Check out products
Audience: Center admin, inventory manager, store staff
Checkout deducts a consumable product from the center's On-Hand quantity so it can be used during a service, or β for legacy organizations on the Store/Floor model β moves a product from the storeroom to the floor so it can be sold, consumed, or transferred. Recording each checkout keeps inventory aligned with what is physically on the shelf and on the service area, and feeds the stock ledger and consumption reports.
Important: Organizations set up after the April 2020 release use the On-Hand quantity model β there is a single On-Hand quantity per product per center, and consumable checkout deducts directly from it. Organizations set up before April 2020 may still use the legacy Store/Floor model with separate storeroom and floor quantities. Customers on the legacy model can migrate to On-Hand by contacting Zenoti Support.
On this page
- Before you begin
- Admin settings that affect this workflow
- Open the Check Out page
- Fields on the Check Out page
- Check out a single product
- Check out products in bulk
- Batch-tracked products
- View checkout history
- Reverse or correct a checkout
- Troubleshooting
- What happens next
- Tips
- Related articles
Before you begin
Permission: Edit (under the Inventory security object) β required to record manual checkouts.
- You must be at the center level (not the org level) to access the Check out page.
- The product must exist in the center's catalog with a non-zero quantity, unless your org allows checkout when stock is not available β see the settings table below.
- For batch-tracked products, know which batch the units are coming from. Batches are listed sorted by nearest expiry date so you can select the appropriate batch; staff select the batch manually. See Batch-tracked products below.
- Editing a checkout is subject to a system constraint: checkouts older than 90 days cannot be edited. This is a system constraint, not a configurable setting.
Admin settings that affect this workflow
The following settings change how the Check Out page behaves. Each setting is configured in Set up essential inventory details (org-level) or in your center configuration (center-level overrides).
| Setting | Level | Effect |
|---|---|---|
| Allow product checkout, transfer, and conversion when stock is not available | Org | Lets you complete a checkout even when quantity is zero or insufficient. The system shows a low-stock warning but does not block the action. |
| Enable auto checkouts for consumable products | Org | Enables Appointment Product Consumption (APC) auto-checkout β Zenoti automatically records a checkout when a service that consumes the product is completed. When disabled, consumable checkout must be recorded manually on this page. |
| Manual checkout for consumption when checking out from store to floor (select 'Checkout for consumption by default') | Org | When enabled, the Checkout for consumption checkbox on the single-checkout form is selected by default for non-service consumables (for example, paper napkins). |
| Enable auto checkouts from store to floor for retail product sales | Org | Enables automatic checkout when a retail product is sold at the Point of Sale. When disabled, retail checkouts must be recorded manually on this page. |
| Enable auto checkouts from store to floor for product transfers | Org / Center | Enables automatic checkout when a product is transferred between centers. |
| Enable auto checkouts for product sales | Center | Center-level override for retail-sale auto-checkout. |
| Enable auto checkouts for consumable products | Center | Center-level override for the APC auto-checkout setting. |
Note: If your organization signed up after the April 2020 release, only Allow product checkout, transfer, and conversion when stock is not available is exposed in the UI. The remaining settings are enabled by default in the on-hand model and do not appear as configurable toggles.
Open the Check Out page
Both the single and bulk checkout procedures start from the same page.
Ensure that you are at the center level.
Based on whether you are checking out a retail or a consumable product, navigate to one of the following:
- Inventory > Retail > Check out
- Inventory > Consumable > Check out
The Check Out page opens with two tabs: CHECKOUT and BULK CHECKOUT.
Note: On the on-hand quantity model, only the Consumable > Check out path is available; the retail path is hidden because retail checkout is auto-handled at sale time.
Fields on the Check Out page
Both tabs draw on the same set of fields. The procedures below walk through them in order; this is the reference view.
| Field | What it does |
|---|---|
| Product | Search and select the product to check out. The available quantity appears beside the field once a product is chosen. |
| Quantity | The quantity to check out. It cannot exceed the available quantity unless your organization allows checkout at any stock level. |
| Checkout for consumption | Records the checkout as a consumption event rather than a stock movement. Visible only on the legacy store-and-floor model; see the table under Check out a single product for its default state per organization type. |
| Employee | The employee responsible for the checkout. Defaults to the logged-in user and can be changed β set it to the original provider when you are entering a checkout after the fact. |
| Comments | Free-text note for the checkout, such as a service ticket number or the reason for a sample. |
On the BULK CHECKOUT tab, products are added by scanning a barcode or typing a product code β each scan increments the quantity for that row β and each row carries its own quantity, comments, and a delete control.
If a field described here does not match what you see, contact Zenoti Support: field visibility on this page varies with the quantity model and the consumption setting.
Check out a single product
Use the CHECKOUT tab when you need to check out one product at a time and want to record a comment, a specific employee, or use the Checkout for consumption option for a non-service consumable.
Note: The CHECKOUT tab records one product per submission. To check out several products in one go, use Check out products in bulk.
On the CHECKOUT tab, enter the product name in the product search box.
The total quantity for the product appears next to the field.
(Legacy retail and consumable only) Select the Checkout for consumption checkbox if you want to move the product from storeroom to floor and immediately mark it as consumed. Use this for products that are not associated with any service (for example, paper napkins) but are still consumed at the center. Selecting it marks the product as consumed and reflects the change in inventory reports.
The visibility and default state of this checkbox depends on your org type and the Manual checkout for consumption setting:
Org type Checkbox visible? Default state What it does Legacy store-and-floor (signed up before April 2020) Yes Cleared When selected, the checkout is recorded as a consumption event in addition to a storeroom-to-floor movement. Legacy store-and-floor + Manual checkout for consumption enabled Yes Selected Same as above, but pre-selected to enforce consumption recording. On-hand (signed up after April 2020) No n/a β feature disabled in UI Consumption is recorded automatically; no manual checkbox is shown. In the Quantity box, enter the quantity to check out. The quantity must not exceed the available quantity unless Allow product checkout, transfer, and conversion when stock is not available is enabled.
Select the employee responsible for the checkout from the Employee field.
Note: The Employee field defaults to the logged-in user. Change it if a different employee is consuming or selling the product β for example, when entering a checkout that the original employee forgot to record.
In the Comments box, enter any notes for the checkout (for example, the service ticket number, or "sample for promotion event"). Comments appear in the checkout history.
Click Finish.
The checkout is recorded. If the product was out of stock and your org allows out-of-stock checkout, you receive a warning and the checkout still completes; otherwise the Finish button is blocked until you reduce the quantity or add stock.
Worked example
A provider used 2 units of a conditioning treatment during back-to-back services but forgot to record the checkout. A center admin opens Inventory > Consumable > Check out, searches for the conditioning treatment, enters Quantity: 2, changes the Employee field from their own name to the provider's name, and enters "Missed checkout β services on 2026-06-10" in Comments. Clicking Finish deducts 2 units from on-hand and records the provider's name against the transaction in the checkout history.
Check out products in bulk
The BULK CHECKOUT tab lets you scan or enter multiple product barcodes in one session and record them as a single checkout batch. Use this when you need to dispense many products across one staging step.
From the Open the Check Out page procedure, select the BULK CHECKOUT tab.
The bulk staging area appears with a Qty column, which is the total checkout quantity per product.
In the product code field, enter the product code or scan the product barcode.
Each scan of the same product increments the quantity for that product by one. You can also type the quantity directly in the Qty field for each product row.
(Optional) Enter notes that apply to every product in this bulk session in the Comments field.
Click Add.
An entry appears for the product in the Products section. The system shows the available quantity, total checkout quantity, and any out-of-stock count.
To add more products, repeat steps 2 through 4 for each product.
- If a scanned barcode is not recognized, the system shows an error β see Troubleshooting.
- If your org disallows out-of-stock checkout, products with insufficient stock are flagged and must be reduced or removed before you can finish.
To remove a product from the staging list, click the delete button next to the row.
After you finish adding products, click Finish.
The bulk checkout records all staged products in a single transaction.
Batch-tracked products
When a product has batch tracking enabled, the Check Out page displays available batches with their quantities and expiry dates so you can select the correct batch.
Follow the steps in Check out a single product or Check out products in bulk until you reach the product selection step.
For a batch-tracked product, the system displays the available batches with their quantities and expiry dates.
Select the batch or batches from which to deduct stock.
Batches are listed sorted by nearest expiry date β First Expiry First Out (FEFO) β to help you prioritize older stock. You must select the batch explicitly; the system does not automatically deduct from a batch without your selection.
Verify that the selected batch has sufficient quantity for the checkout amount.
Complete the remaining checkout fields and click Finish.
The system records the batch-level deduction and updates the batch's available quantity.
Note: If a transaction would cause any batch to go below zero quantity, the system blocks the checkout. Reduce the quantity or select a different batch with sufficient stock.
View checkout history
The History section on the Check Out page shows past checkouts so you can verify what was recorded.
Open the Check Out page.
Switch to the History section.
Filter by date or date range, and optionally by product type or search text.
Review the list β each row shows product, quantity, employee, comment, and timestamp.
Note: History on this page covers manual checkouts recorded from this surface. Auto-checkouts from Point of Sale sales, service consumption, and transfer dispatch appear in the Stock ledger report, not here.
Important: Checkouts older than 90 days cannot be edited. This is a system constraint. If you need to correct a checkout that is older than 90 days, use a stock adjustment β see Adjust stock.
Reverse or correct a checkout
Zenoti does not provide a direct "Undo" on the Check Out page. To reverse or correct a recorded checkout:
- Use a Stock adjustment with type Add to put the units back into inventory, with reason "Checkout correction" (or another pre-configured reason your org uses for reversals). See Adjust stock.
- Record a new checkout with the corrected quantity if needed.
This pattern preserves the audit trail β the original checkout, the adjustment, and the corrected checkout all appear in the stock ledger.
Note: Bulk adjustments via CSV import are not supported. Adjustments must be applied per product. There is no approval workflow for adjustments β users with the Edit Adjustments permission apply them directly.
Troubleshooting
| Issue | Likely cause and fix |
|---|---|
| Finish button is disabled. | Quantity exceeds available stock and your org disallows out-of-stock checkout, or a required field (Quantity, Employee) is empty. Reduce the quantity or fill missing fields. |
| Checkout fails with an out-of-stock error even though I see units on the floor. | On the legacy store-and-floor model, Check Out moves stock from storeroom to floor β units already on the floor cannot be checked out again. Verify the storeroom quantity in the Current stock report. |
| Scanned barcode is not recognized. | The product is not in the center's catalog, the barcode is not assigned, or the product is inactive. Verify in product settings and re-scan. |
| History section does not load any rows. | The selected date range has no recorded checkouts at this center, or the page failed to query the ledger. Widen the date range or refresh the page. |
| Quantity validation rejects a decimal. | Quantity is integer-only on Check Out. For partial-unit consumption (for example, 0.5 mL of a serum), use Adjustments instead β see Adjust stock. |
| The Checkout for consumption checkbox is not visible. | Either your org is on the on-hand quantity model (where the checkbox does not exist) or the Manual checkout for consumption setting is configured to hide it. See the admin settings table. |
| Batch selection dialog does not appear for a batch-tracked product. | The product may not have batch tracking enabled, or no batches have been received yet. Verify batch tracking is active for the product and that at least one batch exists with available quantity. |
| Checkout is blocked with a negative batch balance error. | The quantity you entered exceeds the available quantity in the selected batch. Select a different batch or reduce the quantity. |
| A checkout older than 90 days cannot be edited. | Editing checkouts beyond 90 days is a system constraint. Use a stock adjustment to correct the inventory balance β see Adjust stock. |
What happens next
- The product quantity is deducted from the center's on-hand quantity (on-hand model) or moved from storeroom to floor (legacy store-and-floor model).
- The stock ledger records the checkout β see Stock ledger report to verify the entry.
- If Checkout for consumption was selected, the consumption is reflected in the Cost of goods report and the consumption-tracking surfaces.
- If the product is batch-tracked, the deduction is recorded at the batch level and the batch's available quantity is updated accordingly.
Tips
- For high-volume daily floor stock-outs, use the BULK CHECKOUT tab with a barcode scanner β repeated scans increment quantity automatically, and you can also type quantities directly in each row.
- Use the Comments field to record disposition reasons β this makes the checkout history easier to audit.
- If your business operates on the on-hand quantity model, you do not need to record manual retail checkouts at all β sales and consumption auto-deduct from on-hand.
- To correct a wrong checkout, do not attempt to delete it β use a stock adjustment so the audit trail remains intact (see Reverse or correct a checkout).
- For batch-tracked products, review the expiry dates listed before selecting a batch to ensure you are consuming the oldest stock first.