Inventory FAQ
Answers to common questions about inventory management in Zenoti, covering product types, stock tracking, automatic ordering, purchase order operations, audits, reconciliation, permissions, and product kits.
Audience: Center admin, inventory manager
On this page
Product types and tracking
Purchasing and orders
- How does auto-PO generation work?
- How does Zenoti calculate recommended order quantities?
- Can I back-date a purchase order or audit?
Audits
- What happens when I enable partial audits?
- What is the difference between manual and auto reconciliation?
- Where can I find a reconciliation video walkthrough?
- What happens when I reject a reconciliation?
Purchase order troubleshooting
- Why can't I delete a purchase order?
- How do I change the status of a purchase order?
- Can I add products to a raised purchase order?
- Why is my PO showing a price difference during delivery?
- How do I copy a PO to a transfer order?
- What is the difference between PO statuses?
- What does "Partially delivered" mean on the orders listing?
Stock and product management
- How do I reset inventory for a center?
- How do I search for a product by barcode?
- How do I track tester or sample products?
- What happens when stock goes negative?
- How does the store and floor model work?
- How do I convert stock between retail and consumable?
- If I change a product's type, does Zenoti auto-convert existing stock?
- How do I set opening stock for a new center?
Audit troubleshooting
- Why can't I start a new audit?
- What are the value assignment methods for reconciliation?
- What options exist for products not counted during an audit?
- Can I import audit data from a spreadsheet?
Permissions and kits
- What permissions are needed for inventory operations?
- How do product kits (bundles) affect stock levels?
Before you begin
- You must have an active Zenoti inventory setup to use the features described in this article.
- Access to inventory operations requires appropriate permissions assigned by your organization's administrator through role-based security profiles.
- Some settings described here are configured at the organization level and may require your Zenoti administrator to enable them.
Permission: View Inventory Reports (under the Inventory Manager section of the security role) β Required to access inventory reports.
Product types and tracking
What is the difference between retail and consumable products?
Zenoti tracks two stock types for products:
- Retail products β Products sold directly to guests (for example, shampoo, skincare products). Retail stock decreases when a guest purchases the product at the point of sale.
- Consumable products β Products used internally during service delivery (for example, hair color, massage oil). Consumable stock decreases when a service provider checks out the product for use during an appointment.
A product can be marked as both retail and consumable. In this case, Zenoti tracks separate stock quantities for each type, and you can convert stock between the two types using the product conversion feature.
What is the on-hand quantity model?
The on-hand quantity model provides a comprehensive view of stock at each center. On-hand quantity is the total physical stock available, broken down into:
- Floor quantity β Stock on the sales floor or service area, available for immediate use or sale.
- Storage quantity β Stock in the back room or storage area.
The on-hand quantity model also tracks:
- Committed quantity β Stock reserved for pending orders or appointments.
- In-transit quantity β Stock being transferred between centers via transfer orders.
- Available quantity β On-hand minus committed and in-transit. This is the stock actually available for new transactions.
To learn more, see Switch to the on-hand quantity model.
Purchasing and orders
How does auto-PO generation work?
Auto-PO generation creates purchase orders automatically when product stock levels fall below configured thresholds:
- You configure alert levels for each product at each center: reorder minimum, optimum, default, and desired levels. Your organization may have renamed these headings β the underlying fields are Order, Desired, and Alert quantities.
- When the on-hand quantity for a product falls below its reorder minimum, the product appears in the auto-PO recommendation list.
- Navigate to Inventory > Orders to view the recommendations, grouped by vendor.
- The system calculates a recommended order quantity for each product.
- Select the products and click Create PO to generate purchase orders (one per vendor).
Auto-generated purchase orders are created in Created status. You still need to raise them (individually or in bulk) before they are sent to vendors.
To configure auto-ordering, see Configure automatic orders.
How does Zenoti calculate recommended order quantities?
The recommended order quantity uses the following formula:
Recommended Qty = Desired Level - (On-hand Qty + Undelivered Qty)
Where:
- Desired Level is the target stock level you configured for the product-center combination.
- On-hand Qty is the current physical stock at the center.
- Undelivered Qty is the quantity in raised purchase orders and transfer orders that have not yet been delivered (only included if the Consider raised purchase orders/transfer orders for calculating Auto PO/TO quantity setting is enabled).
If the result is zero or negative, the product does not need reordering.
Can I back-date a purchase order or audit?
Yes, with the appropriate permissions:
- Back-date a PO β Requires the PO_BACK_DATE permission under Inventory. Open the purchase order, click the edit icon on the date you need to change in the timeline near the top of the order, enter the new date with comments, and save. The system validates the date and logs the change.
- Back-date an audit β Requires the AUDIT_BACK_DATE permission. When editing an audit, you can change the audit date and add comments. You can only back-date to a date after the last reconciliation date.
Back-dating is subject to financial lock and edit lock restrictions. If your organization has enabled these locks, you cannot back-date beyond the locked period regardless of your permissions.
Audits
What happens when I enable partial audits?
When the Enable partial audit of products setting is active, you can audit a subset of products rather than counting your entire inventory. This is useful for:
- Cycle counting β Auditing one product category at a time on a rotating schedule.
- Spot checks β Counting specific high-value or high-risk products.
During a partial audit, only the products you count are included in the reconciliation. Products not counted retain their existing system quantities. After the partial audit is submitted, reconciliation compares the counted quantities against the system quantities for only those products.
What is the difference between manual and auto reconciliation?
After you submit an audit, Zenoti offers two reconciliation approaches:
- Manual reconciliation β You review the variances between audited and system quantities, adjust the reconciled quantities with reason codes, and submit the reconciliation. If approval is enabled and the variance exceeds the configured threshold, the reconciliation is sent for manager approval.
- Auto reconciliation β The system automatically applies the audited quantities as the new stock levels without manual review. Auto reconciliation is faster but provides less control over how discrepancies are handled.
Permission: Reconcile (under Inventory) β Required for manual reconciliation.
Permission: Approve Reconcile (under Inventory) β Required to approve reconciliations.
To configure reconciliation, see Set up audits.
Where can I find a reconciliation video walkthrough?
A quick video on reconciliation is available within the Zenoti help resources. You can watch it to understand how the reconciliation process works on Zenoti Web. For detailed instructions, read the complete help article on reconciliation.
What happens when I reject a reconciliation?
When you reject a reconciliation, the stock levels are not updated. The inventory manager must perform the audit and reconciliation again.
Purchase order troubleshooting
Why can't I delete a purchase order?
You can only delete a purchase order in Created status that has no deliveries recorded. Once a purchase order has been raised, partially delivered, or fully delivered, the delete option is disabled. Instead, close the purchase order to prevent further activity while preserving the audit trail. If the purchase order is in Created status but you still cannot delete it, check that you have the Edit permission under Inventory.
How do I change the status of a purchase order?
Purchase order statuses follow a one-way lifecycle: Created β Raised β Updated β Delivered β Reconciled. You cannot move a purchase order backward in the lifecycle (for example, from Raised back to Created). Orders being transferred between centers also pass through In transit.
Partially delivered is not a separate stored status. When you record a delivery for only part of an order, the order's stored status moves to Delivered and is shown as Partially delivered on the Manage procurement page for as long as quantity remains outstanding. That is why you can filter for it on the listing but will not find it as a stage in the lifecycle above. See What does "Partially delivered" mean on the orders listing? for a full explanation.
To advance:
- Created β Raised β Select the purchase order and click Raise (or use bulk raise for multiple purchase orders). This requires the RAISE_ORDER permission.
- Raised β Delivered β Click Deliver and enter delivery details. Recording a partial quantity also moves the order to Delivered, and it is shown as Partially delivered while quantity remains outstanding.
- Delivered β Reconciled β Click Close to finalize the purchase order. This step is permanent.
Can I add products to a raised purchase order?
Yes, if you have the EditPOLimitless permission under Inventory. Open the raised purchase order, search for the product, add it with the desired quantity, and save. With only the EditPOLimited permission, you can modify notes and shipping details but cannot add or remove line items.
Why is my PO showing a price difference during delivery?
When the delivery price differs from the purchase order price, Zenoti displays a price difference popup. This occurs when the vendor's actual invoice price does not match the purchase order line item price. You can click Update master prices to accept the actual delivery price and replace the existing master price with the new vendor price, or click Cancel to close the popup with no master-price change and proceed with the delivery at the original price. The price difference is tracked in the stock ledger for audit purposes.
How do I copy a PO to a transfer order?
Open the purchase order, go to the actions menu, and select Copy To Transfer. Choose whether your center is the transfer source or destination, select the other center, review the line items, and save. This option is only available when your organization has transfers enabled and the purchase order has not been partially delivered. See Manage Procurement for detailed steps.
What is the difference between PO statuses?
These are the stored status codes for a purchase order. The Manage procurement page can additionally display Partially delivered, which is how the Delivered status is displayed while quantity is still outstanding β it is not a separate stored status.
| Status | Description |
|---|---|
| Created | Purchase order has been drafted but not sent to the vendor. Can be edited freely or deleted. |
| Raised | Purchase order has been submitted to the vendor. Limited editing depending on permissions. |
| Updated | The order details have been modified after the initial recording β typically through a Modify Delivery action. |
| In transit | Applies to transfer orders moving between centers. |
| Delivered | Products have been received (partially or fully). Shown as Partially delivered on the listing while quantity remains outstanding. |
| Reconciled | Purchase order is finalized. No further modifications or deliveries are possible. |
What does "Partially delivered" mean on the orders listing?
Partially delivered is how the Delivered status is displayed on the Manage procurement page when some β but not all β of the ordered quantity has been received.
When you record a delivery for only part of a purchase order's quantity, the order's stored status moves to Delivered immediately. Recording a partial quantity also moves the order to Delivered, and it is shown as Partially delivered while quantity remains outstanding. You can filter for Partially delivered on the listing page to find these orders quickly.
Once the remaining quantity is received and the order is fully delivered, the listing no longer shows Partially delivered β the order continues to display as Delivered until it is reconciled.
Note: There is no separate "Partially delivered" stored status. The distinction exists only in how the Delivered status is displayed on the listing when outstanding quantity remains.
Stock and product management
How do I reset inventory for a center?
To reset inventory quantities for a center, perform a full physical audit:
- Navigate to Inventory > Audits and create a new audit.
- Count all products and enter the actual physical quantities.
- Submit the audit and complete reconciliation.
The reconciliation process sets stock to match your physical counts, effectively resetting inventory. There is no "reset to zero" button β the audit workflow is the controlled method for correcting stock levels.
How do I search for a product by barcode?
Navigate to Inventory > Products and enter the barcode number in the Search field. The search matches against the primary barcode and any additional barcodes assigned to products. You can also use a barcode scanner β focus the search field and scan the barcode to auto-populate the search.
How do I track tester or sample products?
Create tester and sample products as separate product entries with their own product codes. Mark them as Consumable (not Retail) since they are used for demonstrations, not sold. Track their stock separately from the saleable versions. For Aveda products, the system recognizes "T" prefix product codes as tester products and "BB" prefix as BackBar products, routing them appropriately.
What happens when stock goes negative?
When more stock is consumed or sold than available on hand, the product's stock quantity drops below zero. Zenoti allows this to prevent blocking point-of-sale transactions. However, negative stock affects cost calculations β when a subsequent purchase order delivery brings stock from negative to positive, the system applies a First In First Out (FIFO) correction that resets the average cost to the incoming lot price (reflected in the Offset column of the Cost of Goods report). To avoid negative stock issues, configure reorder alerts and run audits regularly. See Negative inventory FAQ for more details.
How does the store and floor model work?
Zenoti tracks inventory at two locations within each center:
- Store (back storage/warehouse) β Products are received here from purchase order deliveries and transfers.
- Floor (treatment rooms/display areas) β Products moved to customer-facing locations for use or sale.
Stock can be moved between store and floor within a center. If your organization prefers a simplified model, enable the Unify Store and Floor setting in Inventory Settings to combine both into a single quantity.
How do I convert stock between retail and consumable?
- Navigate to Inventory > Retail (or Consumable) > Convert.
- Select the product to convert.
- Enter the quantity to convert and select the direction (Retail β Consumable or Consumable β Retail).
- Save the conversion.
The system creates paired transactions β an outflow from the source type and an inflow to the target type. Both the source and destination quantities must remain non-negative after conversion.
If I change a product's type, does Zenoti auto-convert existing stock?
No. Changing a product's type (retail β consumable) on the product master record does not automatically convert existing stock. Zenoti shows a warning when you change the type, prompting you to run a manual conversion afterward so that the stock balances reflect the new classification.
Use Inventory > Retail (or Consumable) > Convert to manually move stock between types, as described in the previous FAQ. The Enable product conversions organization setting must be on for the Convert menu to be available β see Set up stock actions.
How do I set opening stock for a new center?
- Navigate to Inventory > Retail (or Consumable) > Opening Stock.
- Select the center and add products with their initial quantities.
- Enter batch details if batch tracking is enabled for any products.
- Save the opening stock entry.
Opening stock is typically used once when a new center goes live. After the initial entry, all stock changes flow through normal channels (purchase order deliveries, transfers, adjustments, audits).
Audit troubleshooting
Why can't I start a new audit?
You cannot create a new audit if there is already a pending (un-submitted) audit for the center. Complete or delete the existing audit first. Check Inventory > Retail > Audit (or Consumable > Audit) to see if a draft audit exists. You also need the Edit permission under Inventory to create audits.
What are the value assignment methods for reconciliation?
During reconciliation, you can choose how Zenoti assigns values to the audited quantities:
- Sale price β Value stock at the current sale price.
- Purchase price β Value stock at the configured purchase price.
- Last procured cost β Value stock at the most recent purchase order delivery price.
- Average cost β Value stock at the perpetual weighted average cost.
- FIFO cost β Value stock using First In First Out (FIFO) costing.
- Custom β Manually enter a value for each product.
The method you choose affects the stock value recorded after reconciliation.
What options exist for products not counted during an audit?
When running a partial audit (not counting every product), you can configure how the system handles uncounted products:
- Keep existing quantity β Products not counted retain their current system quantity (default for partial audits).
- Set to zero β Products not counted are set to zero stock. Use this only for full audits where any uncounted product truly has no stock.
- Flag for review β Products not counted are flagged for follow-up but quantities are not changed.
- Exclude from reconciliation β Uncounted products are excluded from the reconciliation calculation entirely.
To configure this behavior, see Set up audits.
Can I import audit data from a spreadsheet?
Yes. Navigate to Inventory > Audits and select the Import option. Download the import template, fill in the product codes and physical count quantities, and upload the completed file. Zenoti validates the data before importing and reports any errors. This is useful for large audits where staff record counts on paper or handheld devices first.
For detailed import steps, see Import and export inventory data.
Permissions and kits
What permissions are needed for inventory operations?
The following table summarizes the key permissions for inventory operations:
| Permission | Security section | Description |
|---|---|---|
| Add | Inventory | Create purchase orders and transfer orders |
| Edit | Inventory | Edit orders, receive deliveries, process stock operations |
| InvList (rendered with its raw name) | Inventory | View the inventory product list |
| RAISE_ORDER | Inventory | Raise purchase orders (change status from Created to Raised) |
| EditPOLimited | Inventory | Limited editing of raised purchase order details |
| EditPOLimitless | Inventory | Full editing of raised purchase order details including line items |
| PO_BACK_DATE | Inventory | Back-date a purchase order |
| AUDIT_BACK_DATE | Inventory | Back-date an audit |
| Reconcile | Inventory | Submit reconciliation after audit |
| Approve Reconcile | Inventory | Approve reconciliation when approval workflow is enabled |
| Add Adjustments | Inventory | Create stock adjustments |
| Edit Adjustments | Inventory | Edit existing stock adjustments |
| Delete Adjustments | Inventory | Delete stock adjustments |
| Hide Price | Inventory | Prevents user from viewing stock prices and values |
| ImportProduct | Import/Export | Import products from Excel/CSV |
| ExportProduct | Import/Export | Export product data |
| ImportVendor | Import/Export | Import vendors from Excel/CSV |
| ExportVendor | Import/Export | Export vendor data |
| Stock Ledger Report | Inventory (group in the Reports(V2) section) | Access the stock ledger report |
| Inventory Aging Report | Inventory (group in the Reports(V2) section) | Access the inventory aging report |
Your Zenoti administrator assigns these permissions through role-based security profiles. The Admin/Manager role profile includes most inventory permissions by default. The Inventory Manager role profile is a specialized role with full inventory access.
How do product kits (bundles) affect stock levels?
Product kits (also called bundles in some interfaces) are composite products that contain multiple component products. When you bundle or unbundle:
- Bundle (assemble) β The system deducts the component product quantities from stock and adds the kit product quantity. For example, bundling 1 "Gift Set" deducts 1 Shampoo, 1 Conditioner, and 1 Serum from stock, and adds 1 Gift Set.
- Unbundle (disassemble) β The reverse. The system deducts the kit product quantity and adds the component quantities back to stock. The Un-Bundle button initiates this action.
The system validates that sufficient component stock exists before allowing a bundle operation. If any component has insufficient stock, the bundle operation is blocked.
To learn more, see Product Kit Management.