ZenotiHelp

Store and floor inventory

ZTZenoti Docs Team Updated September 28, 2026 9 min readGuide

⚠ Legacy model β€” pre-April 2020 only. This article describes the legacy Store/Floor inventory model. Organizations set up with Zenoti from April 2020 onward use the On-Hand quantity model instead β€” a single quantity per product per center, with no Store/Floor split. To migrate from Store/Floor to On-Hand, contact Zenoti Support or your Zenoti representative. The migration is one-way. See Switch to the on-hand quantity model for context.

Audience: Inventory managers, center admins, and auditors working in centers that physically separate back-of-house storage from the guest-facing floor or treatment areas.

Zenoti tracks inventory at two physical locations within each center: the store (back storage) and the floor (treatment rooms and display areas). This separation gives you visibility into where products are located, not only how many you have.


On this page


Before you begin

  • Your organization must use the legacy Store/Floor inventory model. If your organization was set up with Zenoti from April 2020 onward, you use the On-Hand quantity model and this article does not apply.
  • To move stock between store and floor, you need the Add Adjustments action under Inventory in your security role.
  • To enable or disable the Unify Store and Floor organization setting, you need the Edit action under Inventory at the organization level.
  • To perform inventory audits, you need the standard audit permissions under Inventory; see Inventory permissions FAQ.

What is store vs. floor?

Location Description Examples
Store Back storage area. Products are received here from purchase orders and transfers. This is your warehouse or stockroom. Stockroom, supply closet, warehouse shelf
Floor Guest-facing or treatment area. Products are moved from the store to the floor when they are ready for use or display. Treatment room, retail display, provider station

This distinction helps you:

  • Plan replenishment β€” Know when the floor is running low and needs restocking from the store.
  • Audit accurately β€” Count floor and store quantities separately during physical audits.
  • Identify discrepancies β€” Compare what was moved to the floor against what was consumed or sold.

How quantities are tracked

Zenoti maintains six quantity fields per product-center combination:

Field Description
Storage Quantity Combined store quantity (retail + consumable).
Floor Quantity Combined floor quantity (retail + consumable).
Retail Store Quantity Retail products in the store.
Retail Floor Quantity Retail products on the floor.
Consumable Store Quantity Consumable products in the store.
Consumable Floor Quantity Consumable products on the floor.

All inventory operations β€” purchase order deliveries, transfer receipts, adjustments, audits, and auto-checkouts β€” update both the combined and type-specific quantity columns.

Unify store and floor

If your business does not need to track store and floor separately, you can enable the Unify Store and Floor organization setting. When this setting is enabled:

  • Floor and store quantities are combined into a single total.
  • The floor quantity column is hidden from all inventory screens, including audit, adjustments, stock, and purchase orders.
  • Audit data entry shows a single On Hand Quantity count column instead of separate Qty In Store and Qty In Floor count columns.
  • Adjustments record a single combined quantity.
  • Auto-checkout settings are forced on.
  • Retail ↔ Consumable conversions between Floor buckets are blocked. Only Store-to-Store conversions are permitted.

This setting is configured at the organization level and applies to all centers.

Important: Whether toggling Unify Store and Floor on or off performs any migration of existing Floor quantities into Store is not documented behavior. Do not assume a one-time migration occurs when changing this setting.

Tip: Enable Unify Store and Floor if your centers do not have a physical separation between storage and service areas, or if tracking two locations adds unnecessary complexity to your workflow.

Move stock between store and floor

To transfer products from the store to the floor (or vice versa), use a stock adjustment:

  1. Navigate to Inventory > Adjustments.
  2. Select Add.
  3. Select the product and center.
  4. To move from store to floor:
    • Enter a negative storage quantity (the amount leaving the store).
    • Enter a positive floor quantity (the amount arriving on the floor).
  5. To move from floor to store, reverse the signs.
  6. Select an adjustment reason.
  7. Select Save.

The adjustment is recorded in the adjustment history with both floor and storage quantities for audit trail purposes.

Note: Adjustments are also created automatically during reconciliation when audited floor or store quantities differ from pre-audit values.

Worked example β€” receive, move, sell

A salon receives 50 units of a shampoo product:

  • Monday: The center records a purchase-order delivery for 50 units. All 50 units land in the Store (Store = 50, Floor = 0). The destination location cannot be chosen per line during purchase order receipt β€” stock reaches the floor only through a subsequent adjustment.
  • Tuesday: The center moves 10 units from Store to the retail display on the Floor using an adjustment (enter -10 Storage Quantity and +10 Floor Quantity in the same adjustment). Store = 40, Floor = 10.
  • Wednesday: A guest buys 3 units at Point of Sale (POS). POS deducts from Floor first. Store = 40, Floor = 7.

If the Allow sale at any stock level center setting is enabled (see Configure inventory settings) and Floor runs to zero mid-sale, POS falls through to Store. Otherwise, POS blocks the sale once Floor is exhausted.

Store and floor impact across workflows

The following table summarises how the Store vs Floor distinction interacts with each inventory workflow.

Workflow Store/floor behavior
Purchase order delivery Received quantities land in Store by default. The destination location (Store vs Floor) cannot be chosen per line during purchase order receipt. Stock reaches Floor only through a subsequent adjustment using the Add Adjustments action.
Transfer order dispatch Decrements the source center's Store quantity. Floor is not affected.
Transfer order receipt Increments the destination center's Store quantity. Floor is not affected.
POS retail checkout Deducts from Floor first. If Floor is zero or insufficient and the Allow sale at any stock level center setting is enabled, the deduction falls through to Store. With the setting disabled, checkout fails once Floor is exhausted.
Service auto-checkout (consumables) Same as POS checkout: Floor first, fallback to Store only if Allow sale at any stock level is enabled.
Product conversion (retail ↔ consumable) Preserves the Store/Floor location β€” Retail Store converts only to Consumable Store, Retail Floor only to Consumable Floor (and vice versa). A single conversion transaction moves a chosen quantity between one bucket pair; it does not move Store and Floor quantities together. Organizations with Unify Store and Floor enabled cannot convert Floor buckets.
Stock adjustment Directly updates either Store or Floor (or both in a single transaction). Used to move stock between the two.
Audit With Unify disabled, Store and Floor are counted separately (Qty In Store and Qty In Floor columns). With Unify enabled, a single On Hand Quantity count column is shown.
Reconciliation Generates adjustments per location to bring Store and Floor quantities in line with the audited counts.

Store and floor in audits

During a physical inventory audit:

  1. When Unify Store and Floor is disabled: The audit grid exposes separate Qty In Store and Qty In Floor count columns per product. You enter counts for each location, and the system compares your counts against the pre-audit store and floor values.
  2. When Unify Store and Floor is enabled: The auditor sees a single On Hand Quantity count column. The system combines any floor value with the storage value automatically.

The audit detail records capture:

  • Pre-audit store and pre-audit floor β€” Snapshots of the quantities before the audit.
  • Audited store and audited floor β€” The physical counts you entered.
  • Reconciled store and reconciled floor β€” The final quantities after reconciliation.

Store and floor in reports

The V2 Current Stock, Stock Ledger, and Inventory Aging reports show aggregate quantities only β€” for example, On-Hand Quantity β€” and do not include separate Store/Floor breakdown columns regardless of whether the Unify Store and Floor setting is enabled.

Store/Floor quantity breakdowns appear only in legacy inventory screens and reports. For example, the legacy Inventory Value report includes Store and Floor quantity columns, and the legacy product consumption report includes Opening Qty Store and Opening Qty Floor columns.

When Unify Store and Floor is enabled, floor columns are hidden across all inventory screens including audit, adjustments, stock, and purchase orders.

Retail and consumable conversions

When you convert a product between retail and consumable classification, Zenoti preserves the Store/Floor location of the stock being converted:

  • Retail Store quantity converts only to Consumable Store.
  • Retail Floor quantity converts only to Consumable Floor.
  • The same rules apply in reverse for consumable-to-retail conversions.

A single conversion transaction moves a chosen quantity between one bucket pair. It does not move Store and Floor quantities together in a single operation.

Important: Organizations that have enabled Unify Store and Floor cannot perform conversions involving Floor buckets. Attempting to convert Floor quantities when this setting is active is blocked by the system.

Batch tracking and the default batch

When batch tracking is enabled for a product, stock that existed before batch tracking was switched on β€” or that arrives without batch data β€” is represented as a default batch. This unnamed batch carries a placeholder expiry date of 2100-01-01 (a far-future date), and its on-hand quantity accounts for the difference between the net product quantity and the sum of all real batch quantities.

This means:

  • Enabling batch tracking does not require you to re-enter existing stock.
  • Historical transactions are not altered.
  • If you see a batch with a far-future expiry date and no batch name, that batch represents pre-batch legacy stock. It is not a data error.

The Store/Floor model and batch tracking interact the same way batch tracking interacts with the on-hand model: each batch carries its own quantity, and Store/Floor quantities per batch are tracked where applicable.

For full batch tracking configuration and workflows, see Configure batch and expiry management.

Permissions

  • Moving stock between Store and Floor via adjustment requires the Add Adjustments action under Inventory at the center.
  • Enabling the Unify Store and Floor organization setting requires the Edit action under Inventory at the organization level.
  • Auditing Store and Floor separately requires the standard audit actions under Inventory; see Inventory permissions FAQ.

Troubleshooting

  • Floor quantity shows negative. A sale went through when Floor was already low and the Allow sale at any stock level setting is enabled. Run an adjustment to move stock from Store to Floor and investigate the sale sequence via the Stock ledger report.
  • Store quantity doesn't match physical count. Run an inventory audit at the center; reconciliation generates the adjustments needed to align the system value with the audited count.
  • Floor column is missing when you expect it. Check whether the organization has enabled Unify Store and Floor in Configure inventory settings; the column is hidden when the setting is on.
  • Adjustments don't balance. A store-to-floor movement requires a negative Storage Quantity and a matching positive Floor Quantity in the same adjustment. Entering only one side leaves the total stock off by the adjustment amount. See Adjust stock.
  • Conversion between Floor buckets is blocked. Your organization has Unify Store and Floor enabled. Conversions involving Floor quantities are not permitted when this setting is active. Contact Zenoti Support if the toggle is not accessible, or convert from Store quantities only.

For more troubleshooting pointers, see Inventory FAQ and Negative inventory FAQ.

Concepts

Workflows

Reports

Settings and troubleshooting

Was this article helpful?
Your feedback helps us improve our documentation.