ZenotiHelp

Manage transfer orders

ZTZenoti Docs Team Updated September 23, 2026 13 min readGuide

Audience: Center admin, inventory manager

Transfer orders (TOs) move products between centers within your organization. Use this article to create, raise, dispatch, receive, modify, and return transfer orders, and to view the order list with filters.

Example: Center A (a warehouse) pushes 20 units of Product X to Center B. Center A creates a TO, raises it, and dispatches 18 units (with 2 unavailable). Center B receives 16 units (2 are missing in shipment), marks Partial Delivery, and resolves the 2 outstanding units via stock adjustment after physical reconciliation.


On this page


Push vs Pull transfer model

Transfer orders support two initiation models β€” choose the one that matches your operational pattern:

  • Push β€” The source center initiates the transfer by creating and raising the order on behalf of the receiving center. Typical for warehouse-to-store distribution.
  • Pull β€” The receiving center initiates the transfer by creating and raising the order to the source center. Typical when an operating center identifies a stock shortage and pulls from another center or warehouse.

The transfer order always uses the transfer price and transfer tax of the source center, regardless of which center initiated.


Transfer order lifecycle

A transfer order moves through these statuses from creation to delivery:

Status Description
Created The order is saved as a draft. You can edit details, add products, or remove products.
Raised The order is raised and submitted to the other center.
Updated The order has been edited after raising or partially received and saved (without marking as partial delivery). Stock is not yet affected.
In transit The order is dispatched. Stock has been deducted from the source center and is en route to the receiving center. The receiving center cannot edit the dispatched quantity.
Partially delivered The order has been received in part and marked as partial. Stock at the receiving center increases by the received quantity. The remaining raised quantity stays open.
Delivered The order has been fully received. Stock at the receiving center increases by the received quantity, and the order is closed.

Note: Status names display in sentence case with a lowercase second word (In transit, Partially delivered) β€” match this casing in your reference materials. The internal code-side enum value InTransit is not customer-facing.


Before you begin

Permission: Add (under Inventory) β€” required to create transfer orders.

Permission: Edit (under Inventory) β€” required to edit, dispatch, and receive transfer orders.

Permission: You need the permission to raise transfer orders (the Raise action on the Inventory security object) to submit a transfer order to the other center.

  • Products must be associated with both the source and receiving centers before they can be included in a transfer order.
  • Transfer order settings must be configured at the organization and center level. See Set up transfer orders.
  • The source center must have sufficient stock for the products being transferred.

Steps

Create a transfer order

A transfer order starts in Created status as a draft. You can edit details, add products, or remove products while in this status.

  1. Navigate to Inventory > Orders.
  2. Click Add transfer.
  3. Select the From Center (source) and To Center (receiving center) β€” choose source and receiving center based on whether you are pushing or pulling stock per the Push vs Pull transfer model.
  4. Add products to the order. For each product, enter the Transfer quantity. Review available stock at the source center before confirming quantities.
  5. Click Save to save the order as a draft.

Raise a transfer order

Raising a transfer order submits it to the other center.

  1. Open the transfer order you want to raise.
  2. Review the order details, products, and quantities.
  3. Click Save & Raise.

The order moves to Raised status.

Note: If your center has the Prevent center from raising transfer orders setting enabled, the Save & Raise button does not appear. You can still create transfer orders, but another center must raise them.

If the Consider raised purchase orders/transfer orders for calculating Auto PO/TO quantity setting is enabled, raising a transfer order updates the auto-PO and auto-TO recommendation quantities. The Retail Undelivered Qty and Consumable Undelivered Qty values update, and the Recommended Level reduces accordingly. See Configure automatic orders.

Notify the source center (Email To Center)

After a receiving center raises a transfer order, an Email To Center button appears on the order page when all of these conditions are met:

  • You are at the receiving center (not the source center) and the order is in Raised or Updated status.
  • The Transfer Order Mail email template is enabled for your organization (it is off by default).
  • Your role does not carry the Hide Price action under Inventory.
  1. Click Email To Center.

    An email is sent to the source center's configured email address.

Dispatch a transfer order

The source center dispatches the order to move it to In transit status.

  1. Open the raised transfer order at the source center.
  2. Enter the dispatch quantities for each product. The source center may dispatch less than (short shipment) or more than the raised quantity (when permitted by org settings).
  3. For batch-tracked products, select the batches to dispatch β€” see Receive batch-tracked products for batch handling.
  4. Click Save & Dispatch.

After dispatch, the receiving center cannot edit certain fields β€” see Edit-restriction matrix after dispatch.

A transfer order can have more than one dispatch open at a time. Each time the source center dispatches part of an order, that shipment becomes its own In transit dispatch. They do not merge, and the order is not finished until each one has been received.

This changes how the receiving center works: rather than receiving the order as a whole, you receive one dispatch at a time, selecting which dispatch you are recording on the receive screen. If you try to record a delivery without selecting one, Zenoti prompts Please choose a dispatch to deliver and moves the cursor to that list.

While more than one dispatch is still open, Zenoti prevents the order from being completed and tells you to deliver the earlier dispatches individually first. The source center is also prevented from adding another dispatch at that point β€” if you are asked to confirm, the dispatch is not saved whichever answer you give. Receive the open dispatches, then continue.

This applies where Restrict delivery of transfer orders in the source center is on, so that the receiving center records deliveries β€” see Dispatch and deliver in a single step.

Receive a transfer order

The receiving center records receipt of products from a dispatched transfer order. Receiving updates the current stock at the receiving center.

  1. Open the transfer order at the receiving center.

  2. Enter the received quantities for each product.

  3. For batch-tracked products, assign batch details for the received stock.

  4. Choose how to record the receipt:

    Action Resulting status Stock impact
    Click Save only Updated No stock change.
    Click Partial Delivery Partially delivered Stock at the receiving center increases by the received quantity. Remaining raised quantity stays open against the order.
    Click Full Delivery Delivered Stock at the receiving center increases by the received quantity. The order is closed.

Note: By default, the received quantity must equal the dispatched quantity to mark as Delivered. To allow a received quantity greater than the dispatched quantity (over-shipments), enable Allow delivered quantity to be more than ordered quantity in transfer order. To record Received < Dispatched (short shipments), use Partial Delivery. The remaining raised quantity stays open until subsequently received or the order is closed short.

Multi-product partial handling

When a TO contains multiple products and the receiving center records different quantities per item (Product A fully received, Product B partially received, Product C not received), the TO's overall status remains Partially delivered until every line item reaches its full raised quantity. To close out a TO with permanent shortage on one or more line items, mark Partial Delivery and accept the partial state β€” re-shipment of missing items requires a new TO.

Dispatch and deliver in a single step

For immediate transfers (e.g., warehouse to adjacent center, or single-step movement within the same building). Available at the source center while Restrict delivery of transfer orders in the source center is off (the default); when that setting is on, the source center sees Save & Dispatch instead and the receiving center records the delivery.

  1. Open a transfer order in Raised status at the source center.
  2. Enter the quantities being transferred.
  3. For batch-tracked products, enter the batch details.
  4. Select Full Delivery (or Partial Delivery for part of the quantities). Either button saves the order and records the delivery in the same step β€” there is no separate Save afterwards.

Stock is deducted from the source center and added to the receiving center in one operation. The order moves directly from Raised to Delivered.

Modify a recorded dispatch or delivery

If you discover an error in a recorded dispatch or delivery β€” wrong quantity, wrong batch number β€” use Modify to correct it without creating a new record.

  1. Open a transfer order with dispatch or delivery recorded.
  2. Click Modify.
  3. Adjust the editable fields (quantities, batch details).
  4. Click Save.

The original dispatch or delivery entry updates in place. The order status changes to Updated to indicate post-receipt modification.

Create a return transfer order

When the receiving center needs to return some or all of a delivered transfer order:

  1. Open a delivered transfer order.
  2. Click Return.
  3. Specify the products and quantities to return to the source center.
  4. Save the return.

The system creates a standalone return transfer order β€” it is a separate order and does not carry a reference to the original TO, so record the original order number in the return's notes if you need the trail. Process the return through the standard dispatch (from the original receiving center, now acting as source for the return) and delivery (back at the original source) workflow.

Cancel or delete a transfer order

The cancellation path depends on the lifecycle state:

Current status Cancellation path
Created Delete the TO β€” no stock has moved.
Raised / Updated Delete the TO.
In transit Delete order is available and voids the order along with every partial dispatch and delivery recorded against it (the system warns before it does). It does not move any stock back. The quantity already dispatched stays deducted from the source center and is not added at the destination, and once the order is gone there is no record explaining the difference. Delete an In-transit order only when nothing physically moved β€” for example a duplicate order raised in error and dispatched on paper only. If stock actually left the source center, do not delete the order: raise a return transfer order from the destination back to the source β€” see Create a return transfer order.
Partially delivered Delete the TO (voids the recorded dispatches/deliveries, after a warning), or use a return transfer order to send back the received units while keeping the history.
Delivered Deletion is no longer available. Use a return transfer order.

Deleting requires the delete permission under Inventory. An individual partial dispatch/delivery group can also be deleted from the order without deleting the whole TO. Deleting a dispatch group behaves the same way as deleting the order: its quantities return to the order's outstanding remainder, but no stock moves between centers.

Receive batch-tracked products

For batch-tracked products, the dispatch and receive forms include additional required fields:

  • At dispatch (source center): select which batches to send. Batch selection is enforced (required) for batch-enabled products β€” you cannot dispatch a batch-tracked product without specifying the batch.
  • At receipt (receiving center): confirm the received batches and quantities. The receiving center cannot create new batch numbers β€” the dispatched batches carry through.

Cross-link: Batch and lot tracking.

View and filter transfer orders

  1. Navigate to Inventory > Orders.

  2. Apply filters:

    • Center β€” filter by source or receiving center.
    • Date range β€” filter by order date.
    • Status β€” Created, Raised, Updated, In transit, Partially delivered, Delivered.
    • Search β€” free-text search.

Edit-restriction matrix after dispatch

After dispatch, the receiving center cannot edit specific fields. The source center may continue editing some fields until the order is marked Partially delivered or Delivered.

Product-level fields:

Field Editable by source before dispatch Editable by receiving center after dispatch
MSRP Yes No
Unit Price Yes No
Retail / Received Yes No
Consumable / Received Yes No
Discount Yes No
Taxes Yes No

Order-level fields:

Field Editable by source before dispatch Editable by receiving center after dispatch
Discount % or $ Yes No
Discount $ Yes No
Shipping & Handling Yes No
Other Yes No

If the Restrict recipient center from editing transfer orders setting is enabled, the receiving center cannot edit ANY field. If the Restrict recipient center from editing price, discount, and tax fields after a transfer order is raised setting is enabled, the receiving center cannot edit those fields once the order is Raised. See Set up transfer orders.


Admin settings that affect this workflow

Setting Effect Configured in
Allow delivered quantity to be more than ordered quantity in transfer order Allows the receiving center to record Received > Raised, accommodating over-shipments. Set up transfer orders
Restrict partial deliveries for transfer order Disables partial delivery for TOs β€” the receiving center can only record the delivery in full (the TO shows as Delivered). Set up transfer orders
Prevent center from raising transfer orders Hides the Save & Raise button at the configured center; orders must be raised by another center. Set up transfer orders
Restrict delivery of transfer orders in the source center Off (default): the source center can deliver a raised TO in one step with Full Delivery or Partial Delivery. On: the source center sees Save & Dispatch instead and only the receiving center can record the delivery. This setting has no effect on the Email To Center button. Set up transfer orders
Restrict recipient center from editing transfer orders Locks all receiving-center-side editing once the order is raised. Set up transfer orders
Restrict recipient center from editing price, discount, and tax fields after a transfer order is raised Locks specific receiving-center-side fields once raised. Set up transfer orders
Enable product transfers between centers (organization-level) When disabled, prevents creating new TOs and hides the transfer-order-from-PO copy option. Existing TOs remain visible. Set up transfer orders
Consider raised purchase orders/transfer orders for calculating Auto PO/TO quantity Raising a TO reduces the Recommended Level on the Inventory Alerts report. Configure automatic orders

Troubleshooting

Issue Likely cause and fix
Save & Raise button is missing. The Prevent center from raising transfer orders setting is enabled at your center. Another center must raise the TO, or have an admin disable the setting.
Email To Center button is missing. The button shows only at the receiving center (never the source), only while the order is Raised or Updated, only when the Transfer Order Mail email template is enabled for your organization (it is off by default), and not for roles that carry Hide Price. The Restrict delivery of transfer orders in the source center setting does not control it.
Dispatch quantity validation rejects my entry. Dispatch must be a positive integer, and (depending on settings) cannot exceed the raised quantity. Check the Allow delivered quantity to be more than ordered quantity in transfer order setting if you need to dispatch more.
Received quantity is rejected for partial delivery. The receiving center cannot enter a received quantity greater than the dispatched quantity unless the over-receipt setting is enabled. For shortages, use Partial delivery.
Transfer order stuck in In transit. The receiving center has not recorded receipt β€” or has recorded some but not all of the order's dispatches. An order can have more than one dispatch open at once and cannot be completed while more than one is outstanding. Open the TO at the receiving center, receive each open dispatch in turn, then complete the order.
A message says to contact the Support team about partial dispatches that are not delivered yet. More than one dispatch is open, and full delivery is blocked until they are cleared. This is usually fixable without support: receive the open dispatches one at a time, then complete the order. Contact Zenoti Support if no dispatch is listed, or if one cannot be received.
I cannot edit the price/discount/tax fields after the TO is raised. This is expected when Restrict recipient center from editing price, discount, and tax fields after a transfer order is raised is enabled. The source center may still edit these.

What happens next

Video: Create a Transfer Order (1:33) β€” How to create a transfer order.

Video: Dispatch a Transfer Order (1:23) β€” How to dispatch a transfer order.

Video: Receive a Transfer Order (1:31) β€” How to receive a transfer order.


Tips

  • You cannot receive products without a purchase order or transfer order.
  • For franchise operations, each franchise raises a TO to another center or to the warehouse, similar to purchasing from an external vendor.
  • Use the dispatch-and-deliver option for immediate same-building transfers.
  • For batch-tracked products, ensure batch details are correctly assigned during dispatch and delivery to maintain traceability.
  • Monitor in-transit transfer orders regularly to ensure timely receipt by receiving centers.

Was this article helpful?
Your feedback helps us improve our documentation.