ZenotiHelp

Set up purchase orders

ZTZenoti Docs Team Updated September 23, 2026 7 min readGuide

Audience: Administrator, inventory manager

Configure purchase order (PO) settings to control barcode scanning, delivery restrictions, email formats, default vendors, and receipt number generation for your organization and centers. These settings determine how your centers create, receive, and process POs.


On this page


Before you begin

Permission: Add (under Inventory) β€” Allows creating and configuring purchase orders.

  • You need access to Administrator mode.
  • Organization-level settings require organization-level access.
  • Center-level settings require center-level access.
  • If your business integrates Zenoti with an accounting platform, confirm whether that platform can sync only one delivery per order. This determines whether you should restrict partial deliveries.

Steps

Enable multiple scans of barcodes

Allow users to scan the same barcode multiple times for a single PO or TO (Transfer Order).

  1. At the organization level, select the Configuration icon and search for the Enable multiple scans of barcodes for transfer and purchase orders setting.
  2. Open the setting from the Inventory section.
  3. Enable this setting to allow multiple scans of the same barcode for a single transfer and purchase order.
  4. Select Save.

Restrict partial deliveries for purchase orders

Some businesses need to restrict partial deliveries because their accounting platform can sync only one delivery per order. You can disable the Partial Delivery button at the organization level.

  1. At the organization level, select the Configuration icon and search for the Restrict partial deliveries for purchase order setting.
  2. Open the setting from the Inventory section.
  3. Enable this setting to prevent partial deliveries for items ordered through a PO.
  4. Select Save.

When you enable this setting, the PO workflow changes as follows:

  • The Partial Delivery button is disabled on the order page. The inventory manager cannot receive multiple deliveries from a vendor on a single order.
  • The receiving center can only record the delivery in full; the order then shows as Delivered.
  • If the inventory manager needs to receive remaining stock from the vendor, they must raise a new PO.

Note β€” existing POs at the flip: The setting takes effect immediately for every purchase order, including those already Raised or Partially delivered. It is not limited to POs raised after the toggle is enabled, so a partially delivered PO cannot receive a further partial delivery once the setting is on β€” raise a new PO for the outstanding quantity.

Example: A three-center organization uses QuickBooks and needs one-delivery-per-PO to match its accounting sync. An administrator enables Restrict partial deliveries for purchase order at the organization level. The next time a center raises a PO for 100 bottles of shampoo and only 60 arrive, the receiver cannot post a 60-bottle partial delivery β€” the Partial Delivery button is greyed out, and the receiver must either wait for the remaining 40 or (if the vendor cannot supply them) record the delivery at 60 bottles β€” the PO shows as Delivered β€” and raise a new PO for the shortfall. POs raised before the toggle flip continue to accept partial deliveries.

Restrict partial deliveries for transfer orders

Transfer-order partial-delivery restrictions are configured separately in the transfer-order setup article β€” see Set up transfer orders for the procedure and impact bullets.

Allow delivered quantity greater than ordered

Enable this setting to allow the receiving center to record a delivered quantity that exceeds the raised quantity on a PO. Useful when vendors include bonus units or correct prior shortfalls without you raising a new PO.

  1. At the organization level, select the Configuration icon and search for the Allow delivered quantity to be more than ordered quantity in purchase order setting.
  2. Open the setting from the Inventory section.
  3. Enable the setting.
  4. Select Save.

Impact: With this setting on, the receiver can post a Retail / Received or Consumable / Received quantity higher than the raised quantity at Receive deliveries. With it off, received quantity is capped at raised.

Show alert if mandatory fields are missing when receiving

Enable this setting to require selected fields (Address of Delivery, Date of Shipment, Date of Delivery) when the receiver marks a PO as Partially Delivered or Delivered.

  1. At the organization level, select the Configuration icon and search for the Show alert if the following mandatory fields are missing when receiving the order setting.
  2. Open the setting from the Inventory section.
  3. Select which fields are mandatory (Address of Delivery, Date of Shipment, Date of Delivery).
  4. Select Save.

Impact: Pairs with Receive deliveries β€” the receiver sees a prompt for missing fields on the Partial Delivery or Full Delivery action and cannot complete delivery until the selected fields are entered.

Configure default purchase order email format

Set up the email template used when sending POs to vendors. The template supports merge tokens for PO number, center name, vendor name, order date, and total amount.

  1. At the organization level, select the Configuration icon and search for the Purchase order email format setting.
  2. Configure the email subject line and body template.
  3. Select Save.

Configure default attachment format for PO emails

Choose whether PO emails to vendors include the order as a PDF or a CSV attachment. Some vendors require CSV for direct import into their procurement system; most accept PDF for human review.

  1. At the organization level, select the Configuration icon and search for the Select a format to email the Purchase Order setting.
  2. Open the setting from the Inventory section.
  3. Select PDF or CSV.
  4. Select Save.

Auto-generate receipt number for goods received

Configure the prefix and starting numeric seed for the GRN (Goods Received Note) numbers Zenoti issues when a PO or transfer order is partially or fully delivered. A GRN number tracks each receipt against the corresponding order, so you can reconcile vendor invoices against deliveries.

  1. At the center level, select the Configuration icon and search for the Auto-generate receipt number for goods received setting.
  2. Open the setting from the Inventory section.
  3. Enable the setting.
  4. In GRR Prefix, enter an alphanumeric prefix that is added to the beginning of each issued GRN number (for example, BHM-GRN- for a Birmingham center).
  5. In Enter a starting value for the receipt number, enter the next numeric value to issue. The next GRN number generated at the center will be the next sequential value after this seed (for example, a start value of 10 issues 11 as the next GRN).
  6. Select Save.

Note: The GRN prefix and start value are configured per center, so each center's receipt numbers are distinct. Customer-configurable PO-number prefixes are not currently exposed at the tenant level; PO numbers use the system default numbering.

Configure default vendors for purchase orders

Set the default vendors that are pre-selected when a user starts a new PO at a center. Retail and consumable defaults are configured separately so that a center can pick up retail stock from one supplier and consumable stock from another.

  1. At the center level, select the Configuration icon and search for the Specify default vendors for purchase orders setting.
  2. Open the setting from the Inventory section.
  3. Select the default vendor for Retail products.
  4. Select the default vendor for Consumable products.
  5. Select Save.

Note: If a configured default vendor is later deactivated, the dropdown for that product type remains unselected β€” there is no automatic fallback. Re-select an active vendor to restore the default.

Display products in the order they were added

Enable this setting to keep the line items on a saved order in the sequence someone added them, instead of listing them alphabetically. Useful when your team checks an order against a vendor's packing list or invoice.

  1. At the organization level, select the Configuration icon and search for the Display products in the order added in inventory orders setting.
  2. Open the setting from the Inventory section.
  3. Enable the setting.
  4. Select Save.

Impact: With this setting off (the default), a saved order lists products alphabetically by name, with the most recent delivery date first where a name repeats. With it on, products stay in the order they were added. Either way this affects the saved order's grid only β€” it does not change the order of the catalog you pick from when adding products.

Tips

  • Decide the partial-delivery rule before you onboard an accounting integration. Flipping the toggle after a year of partial-delivery history does not retroactively close partially delivered POs; it changes behavior for new ones only.
  • Use the email template's merge tokens (PO number, center name, vendor name, order date, total) rather than hard-coded text. Templates update once and apply everywhere.
  • Give each center a distinct GRN prefix (for example, BHM-GRN- for Birmingham). This makes receipts traceable at a glance in multi-center finance reviews.

Troubleshooting

Problem Resolution
Partial Delivery button greyed out on a new PO The organization-level Restrict partial deliveries for purchase order setting is enabled. Either receive the full order in one event or raise a new PO for the remaining quantity.
Vendor does not receive the PO email Confirm the vendor record has a valid email address (see Manage vendors) and that the default PO email template is configured. Resend from the PO details page.
GRN numbers collide across centers GRN prefixes are per center β€” assign a distinct prefix to each center.
Default vendor dropdown is blank at a center The center's default vendor may have been deactivated. Open the center's PO default settings and re-select an active vendor.
Was this article helpful?
Your feedback helps us improve our documentation.