ZenotiHelp

Track damaged and expired products

ZTZenoti Docs Team Updated September 5, 2026 11 min readGuide

Audience: Center admin, inventory manager

Products may become damaged or reach their expiry date at any point β€” at the loading dock during receipt, on the shelf during routine inspection, or when a guest returns a purchase. Zenoti supports two disposition paths for damaged or expired stock. This article documents both as siblings β€” pick the path that matches your organization's review and reporting needs.

You may discover damaged or expired products when:

Note: Damaged and expired units are deducted from the product's On-Hand quantity at the center. Organizations on the legacy Store/Floor model deduct from the storage quantity instead β€” see Inventory stock management for the model overview; to migrate, contact Zenoti Support or your Zenoti representative.


On this page


Before you begin

Permission: Add Adjustments (on the Inventory security object) β€” Allows creating stock adjustments for damaged and expired products.

A damaged-and-expired workflow touches several inventory features. The exact permissions you need depend on which path you take and which disposition options you exercise:

Permission Used for
Add Adjustments (under Inventory) Creating stock adjustments with reason Damaged or Expired (Path A and the audit-and-reconciliation discard option).
Edit Adjustments / Delete Adjustments (under Inventory) Correcting or removing an adjustment after the fact. See Adjust stock.
RAISE_ORDER (under Inventory Manager) Creating a return order to send damaged stock back to the vendor. See Manage product returns.
Edit Inventory (under Inventory) Raising and receiving transfer orders to move stock to the virtual tracking center. See Manage transfer orders.

For the complete inventory permission reference, see Inventory Permissions FAQ.

You also need:


Choose a disposition path

If… Use
You need to write off a small quantity at a single center with no centralized review. Path A β€” Simple write-off via inventory adjustment. Quick. One step. Logs a stock-ledger event.
You want to consolidate damaged or expired stock across multiple centers for periodic org-wide review before disposition. Path B β€” Tracking-center workflow. Setup-heavier. Adds visibility and review checkpoint before discard or vendor return.

The two paths are not mutually exclusive β€” your org may use Path A for routine single-center write-offs and reserve Path B for high-value items or audit-controlled stock.


Path A β€” Simple write-off via inventory adjustment

Use this path when you want to remove damaged or expired units from stock with no centralized review.

  1. Open the affected product and create an inventory adjustment with reason Damaged or Expired. See Adjust stock for the full procedure.
  2. Enter the quantity to remove from on-hand stock. Add a note describing the disposition (for example, Discarded 3 units (200ml) of Herbal Silky Shampoo β€” bottles damaged in transit).
  3. Save the adjustment.

What happens:

  • Stock decreases at the center where you created the adjustment.
  • A stock-ledger event is recorded with the adjustment reason β€” see Stock ledger report.
  • COGS reflects the write-off via the perpetual average calculation β€” see Cost of goods report.

When this path is enough, stop here. When you need org-wide consolidation or a review step before discard, use Path B.


Path B β€” Tracking-center workflow

Use this path when your organization wants to consolidate damaged or expired stock across centers for periodic review before final disposition. The mechanism is a virtual tracking center β€” a non-operational center created solely to hold damaged or expired stock pending disposition decisions.

Note: The "tracking center" is configuration vocabulary used in this article β€” it is not a UI label. There is no Tracking center toggle or setting in Zenoti. You implement the tracking center by creating a regular center and using it conventionally for damaged-and-expired stock.

Step 1 β€” Set up a virtual tracking center

The virtual tracking center is a one-time setup. After it is in place, all centers in the organization can transfer damaged or expired stock to it for centralized review.

  1. Create a non-operational center (for example, named Track Returns). The center exists in the organization tree but does not run operations or accept guest bookings. See Create center for the create-center procedure.
  2. Enable product associations. Associate every product the org wants to track for damage or expiry with the new center, so each center can transfer relevant stock to it.
  3. Assign an Inventory Manager role to a user who will own ongoing review at the tracking center β€” viewing stock, reviewing reports, and deciding on disposition. See the role assignment guide in Create center.
  4. Configure inventory tax at the tracking center to match the org's standard inventory tax setup, so that valuation at the tracking center is consistent with operating centers.

Note: For organizations with more than 10 centers, contact Zenoti Support to assist with the tracking-center setup β€” specifically the bulk product-association step.

Step 2 β€” Transfer damaged or expired stock to the tracking center

Whenever a center identifies damaged or expired stock, transfer it to the tracking center via a transfer order (TO).

  1. At the originating center, raise a transfer order with the tracking center as the destination. See Manage transfer orders for the full TO procedure.
  2. Enter the damaged or expired units as the transfer quantity.
  3. In Notes, capture the disposition detail β€” for example, Damaged in receiving β€” 5 units of Lotus Face Gel, broken seal or Expired 2026-04 β€” 12 bottles of Herbal Shampoo.
  4. Dispatch the TO from the originating center and receive it at the tracking center.

What happens:

  • Stock decreases at the originating center.
  • Stock increases at the tracking center, with the disposition Notes preserved on the TO record.
  • The TO appears in the Inventory > Orders list, filterable by destination center.

Step 3 β€” Review tracking-center stock periodically

The Inventory Manager assigned to the tracking center reviews accumulated stock on a cadence the org chooses (weekly, monthly, end-of-quarter):

  1. Open Inventory > Orders at the tracking center. Filter by Transfer To Center to see all incoming TOs with quantity, value, and Notes.
  2. Open the Current stock report at the tracking center to see total damaged-and-expired quantity and value held organization-wide.
  3. Decide a disposition for each lot β€” discard, return to vendor, or hold for audit.

Step 4 β€” Dispose of stock from the tracking center

After review, exercise one of the disposition options at the tracking center to clear the stock.


Disposition options

These options apply to either path. In Path A, the adjustment is the disposition. In Path B, choose one of these to clear stock from the tracking center.

Discard via audit and reconciliation

Use audit and reconciliation to write off damaged or expired stock that you do not plan to return to the vendor. Sequence the actions as follows.

During the return / discard event:

  1. Identify the damaged or expired units to discard.
  2. Capture disposition notes describing what is being discarded and why (for example, Discarded 3 units (200ml) of Herbal Silky Shampoo β€” bottles damaged in transit).

After the return / discard event (audit step):

  1. Run an audit at the center holding the stock (the tracking center for Path B, or the operating center for Path A if you are using audit-based discard instead of an adjustment). See Run audit and reconciliation for the audit procedure.
  2. Reconcile the discrepancy with reason Damaged or Expired and the disposition notes from step 2.
  3. Verify the write-off in the Audit history report. Click the Audit Date column on a row to see the audit details, including the Notes you captured.

Return to vendor via return order

When the vendor accepts returns of damaged or expired stock, use a return order β€” this is the, structured workflow.

  1. Create a return order against the vendor and add the damaged or expired products. See Manage product returns for the full procedure.
  2. Enter return quantities as negative values (this is intentional, not a workaround β€” see the next note).
  3. Raise the return order, send it to the vendor, and mark as Delivered when the vendor confirms receipt.

Important: Some legacy guidance describes "raising a PO with negative quantities" against the vendor as a way to handle returns. The negative-quantity entry technique is a UI quirk of the underlying form, not the recommended path. Use the structured return-order workflow in Manage product returns β€” it is the and supported route.

Damaged on receipt from a vendor

When you receive damaged or expired units directly from the vendor, do not start a tracking-center transfer or an adjustment. Handle the disposition at the receipt step itself β€” see Receive deliveries β€” Handle damaged or short shipments for the recommended workflow (mark the delivery as partial, reject the damaged units, optionally raise a return order for the rejected items).

Partial delivery with damaged units

When a PO arrives as a partial delivery and only some of the received units are damaged, you accept the good units against the PO and handle the damaged ones separately:

  1. Open the PO and select Receive.
  2. Enter the quantity actually received in usable condition (the good units only). The PO transitions to Partially delivered with the good quantity counted into stock.
  3. For the damaged units in the same shipment, use the disposition path that matches your scale:
  • Path A β€” Simple write-off if it's a single-center, low-quantity discard. Record an inventory adjustment with reason Damaged for the rejected units. Add a note linking the adjustment to the PO Ref #.
  • Path B β€” Tracking-center workflow if your organization consolidates damaged stock for centralized review.
  1. If the vendor will replace the damaged units in a future shipment, leave the PO open in Partially delivered state; the replacement shipment counts as the next partial delivery against the same PO.
  2. If the vendor agrees to credit the damaged units instead of replacing them, raise a return order against the vendor for the damaged quantity. See Manage product returns.

The PO stays in Partially delivered state until the full ordered quantity is accounted for through deliveries, returns, or PO closure β€” at which point it transitions to Delivered or Reconciled.

Guest returns of damaged or expired products

When a guest returns a damaged or expired product:

  1. Process the refund through the POS (Point of Sale). See Manage product returns β€” Guest product returns for the refund flow.
  2. Decide between Discard or Restock during the return:
  • Discard β€” Refunds the product and marks the entire returned quantity as discarded. No further action needed.
  • Restock β€” Refunds the product and adds it back to on-hand quantity. Use this only when the unit is genuinely sellable. If you restock and later identify the unit as damaged or expired, follow Path A or Path B from the operating center.
  1. Track guest-side returns in the legacy Returns report (Reports > Inventory > Returns), which lists customer returns alongside vendor returns

The report's Restocked Quantity column tells you whether returned units went back into stock or were discarded:

Restocked Quantity Meaning
Yes Returned and put back into stock.
No Returned and not restocked (likely discarded).

The difference between Quantity and units marked Yes in Restocked Quantity is the discarded count β€” useful for tracking damage-related shrinkage from guest returns.


Reporting

Report Use to track
Stock ledger report Every adjustment, transfer, and audit-write-off event with reason and quantity. The single source of truth for "what changed and why."
Inventory aging report Stock by age bucket. Useful for identifying near-expiry inventory before it expires.
Cost of goods report COGS impact of write-offs and damaged-stock disposition.
Current stock report Total quantity and value held at the tracking center (Path B).
Audit history report Audit-based write-offs with disposition notes. Click Audit Date on a row to see full audit details.
Near-expiry report Available only when batch and expiry management is enabled. Surfaces batches approaching expiry so you can act before they expire.

Inventory value impact

Damaged-and-expired write-offs reduce both quantity on hand and inventory value:

  • Path A (adjustment): the adjustment line decreases on-hand quantity and reduces inventory value at the perpetual average cost. The decrease flows into COGS for the period via the standard valuation calculation.
  • Path B (transfer + audit-write-off): the transfer to the tracking center is value-neutral at the org level (stock and value move from operating center to tracking center). The eventual audit-based write-off at the tracking center is the value-decreasing event.

For the underlying valuation methodology, see Inventory costing and valuation.


Troubleshooting

Issue Likely cause and fix
I cannot create an inventory adjustment with reason Damaged or Expired. You are missing the Add Adjustments permission. Ask your admin to grant it on the Inventory security object. See Inventory Permissions FAQ.
Transfer order to the tracking center is not visible from the originating center's Procurement page. Filter by status Created or Raised. If the TO was raised but the tracking center has not received it, the TO is in transit and shows under the originating center's outgoing list, not the destination's stock.
The Near-expiry report is missing or empty. The Near-expiry report is available only when batch and expiry management is enabled at the org level and the products are flagged as batch-tracked. See Configure batch and expiry management.
Discrepancy between stock at the tracking center and the cumulative TO quantity. Some TOs may still be in Raised or In transit status β€” only Delivered TOs add to the tracking center's stock. Filter incoming TOs by status to reconcile.
The Returns report shows No for Restocked Quantity but the unit is still on the shelf. The unit was physically restocked but the Restock action was not selected during the POS return. Run an audit and adjust to reconcile, then update process so the provider selects Restock at refund time.

Tips

  • For high-value or audit-controlled stock, prefer Path B even at single-center orgs β€” the explicit transfer-then-discard sequence is easier to evidence at audit time than a single adjustment line.
  • Capture disposition Notes verbatim β€” Discarded β€” broken seal β€” vendor lot 8472 is more useful at quarter-end than Discarded.
  • Run the Inventory aging report on a monthly cadence to catch near-expiry stock before it actually expires. Earlier action lets you transfer to the tracking center for vendor return rather than discard.

What's covered

Need help? If a column or field described here isn't clear, contact Zenoti Support.

Was this article helpful?
Your feedback helps us improve our documentation.