permissions (on the Inventory security object):

  • Add Adjustments β€” required to create a new adjustment (Add or Remove).
  • Edit Adjustments β€” required to modify an existing adjustment.
  • Delete Adjustments β€” required to delete an existing adjustment.
  • Stock adjustments are enabled by default for most organizations. If the feature is unavailable, contact your Zenoti representative.
  • Adjustment reasons are pre-configured by your administrator. If the reason you need is not in the list, ask your admin to add it before recording the adjustment.
  • For batch-tracked products, know which batch you are adjusting. The Adjust Stock screen lists batches sorted by nearest expiry β€” select the batch you need.
  • Adjustments are applied immediately upon saving. There is no manager-approval gate before the stock impact takes effect. If your organization uses the audit-and-reconciliation workflow for bulk corrections, see Run audit and reconciliation.

Open the Adjustments page

Both Add and Remove procedures start from the same page.

  1. At the center level, navigate to Inventory > Adjustments.

    The Adjustments list appears with previously recorded adjustments and an Add button.

Tip: Before adjusting, review the current on-hand quantity for the product in Inventory stock management. This avoids mistakes such as adding to a center that already received the stock via a transfer order.


Add stock manually

Use Add when you discover units that are not currently reflected in stock β€” for example, units found in storage during a count, returned samples, or correction of a prior under-receipt.

  1. From the Adjustments page, click Add.

  2. Set the adjustment type to Add.

  3. Search for and select the product.

  4. Enter the adjustment details:

    • Quantity β€” the number of units to add. Enter a single Quantity value. Organizations on the legacy Store/Floor model see separate Floor and Storage inputs instead β€” see Store and floor inventory.
    • Cost basis β€” pick the value used to cost the added units:
      • Perpetual Average Cost β€” the product's current weighted average at the center. Use this when stock arrives at the same price your existing inventory was valued at.
      • Last Non-Zero Perpetual Average β€” the most recent non-zero perpetual average. Useful when the current perpetual average is zero or stale (for example, after a write-off).
      • 3-Month Average β€” the moving average over the trailing three calendar months of delivery transactions. Useful for smoothing price spikes.
      • Custom Cost β€” a value you enter at adjustment time. Use this when you have a documented cost basis (a vendor invoice, a sample value) that does not match the running averages.
    • Reason β€” select a pre-configured reason. Examples may include "Found in storage", "Sample return", or "Correction" β€” the actual list is configured by your administrator.
    • Date β€” the effective date of the adjustment.
    • Batch details (batch-tracked products only) β€” batches are listed sorted by nearest expiry. Select the batch you need, or create a new one with Batch number and Expiry date. The "Select or create a batch number" option appears only when the product is batch-enabled.
  5. Add notes that explain the adjustment for audit purposes (for example, the count sheet reference number).

  6. Click Save.

    The Current Stock for the product updates immediately. The adjustment appears in the Adjustments list.

Worked example β€” correcting an under-receipt

After receiving 50 units of "Hydra-C Serum 30ml" on a purchase order (PO), a count reveals 53 units are physically on the shelf. The discrepancy of 3 units needs to be recorded.

  • Product: Hydra-C Serum 30ml
  • Adjustment type: Add
  • Quantity: 3
  • Cost basis: Perpetual Average Cost (the units match the price already in stock)
  • Reason: Correction
  • Date: today's date
  • Notes: "3 extra units found after PO-2026-00482 receipt β€” count confirmed by warehouse staff"

After saving, the on-hand quantity increases from 50 to 53, and a stock-ledger event records the adjustment with the user, date, and reason.


Remove stock manually

Use Remove to deduct units from current stock β€” for example, breakage, theft, expired write-offs, or correction of a prior over-receipt. For damaged or expired units, this is the simple write-off path; use this article instead of Track damaged and expired products when you do not need a centralized tracking-center review.

Note: Removed units are valued at Perpetual Average Cost β€” there is no cost-basis selector on Remove (unlike Add). This keeps the cost of goods consistent with the running perpetual average.

  1. From the Adjustments page, click Add.

  2. Set the adjustment type to Remove.

  3. Search for and select the product.

  4. Enter the adjustment details:

    • Quantity β€” the number of units to remove. The system rejects the save if removal would drive the on-hand balance negative β€” see Troubleshooting.
    • Reason β€” select a pre-configured reason. Examples may include "Damaged", "Expired", "Theft", or "Sample" β€” the actual list is configured by your administrator.
    • Date β€” the effective date of the adjustment.
    • Batch details (batch-tracked products only) β€” batches are listed sorted by nearest expiry. Select the batch you want to deduct from. Zenoti does not auto-select a batch β€” staff pick the appropriate one.
  5. Add notes that explain the adjustment for audit purposes.

  6. Click Save.

The Current Stock for the product reduces immediately. The adjustment appears in the Adjustments list and a corresponding stock-ledger event is written.


Edit an adjustment

Use Edit Adjustment to correct a recorded adjustment β€” for example, a wrong quantity, a wrong reason, or a typo in the notes β€” without deleting and re-creating it. The edit modifies the existing adjustment record in place, preserving the original adjustment ID and audit trail.

Permission: Edit Adjustments on the Inventory security object.

  1. From the Adjustments page, locate the adjustment row.

  2. Click the Edit Adjustment control on the row to open the edit form.

  3. Update the editable fields β€” quantity, reason, batch details, and notes. The product and adjustment type (Add or Remove) cannot be changed; if these are wrong, delete the adjustment and create a new one.

  4. Click Save.

    The original adjustment record updates in place. The on-hand quantity and stock ledger reflect the corrected values. The audit trail records the edit user and timestamp.


Delete an adjustment

Use Delete Adjustment to remove an adjustment that should not have been recorded at all (for example, a duplicate). The deletion voids the adjustment and reverses its stock impact.

Permission: Delete Adjustments on the Inventory security object.

Important: Deletion is intended for clear errors discovered shortly after entry. For corrections discovered later, prefer recording a counter-adjustment with a clear reason and notes so the history reflects the correction event rather than suppressing the original entry.

  1. From the Adjustments page, locate the adjustment row.

  2. Click the Delete Adjustment control on the row.

  3. Confirm in the confirmation dialog that appears: Do you want to delete the Adjustment?

    The adjustment is marked void, and the on-hand quantity is restored to its pre-adjustment value. The deletion is captured in the audit trail.


View adjustment history

Every adjustment is recorded in the audit trail. To review:

  1. Navigate to Inventory > Adjustments.

  2. Filter by date range, product, or adjustment type.

  3. Review the list β€” each row shows product, quantity, reason, user, date, batch (if applicable), and notes.

For full historical traceability across receipts, consumption, transfers, conversions, and adjustments, use Stock ledger report and Inventory traceability report.


Fields shown on the adjustment screen

When you adjust stock, the screen surfaces several monetary-impact fields the auditor uses to track the financial effect of each adjustment:

  • Value per unit β€” The cost field shown on the adjustment screen. It indicates the monetary impact of each unit being adjusted, calculated from the cost basis you selected for Add or from the perpetual average cost for Remove.
  • Transaction cost β€” The cost recorded at the exact moment the adjustment is saved. This is the value that lands in the stock-ledger row for the adjustment and is used in the audit trail and downstream cost of goods calculations. It does not change retroactively if the perpetual average shifts later.
  • Total value β€” The product of quantity Γ— value per unit. Surfaced on the adjustment summary before you click Save so you can review the financial impact before committing.

Auto adjustment vs. manual adjustment

Adjustments fall into two classes based on who creates them:

  • Manual adjustments β€” adjustments you create from the Adjustments page using the Add button. The procedures in this article cover the manual flow.
  • Auto adjustment (system-generated) β€” adjustments Zenoti creates automatically when the system detects a stock discrepancy during a downstream event. The most common trigger is a purchase order (PO) receipt where the delivered quantity differs from the ordered quantity and the receiving operator confirms the discrepancy β€” the system records a compensating auto adjustment so the ledger reconciles. An auto adjustment is flagged as System in the adjustment history.

The Edit and Delete capabilities differ between the two classes:

Class Edit Delete
Manual All editable fields can be changed: Quantity, Cost basis, Reason, Date, Batch, Notes. Allowed (with the Delete Adjustments permission).
Auto Only Value per unit is editable β€” Quantity, Source, and the triggering event are locked. Allowed for auto adjustments only. Delete reverses the system-generated impact.

Both types appear in the Adjustments list and the Stock ledger report; filter by source (User vs System) to separate them.


Group and total adjustments on the list

The Adjustments list supports two list-view aids that help when reviewing many adjustments at once:

  • Drag-to-group β€” Drag any column header into the grouping area at the top of the list to group the rows by that column's values. Useful for grouping by Reason ("show me all Damaged adjustments"), by Product, by Adjusted by, or by Source. Drag multiple columns into the grouping area to build a hierarchy.
  • Footer totals β€” A summary row at the bottom of the list shows the cumulative Adjusted quantity and Transaction cost across all rows that match the current filter. When grouping is active, sub-totals also appear per group so you can see, for example, total shrinkage value per Reason.

Edit lock β€” the 90-day boundary

Once a financial lock is applied for an accounting period, adjustments dated within that period cannot be edited or deleted. The lock is enforced by the 90-day edit lock policy: you cannot back-date or modify adjustments older than 90 days from today, and you cannot edit any adjustment that falls inside a finalized financial period. This is a system constraint and is not configurable. If you need to correct a locked adjustment, contact Zenoti Support or your Zenoti representative β€” they can extend the edit window for genuine reconciliation needs.


Troubleshooting

Issue Likely cause and fix
Add button is missing. You do not have the Add Adjustments permission, or the page failed to load. Verify with your admin and refresh the page.
Remove is blocked with a negative-balance validation error. The remove quantity exceeds the available on-hand (or, for batch-tracked products, the available quantity in the selected batch). Reduce the quantity or split the removal across batches.
The batch field does not appear for a product I expect to be batch-tracked. The product may not be flagged as batch-enabled. Verify in product settings β€” see Configure batch and expiry management.
The reason I need is not in the dropdown. Reasons are pre-configured. Ask your admin to add the reason under Configuration > Inventory > Stock adjustment reasons.
The adjustment did not update the Current Stock report. Reports may take a moment to refresh. Reload the report or check the Stock ledger report for the adjustment line β€” if the ledger has the entry, the report will reflect it on next refresh.
The Edit Adjustment or Delete Adjustment control is not visible on a row. You may not have the Edit Adjustments or Delete Adjustments permission, or the adjustment is older than 90 days and is subject to the edit lock. Contact Zenoti Support or your administrator.

What happens next

  • The on-hand (or floor / storage) quantity updates immediately.
  • A stock-ledger event is written β€” see Stock ledger report.
  • For Remove adjustments with reasons such as "Damaged" or "Expired", the value impact appears in Cost of goods report under shrinkage.
  • Aging analysis on the affected batches/products refreshes β€” see Inventory aging report.
  • Edits and deletes are recorded in the audit trail with user and timestamp; the original adjustment ID is preserved on edit, and the stock impact is reversed on delete.

Tips

  • Run a quick stock check before a large adjustment β€” see Inventory stock management β€” to catch transfers in flight that would otherwise be over-counted.
  • Always pick a specific reason rather than a generic "Other" so that downstream reports (shrinkage, sample, breakage) classify correctly.
  • For damaged or expired units that need org-wide review before disposition, use the tracking-center path described in Track damaged and expired products. For one-center write-offs, use Remove on this page.
  • After a physical count, do not adjust each variance one by one β€” use Run audit and reconciliation so the system generates the adjustment lines in bulk. The audit-and-reconciliation workflow supports bulk corrections and is approval-gated when your organization requires it.
  • For corrections discovered after the fact, enter a counter-adjustment rather than deleting the original β€” this preserves the audit chain and makes the correction event visible in reports.

Was this article helpful?
Your feedback helps us improve our documentation.