ZenotiHelp

Convert products

ZTZenoti Docs Team Updated September 28, 2026 6 min readGuide

Audience: Center admin, inventory manager


On this page


Product conversion lets you move stock between the retail and consumable (professional supply) portions of a product without changing the purchase price or value. This ensures you can fulfill a service even when the consumable stock runs out, as long as the same product is available in the retail portion.

Important: A conversion does not affect barcode uniqueness. Two active products still cannot share a barcode, whether or not conversions are enabled between them. If you are building a conversion SKU, assign it its own unique barcode. Barcode uniqueness is enforced separately from the conversion workflow β€” a barcode assigned to one active product cannot be reassigned to another active product regardless of any conversion relationship between them.

Before you begin

Permission: Edit (under Inventory) β€” Required to convert products in inventory.

Ensure the following before you convert products:

  • Your admin has marked the product as both retail and consumable in the product master.
  • The Enable product conversions setting is enabled at the organization level. This makes the Convert option available on the inventory dashboard.
  • Optionally, enable Allow product checkout, transfer and conversion when stock is not available at the organization level. This allows conversion to proceed with a warning even when the source stock is low.

Important: When you convert a product from retail to consumable or vice-versa, the purchase price and value remain unchanged. The conversion re-classifies quantity on the same product record; it does not recalculate cost.

Important: For organizations that signed up with Zenoti after April 2020, store and floor quantities are combined into a single on-hand quantity. The Convert From and Convert To fields described in the steps below do not appear for those organizations.

Steps

Convert a product

  1. Navigate to the Product Conversion page:

    • For retail products: Inventory > Retail > Convert
    • For consumable products: Inventory > Consumable > Convert
  2. Search for the product to convert by name, code, or barcode.

    The current stock level of the product appears.

    Note: The product does not appear in search results if it has not been marked as both retail and consumable in the product master.

  3. From the Convert From drop-down, select the stock area (On-Hand or Floor) where the product currently resides.

  4. From the Convert To drop-down, select the destination stock area.

    Note: If your organization signed up after April 2020, the Convert From and Convert To fields do not appear. Conversion moves between retail and consumable classifications directly.

  5. In the Quantity box, enter the quantity to convert.

  6. From the Employee drop-down, select the employee responsible for the conversion. By default, the logged-in user is pre-selected.

  7. In the Comments box, enter any relevant notes about the conversion.

  8. Click Finish.

    The conversion is recorded and the stock quantities update for each product type.

Worked example: A center has 10 units of a shampoo product with 3 units in consumable stock and 7 units in retail stock. A provider needs 2 more consumable units. The inventory manager navigates to Inventory > Retail > Convert, searches for the shampoo, sets Convert From to On-Hand (retail), Convert To consumable, enters Quantity: 2, selects their name as the employee, adds the comment "Service overflow β€” chair 3", and clicks Finish. The retail on-hand drops to 5 units and the consumable on-hand increases to 5 units.

View conversion history

You can view all conversions under the HISTORY tab for a specific date or date range.

With each conversion, Zenoti transfers the converted stock quantity and value between the retail and consumable classifications. Check the current stock level (retail or consumable) to verify the updated quantity after conversion.

Impacts and considerations

  • Conversion does not grant a barcode exception. A conversion relationship between two products has no effect on barcode uniqueness: two active products still cannot share a barcode, whether or not conversions are enabled between them. If you are building a conversion SKU, assign it its own barcode. This applies even when the conversion is between the retail and consumable portions of the same product record β€” the barcode uniqueness check runs across all active products organization-wide.

  • Changing product type does not auto-convert stock. If you change the product type from consumable to retail or vice-versa in the product master, stock is not converted automatically. Zenoti displays a warning that you must perform the conversion manually. Click OK to continue changing the product type, then convert the product manually so the stock levels update correctly.

  • Conversions must be re-set if the product type changes. Whether conversions must be re-configured after a product-type change depends on your organization's setup. If the product no longer appears in conversion search results after a type change, verify that it is still marked as both retail and consumable in the product master.

  • Cost basis is preserved. The perpetual average cost is not recalculated during conversion. Only the stock classification changes; the units retain their existing cost basis.

  • Batch-tracked products. For batch-enabled products, each batch's quantity, expiry date, and remaining count carry over to the new product type. Batch numbers are preserved across conversion.

Tips

  • Before converting, confirm the source stock level in the Current Stock report so you know the maximum quantity available for conversion.
  • Use the Comments field to record the reason for conversion (for example, "Service overflow β€” color bar") so the conversion history is auditable.
  • If you need to convert in the opposite direction later, run the conversion again β€” the stock ledger records both events separately, giving you a full audit trail.

Troubleshooting

Symptom Likely cause Resolution
Convert option is missing for a product Product is not marked as both retail and consumable, or Enable product conversions is not enabled Verify the product type in the product master and confirm the organization setting is on
Product does not appear in conversion search results Product is not associated with the current center, or is not marked as both retail and consumable Check product-center associations and product type in the product master
Conversion saves but the stock level does not update immediately The Current Stock report may take a moment to refresh Reload the report or check the Stock Ledger report for the conversion transaction line
Error: "Insufficient stock for conversion" The source product type has less on-hand than the quantity entered Reduce the conversion quantity to match available stock, or split into multiple smaller conversions
Conversion history shows only recent events Date range filter is too narrow Expand the date range on the HISTORY tab to include older conversion dates
Convert From and Convert To fields are absent Organization signed up after April 2020 β€” store and floor are unified into on-hand This is expected behavior; conversions between retail and consumable still work but do not expose the store/floor selector
A barcode assigned to the source product is rejected when added to the conversion SKU The barcode is already in use on an active product Assign a new, unique barcode to the conversion SKU β€” sharing barcodes between active products is not permitted regardless of any conversion relationship

FAQ

  • Can I reverse a conversion? Yes β€” run the conversion again in the opposite direction (consumable β†’ retail or retail β†’ consumable). The stock ledger records both events.
  • Does conversion update the cost basis? No. The perpetual average cost is preserved across conversion. Only the product type classification changes; units retain their existing cost.
  • Are batch numbers preserved when I convert? Yes. For batch-tracked products, each batch's quantity, expiry date, and remaining count carry over to the new product type.
  • Why is the converted quantity less than what I entered? The conversion screen allows partial quantities. Verify you entered the full intended quantity; the system does not back-calculate from the destination type.
  • Why must conversions be re-set after a product-type change? Whether conversions must be re-configured after a product-type change depends on your organization's setup. If the product no longer appears in conversion search results after a type change, verify that it is still marked as both retail and consumable in the product master.
  • Can two products involved in a conversion share a barcode? No. Barcode uniqueness is enforced across all active products regardless of any conversion relationship. Each active product must have its own unique barcode.
Was this article helpful?
Your feedback helps us improve our documentation.