ZenotiHelp

Set up stock actions

ZTZenoti Docs Team Updated September 5, 2026 8 min readGuide

Audience: Administrator, inventory manager

Stock action settings control how your centers handle product checkouts, transfers, conversions, and returns. Configure these settings to automate common inventory processes, define how stock moves between your center inventory and the floor, and create custom reasons for stock adjustments.

Important: The Reason dropdown on the Adjust Stock screen is mandatory and pulls from the reasons configured on this page. If no reasons exist, the adjustment cannot be submitted. Configure at least one adjustment reason at the organization level before users attempt their first adjustment.


On this page


Before you begin

Permission: Edit (under Inventory) β€” Required to change stock-action settings.

Permission: Add and Edit (under Inventory) β€” Required to create or modify stock adjustment reasons.

Permission: Reconcile (under Inventory) β€” Required to reconcile the difference between expected and audited stock value.

  • You need organization-level access to configure most stock-action settings and to add stock adjustment reasons.
  • You need center-level access to configure prefix settings for checkouts and conversions, and to override auto-checkout behavior for individual centers.
  • You can edit existing stock adjustment reasons at both the organization level and the center level.
  • All stock-action settings are in the Stock actions section of the Configuration page.
  • Stock adjustment reasons are in the Inventory section of the Configuration page.

Settings overview

Use the table below to locate the setting that affects the stock action you need to govern.

Setting Stock action it affects Level
Enable auto checkouts from store to floor for retail product sales Retail product sale (store β†’ floor) Organization
Enable auto checkouts for product sales Retail product sale (store β†’ floor) Center
Enable auto checkouts from store to floor for product transfers Transfer (store β†’ floor) Organization
Enable auto checkouts for transfers Transfer (store β†’ floor) Center
Enable auto checkouts for consumable products Consumable used in a service or recorded as consumption Organization and Center
Allow product checkout, transfer, and conversion when stock is not available Checkout, Transfer, Conversion, Return Organization
Allow to restock returned products Return (POS/Webstore guest returns) Organization
Enable product conversions Conversion (retail ↔ consumable) Organization
Checkout prefix Checkout receipt numbering Center
Conversion prefix Conversion receipt numbering Center
Stock adjustment reasons Stock adjustment (all types) Organization (master list), Center (per-center edits)

Steps

Enable auto checkouts for retail product sales

Two settings govern the store-to-floor auto-checkout that fires when a retail product is billed at Point of Sale. The organization-level setting establishes the default for all centers; the center-level setting governs that specific center.

Important: Enabling the transfer auto-checkout settings (described in the next section) does not enable the product-sales auto-checkout behavior. The two pairs of settings have near-identical names but control entirely separate triggers. Confirm you are editing the correct setting for your intended outcome.

What happens when these settings are disabled: When both settings are off, a retail sale draws down the floor quantity without drawing down the store quantity. Over time, the store bucket stops reflecting what is actually on the shelf β€” the discrepancy surfaces later as a stock count that cannot be reconciled without manual correction.

Organization level

  1. At the organization level, select the Configuration icon and search for Enable auto checkouts from store to floor for retail product sales.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Center level

  1. At the center level, select the Configuration icon and search for Enable auto checkouts for product sales.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Note: The center-level setting governs that center's behavior. If the organization-level setting is enabled but the center-level setting is disabled, that center does not perform the auto-checkout on retail sales.

Enable auto checkouts for product transfers

Two settings govern the store-to-floor auto-checkout that fires when a product is transferred from one center to another. The organization-level setting establishes the default; the center-level setting governs that specific center.

Important: Enabling these transfer settings does not enable the product-sales auto-checkout behavior. The two pairs of settings have near-identical names but control entirely separate triggers. Confirm you are editing the correct setting for your intended outcome.

Organization level

  1. At the organization level, select the Configuration icon and search for Enable auto checkouts from store to floor for product transfers.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Center level

  1. At the center level, select the Configuration icon and search for Enable auto checkouts for transfers.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Enable auto checkouts for consumable products

This setting fires when a consumable product is used in a service or recorded as consumption via Appointment Product Consumption (APC). It is available at both the organization and center levels.

Organization level

  1. At the organization level, select the Configuration icon and search for Enable auto checkouts for consumable products.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Center level

  1. At the center level, select the Configuration icon and search for Enable auto checkouts for consumable products.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Allow product checkout, transfer, and conversion when stock is unavailable

Enable this setting to continue product usage even when products are temporarily out of stock.

  1. At the organization level, select the Configuration icon and search for the Allow product checkout, transfer, and conversion when stock is not available setting.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Impact: Enabling this toggle lets checkout, transfer, and conversion proceed even when the on-hand balance would go negative. Negative inventory then appears on reports, and cost calculations may produce Offset corrections when the balance returns positive. For a deep dive on how negative balances are displayed, reconciled, and corrected, see Negative inventory FAQ.

Allow to restock returned products

Enable this setting so that products returned by guests at Point of Sale or via Webstore can be restocked to on-hand inventory rather than only discarded. When enabled, the guest-return workflow exposes both a Restock quantity and a Discard quantity so the front desk can split a return β€” for example, three returned bottles where two are intact and one is damaged.

  1. At the organization level, select the Configuration icon and search for the Allow to restock returned products setting.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Impact: When disabled, the front desk can refund a returned product but cannot restock it β€” the entire returned quantity is treated as discarded. The Restocked Quantity and Discarded Quantity columns on returns reports are visible only when this setting is enabled. See Manage product returns for the front-desk workflow.

Enable product conversions

Enable this setting to allow stock conversion between retail and consumable for products that are flagged as both. When enabled, the Convert menu is exposed in the inventory module and centers can record retail-to-consumable or consumable-to-retail movement.

  1. At the organization level, select the Configuration icon and search for the Enable product conversions setting.
  2. Open the setting from the Stock actions section.
  3. Enable the setting.
  4. Select Save.

Tip: Conversion preserves purchase cost β€” when a retail unit is converted to consumable (or vice versa) the unit cost and stock value remain unchanged. The product itself must be flagged as both retail and consumable on its master record. See Convert products for the operational workflow.

Configure checkout prefix

Set a prefix for checkout reference numbers at the center level.

  1. At the center level, select the Configuration icon and search for the Checkout prefix setting.
  2. Enter the desired prefix for checkout reference numbers.
  3. Select Save.

Configure conversion prefix

Set a prefix for conversion reference numbers at the center level.

  1. At the center level, select the Configuration icon and search for the Conversion prefix setting.
  2. Enter the desired prefix for conversion reference numbers.
  3. Select Save.

Create stock adjustment reasons

Stock adjustment reasons provide an audit trail for why stock levels were changed. Every adjustment requires a reason selection β€” the reason dropdown is mandatory. Create your organization's reason list before running adjustments.

  1. At the organization level, select the Configuration icon and search for the Stock adjustment reasons setting.
  2. Open the setting from the Inventory section.
  3. Select Add.
  4. Enter the reason name (for example, Damaged, Expired, Theft, Correction, Promotional giveaway).
  5. Configure the reason setting:
  • Active β€” Toggle to make the reason available or unavailable for selection.
  1. Select Save.

Tip: Create specific adjustment reasons that match your business operations. Generic reasons make it harder to identify patterns in stock discrepancies during audits.

Edit stock adjustment reasons

  1. Navigate to Stock adjustment reasons at the organization or center level.
  2. Select the reason you want to modify.
  3. Update the reason name or toggle the Active setting.
  4. Select Save.

Tips

  • Seed a minimum reason set before your first audit cycle: Damaged, Expired, Theft, Correction, Internal Use. Extending the list later is straightforward; fixing an audit trail that used a generic "Other" reason is not.
  • If you enable Allow product checkout, transfer, and conversion when stock is not available, train front-desk staff on the negative-inventory signal on reports so that negative balances trigger a restock order, not a silent drift.
  • Keep checkout and conversion prefixes distinct per center so that receipt numbers are traceable at a glance (for example, BHM-CO- for a Birmingham checkout vs BHM-CV- for a Birmingham conversion).
  • When configuring auto-checkout settings, work through all three trigger types β€” retail product sales, product transfers, and consumable products β€” in sequence. Each pair of settings is independent; enabling one does not enable the others.

Troubleshooting

Problem Resolution
Adjustment cannot be saved β€” "Select a reason" error The Reason dropdown is mandatory on every adjustment. Open Stock adjustment reasons and confirm at least one reason is marked Active.
Checkout fails when stock is zero The organization-level setting Allow product checkout, transfer, and conversion when stock is not available is disabled. Enable it (and review the downstream impact on negative inventory) or receive stock via a purchase order first.
Checkout or conversion numbers restart or overlap between centers Prefix is configured at the center level β€” confirm each center has a distinct prefix.
Store quantity does not decrease after a retail sale The Enable auto checkouts from store to floor for retail product sales (organization) or Enable auto checkouts for product sales (center) setting is disabled. Enable both for the affected center. Do not confuse these with the transfer auto-checkout settings, which have similar names but fire on a different trigger.
Store quantity does not decrease after a product transfer The Enable auto checkouts from store to floor for product transfers (organization) or Enable auto checkouts for transfers (center) setting is disabled. Enable both for the affected center.
Was this article helpful?
Your feedback helps us improve our documentation.