Inventory audit and physical count
Audience: Inventory managers, store managers, and staff responsible for performing physical stock counts at a center.
A stock audit is the physical count of every product on the floor and in the storeroom at a center. Run audits to verify on-hand quantities against system records, identify shrinkage from theft, damage, or miscounting, and produce data for downstream reconciliation. This article covers audit creation, every counting method (manual, barcode, partial, import), draft management, and submission. Once you submit, the audit moves to Reconciliation and approval for variance review and stock update.
On this page
- Roles in the audit and reconciliation process
- Actual, expected, and deviation
- Stock count process overview
- Before you begin
- Field labels: Floor / Storage vs. On-Hand
- Audit types
- Methods to enter audit data
- Submit the audit
- Manage draft audits
- Back-date an audit
- View audit history
- Tips
- Troubleshooting
- What happens next
- Related articles
Roles in the audit and reconciliation process
Three roles work together to complete an audit cycle. Your administrator assigns the corresponding permissions to each role's user accounts.
| Role | Responsibility | Required permissions |
|---|---|---|
| Auditor | Counts products on the floor and in storage; submits the audit. | Add and Edit under Inventory (perform and edit audits); AUDIT_BACK_DATE under Inventory (only if back-dating audits to a prior date). |
| Reconciler | Reviews variances between audited and expected quantities; submits reconciliation. | Reconcile under Inventory. |
| Approver | Approves or rejects reconciliations whose value variance exceeds the configured threshold. | Approve Reconcile under Inventory, plus the org-level setting Make it mandatory to get approval to reconcile the difference between the expected and the audited stock value (see Reconciliation and approval). |
A single user MAY hold more than one role if their permission set allows it; in smaller organizations the same user often performs all three. In organizations with stricter segregation-of-duties, the three roles are assigned to different users.
Actual, expected, and deviation
Each audited product has three quantity values:
- Actual β the physical count entered during the audit.
- Expected (or projected) β the quantity the system computed from recorded transactions (purchases, transfers, consumption, conversions, returns, kit operations, prior reconciliations).
- Deviation β the difference between Actual and Expected.
Zenoti color-codes deviations during reconciliation: Red for missing products (physical count is less than expected β likely theft, damage, or miscount), Green for missing orders (physical count is more than expected β likely an unrecorded inflow). Red deviations are the most critical and typically warrant deeper review.
A deviation in quantity translates directly into a deviation in stock value. Whether a reconciliation requires manager approval depends on whether the value variance exceeds the org's configured threshold (see Reconciliation and approval).
Stock count process overview
- The Auditor counts every active, in-stock product physically. Counted products are flagged Manually Audited. Out-of-stock, inactive, or non-tracked products that the Auditor does not count are flagged Unaudited Products. The Auditor chooses how unaudited products are valued (see Valuation methods).
- After Submit, the Reconciler reviews variances and either applies the audit (auto-reconciliation) or submits the reconciliation for approval if the org has enabled threshold-based approval.
- The Approver approves or rejects the reconciliation. Approval applies the new stock levels; rejection returns the reconciliation to the original auditor for re-audit and re-reconciliation.
Before you begin
You need:
Permission: Add and Edit under Inventory β required to create and submit audits.
Permission: AUDIT_BACK_DATE under Inventory β required only if you need to record an audit with a date in the past.
Prerequisites:
- No pending (unsubmitted) audit exists for the center for the same audit type. Only one audit per center per audit type (retail or consumable; one combined audit when unified audit mode is enabled) may be open at a time. A draft audit IS a pending audit. If a draft already exists for the audit type you want to run, either resume and submit it, or delete it before starting a new one. (To import data INTO an existing in-progress audit instead of starting a new one, see Import and export inventory data.)
- On Zenoti Mobile App (ZMA), this prerequisite is stricter: you cannot start a new audit until all open audits for the center have been reconciled, not merely submitted. This restriction does not apply when working on web.
- Decide whether to perform a full audit (every product), a partial audit / cycle count (a subset by category, vendor, or manual selection β requires the Enable partial audit of products organization setting), or a unified audit (both retail and consumable products in one session β requires the unified audit mode to be configured for your organization).
Field labels: Floor / Storage vs. On-Hand
The audit form's quantity fields and the audit grid's columns surface different labels depending on the org-level Unify Store and Floor setting. When you read steps below referring to "On Hand Quantity" or "Qty In Store / Qty In Floor", check which view your organization uses:
Unify Store and Floor setting |
Audit form fields | Audit grid columns |
|---|---|---|
| ON (default for organizations onboarded after April 2020) | On Hand Quantity (single combined input) | On Hand Quantity (single combined column) |
| OFF (legacy default for organizations onboarded before April 2020) | Floor quantity + Storage quantity (two separate inputs) | Qty In Store + Qty In Floor (two separate columns) |
Note: The store/floor split appears on the audit grid and on legacy screens only β the modern (V2) stock reports such as Current Stock and Stock Ledger report a single stock quantity and carry no Store/Floor breakdown columns.
Both UIs map to the same underlying stock model (the system tracks Floor and Storage separately regardless of the toggle). Steps below use the term the quantity field(s) when the step applies to either UI.
Audit types
Three audit types are available. The type you select determines which products appear in the audit product list.
| Audit type | Products included | How to navigate |
|---|---|---|
| Retail audit | Retail-type products only. A consumable product will not appear in a retail audit. | Inventory > Retail > Audit |
| Consumable audit | Consumable-type products only. A retail product will not appear in a consumable audit. | Inventory > Consumable > Audit |
| Unified audit | Both retail and consumable products in a single session. Available only when your organization has unified audit mode configured. | Inventory > Audit |
Availability: Unified audit requires unified audit mode to be configured for your organization. It is not a setting you turn on yourself β if the unified Inventory > Audit path is not present, your organization runs separate retail and consumable audits.
Note: A product that appears in stock reports but is absent from the audit product list is either a different product type than the audit selected, or it is inactive at the center. Deactivated products at a center are excluded from the audit product list regardless of audit type.
Methods to enter audit data
You can combine methods in a single audit session β for example, scan most products with a barcode scanner, then manually enter counts for the few that scan failed.
Method 1: Scan products with a barcode scanner
Each product must have an assigned barcode. The scanner matches the scanned code against each product's primary barcode. Barcode scanning is an optional capability that depends on your center's hardware setup β manual entry is always available as an alternative.
Availability: Barcode scanning during audits is enabled by default for most organizations. If the Scan product option does not appear, contact your administrator.
At the center level, go to Inventory.
Navigate to the audit page:
- For retail: Inventory > Retail > Audit.
- For consumables: Inventory > Consumable > Audit.
- For a unified audit (when available): Inventory > Audit.
Select Scan product to start the scanner. The scanner emits a beep or light when a barcode is captured.
Scan the product's barcode. If you have several units of the same product, scan it once and then enter the total quantity in the relevant quantity field. Scanning the same barcode multiple times may increment the quantity automatically, depending on your organization's configuration.
Note: If the product you scan is defined as both retail and consumable, the scan dialog asks you to specify a default type for the scanned row.
(Optional) Add notes for the Reconciler in the Comments field.
After scanning every product, submit the audit.
If the scanner reads a code that does not match any product, a product not found message appears. You can download a list of scanned products at any time using Download list.
Method 2: Enter counts manually
- At the center level, go to Inventory.
- Navigate to:
- For retail: Inventory > Retail > Audit.
- For consumables: Inventory > Consumable > Audit.
- For a unified audit (when available): Inventory > Audit.
- Search for products. Use the available filters (Category, Brand, Vendor, and, where batch tracking is enabled, Batch) to load products into the audit grid.
- Enter the physical count in the quantity field(s) (per Field labels). Negative values are not allowed.
- For batch-tracked products, select the batch icon next to the product, then enter counts per batch (batch number, remaining quantity, expiry date if prompted). See Batch / lot tracking for the batch model.
- Repeat for every product you are counting in this session.
- Add notes for the Reconciler in the Comments field if needed.
- Either save a draft to continue later, or submit the audit when all counts are entered.
Worked example: The auditor at the downtown center counts Lavender Shampoo 250 ml (product code LAV-250). They find 6 units on the retail shelf and 18 units in the back room, so they enter 6 in Floor quantity and 18 in Storage quantity (or 24 in On Hand Quantity if the organization uses the unified view). The system's projected quantity is 26, so the audit will show a deviation of β2 units β at a Perpetual Average value of $12.50 per unit, that is a $25.00 value deviation for the Reconciler to review. The auditor adds a note "Two units unaccounted for β possible tester usage" and saves the draft.
Method 3: Conduct a partial audit (cycle count)
A partial audit covers a subset of products rather than full inventory. Run partial audits on a rotating schedule to cover all products over time without disrupting operations. A partial audit cannot be combined with a full audit in the same session β when you start an audit, you either count every product or you count only the subset you select below. Multiple partial audits can be submitted for a center; reconciliation is performed across all open (submitted) audits in one step.
Availability: Requires the org-level Enable partial audit of products setting. Available on web only β this option is not supported on ZMA.
Important: Once your organization enables Enable partial audit of products, the setting cannot be turned off. Confirm with your administrator before enabling it in Configuration > Inventory > Audits.
- At the center level, go to Inventory > Retail > Audit (or Consumable > Audit, or Audit for a unified audit).
- Choose the subset of products to audit using the available filters β Category, Brand, Vendor, Product Type, and (where batch tracking is enabled) Batch β or manually enter counts for chosen products from the full list.
- Enter counts for the selected products only. Unaudited products retain their current system quantities.
- In the Auditing Options section, select Submit only above products.
- Select Submit Audit.
- A summary pop-up displays the products and counts. Confirm and select Save and Submit.
Method 4: Import audit data from a spreadsheet
For retail-heavy centers, exporting an audit template, having staff fill it on paper or laptop, and then importing the completed file is faster than scanning. The import step requires an audit to already be in progress for the center β see Import and export inventory data for the full procedure.
Submit the audit
After all counts are entered (or after you complete a partial audit selection), submit the audit to start reconciliation processing.
Make sure you are at the center level.
Note: You submit a stock count for all retail or all consumable products in one operation, or both at once if unified audit mode is enabled. You cannot submit per-product.
Go to Inventory > Retail > Audit (or Consumable > Audit, or Audit for a unified audit).
Verify the entered quantities.
In the Auditing Options section, choose how to handle products you did not physically count (see Handling unaudited products below).
For products that will be valued by the audit, select a valuation method.
Select Submit Audit. A confirmation pop-up appears with a summary of the submission:
- No. of Audited Products β Products for which you entered a count.
- No. of Products Not Audited β Products for which no count was entered.
- Total No. of Products β Total products active at the center.
- Total Products Being Submitted β Products included in this submission, based on your selection in step 4.
Confirm the summary and select Save and Submit.
After submit, a confirmation message appears β for example, "Retail was submitted successfully." β and you are returned to the Inventory home page. (For one partial-audit mode, the screen stays and the product list reloads instead of redirecting.) The audit is now available to the Reconciler in the Reconciliation and approval workflow.
Note: Submitting an audit does not automatically reconcile it. Reconciliation is a separate subsequent step performed by the Reconciler.
Handling unaudited products
The Auditing Options section on the submission screen exposes choices for how products you did not physically count are treated. The choice determines what quantity goes into the submission for those products.
| Option | What it does | When to use |
|---|---|---|
| Submit only above products | Submits only the products you counted. Unaudited products are not included in this audit. | Partial audits (cycle counts) β you intentionally audit a subset and leave the rest alone until their cycle comes around. |
| Use projected stock values for unaudited products β negative stock would be considered as no stock | Submits unaudited products using Zenoti's projected (system-expected) quantities. Any projection that came out negative is treated as zero. | Full audits when you trust the system projections for unaudited items and want negative balances cleaned up. |
| Use projected stock values for unaudited products β negative stock would be maintained | Submits unaudited products using Zenoti's projected quantities, keeping negative balances as negative. | Full audits when you want negatives preserved as a signal (so they appear on reports for investigation). |
| Use zero stock values for unaudited products | Submits unaudited products with quantity set to zero, regardless of their projected value. | Full audits when unaudited products should be treated as missing β for example, a fresh-start count at a new center. |
Note: The Use zero stock values for unaudited products option can be hidden by the org-level setting Hide the option to use zero stock values for unaudited products under product audits (configured in Configuration > Inventory > Audits). When that setting is enabled, the option does not appear on the submission screen, and auditors must choose Submit only above products or one of the projected-stock options for unaudited rows. Enable that setting when you want auditors to investigate missing products instead of zeroing them.
Valuation methods for unaudited products
When you submit an audit, Zenoti applies a value to the on-hand quantities of products you did not physically count (Unaudited Products). For each product, the audit records the counted quantities together with the Value considered and the valuation method used. Choose the method that best fits your business:
| Method | When to use |
|---|---|
| Perpetual Average | Default. The running weighted average cost across all transactions on the product. Best for stable, long-running products with consistent costs. |
| 3 - Month Average | Average cost over the most recent 3 months of transactions. Use when costs have shifted in the last quarter and you want a recent-but-smoothed view. |
| Last Purchase Price | The latest purchase price of the product. Use when costs have changed significantly since the last full audit (e.g., post-vendor price increase). |
| Non-Zero Perpetual Average | The most recent positive perpetual average value. Use when products have had zero or negative perpetual-average values in their history. |
| Vendor Purchase Price | The purchase price configured on the product master. Use when you trust the master price more than transaction history (e.g., new product with limited transaction data). |
| Custom | You enter a value per product or apply one across all unaudited products. Use for one-off adjustments. Important: if you select Custom but leave the field empty, the system silently falls back to the Perpetual Average value β explicitly enter a value to avoid surprises. |
Note: Your organization can restrict this choice. When the org-level Restrict editing of values in audit setting is enabled together with a Select default value for audit choice, the audit screen shows only the pre-selected valuation method, and auditors cannot change it β both are configured in Configuration > Inventory > Audits.
When you add stock through an audit, the selected valuation method applies. When stock is removed during an audit (audit count is less than expected), the Perpetual Average value applies regardless of the method you chose.
Manage draft audits
Save a draft
A draft audit lets you spread data entry across days or sessions. The draft IS a pending audit β only one draft per center per audit type can exist at any time.
- After entering counts, select Save Changes (also labeled Save Draft in some views β both perform the same persistence operation and do not create or commit a final record).
- The system persists your entries. You can return later to the same audit page and continue entering counts.
- When ready, submit the audit.
Note: Because a draft is a pending audit, you cannot start a second audit of the same type for the same center until you submit or delete the existing draft. To audit a different center concurrently, switch to that center first.
Delete a pending audit
Use this to discard a draft you no longer want to submit. Only unsubmitted (pending) audits can be deleted.
- Go to Inventory > Retail > Audit (or Consumable > Audit).
- If a pending audit exists, select Delete.
- Confirm the deletion. The audit is removed and you can start a fresh audit for the center.
Back-date an audit
Record an audit against a past date when you discover the count belongs to an earlier business period.
- Before submitting, select the Audit date field on the audit page and change it to the desired past date.
- A comments dialog appears β enter comments explaining the reason for back-dating. Comments are mandatory for back-dated audits.
- Submit the audit.
Note: Back-dating is governed by the AUDIT_BACK_DATE permission under Inventory. The system records the back-dated date, the comments you entered, and which user performed the back-dating. Future dates are not permitted. The cadence recommendation in Tips β that you conduct a stock count every 3 months β refers to actual count cadence, not back-dated entries.
View audit history
Permission: Audit History under View Inventory Reports β required to open the Audit History report.
- Navigate to Reports > Inventory > Audit History.
- Review completed audits with these columns:
- Audit date and time
- Audit type (retail, consumable, unified)
- Audit source (web, mobile, API, import)
- Auditor user
- Audited and reconciled quantities, and the deviation
- The Audit History report supports filtering by center, date range, and audit source. Audit-driven adjustments also appear in the Stock Ledger report (see Inventory reports) for full traceability.
Tips
- Cadence: Conduct a separate stock count for retail products and for consumables at least once every 3 months. Frequent counts catch shrinkage early and keep Perpetual Average Cost calculations accurate. The cadence also keeps reports available. The Current stock report loads no matter when you last counted. The legacy Current stock screen and the legacy Inventory Value, Product Consumption and Inventory Alerts reports will not load at a center once 92 days have passed since that center's last completed count of the product type.
- Off-peak timing: Run audits during low-traffic hours to minimize counting disruption.
- Cycle counting for large inventories: For centers with hundreds of stock keeping units (SKUs), run partial audits (Method 3) on a rotating schedule rather than full audits.
- Mobile: Use Zenoti Mobile or a barcode scanner to audit on the go without needing to take products off the shelf. Note that partial audits are not supported on ZMA β use the web interface for cycle counting.
- Pending deliveries: If you are mid-receipt of a vendor order, save the count as a draft, receive the order, then add the new on-hand quantities and submit.
- Inactive or out-of-stock products: Use Zenoti's projections (a valuation method) and submit a partial stock count rather than skipping these products.
Troubleshooting
| Symptom | Likely cause | What to try |
|---|---|---|
| Submit Audit button is greyed out | Unaudited Products list still has products without an assigned valuation method. | Select a valuation method (per Valuation methods) for unaudited products before submitting. |
| Partial-audit option is missing | The Enable partial audit of products organization setting is not enabled, or you are using ZMA (partial audit is web-only). | Ask your admin to enable the Enable partial audit of products setting in the org-level inventory settings under Configuration > Inventory > Audits. |
| A product you tried to count is not in the list | Product is inactive at this center, is a different product type than the audit type selected, or has not been added to the product catalog. | Ask your admin to activate the product at the center and confirm its product type (retail or consumable) matches the audit type you are running. |
| Reconciler does not see the submitted audit | Audit was saved as a draft, not submitted. | Resume the audit and submit. Drafts do not appear in the Reconciler view. |
| Approver did not receive a notification for a pending reconciliation | Approver lacks the Approve Reconcile permission, or the org-level approval threshold setting is not configured. | Verify the Approver has Approve Reconcile under Inventory, and check the Make it mandatory to get approval to reconcile the difference between the expected and the audited stock value setting per Reconciliation and approval. |
| Import file rejected for negative values | Negative values are not allowed in audit data. | Re-export the template, ensure all entries are zero or positive, and re-import. Note: if you accidentally enter a negative value, Zenoti ignores the minus sign and imports the value as positive. |
| Barcode scan returns "product not found" | Scanned code does not match any product's primary barcode. | Update the product's primary barcode in product management, or scan a different barcode that is assigned to the product. Use Download list to review scanned products and identify offending codes. |
| Valuation method field is locked to one option | The org-level Restrict editing of values in audit setting is enabled with a Select default value for audit choice configured. | This is expected behavior. Ask your admin to review the Select default value for audit setting in Configuration > Inventory > Audits if a different method is needed. |
What happens next
After you submit the audit, the workflow moves to Reconciliation and approval. The Reconciler reviews variances and either auto-applies the audit or submits the reconciliation for manager approval, depending on org configuration.
Video: Perform an Audit (6:23) β Complete walk-through of performing a stock audit.
Changes applied in this pass:
- Removed the partial-audit side-effect claim (Method 3) β the note asserting that an open partial audit forces Perpetual Average Cost rendering for unaudited products on the Current Stock and Inventory Aging reports. The updated requirement states this has no code support and must not be claimed.
- Added an Availability callout for unified audit under the audit types table, disclosing the gate without describing a toggle the reader can flip.
- Reordered the Field labels table so the current On-Hand model leads and the legacy Store-and-Floor row follows.
- Added the dual-type scan note to Method 1 (products defined as both retail and consumable prompt for a default type in the scan dialog).
- Added the Audit History permission callout, rendered as Audit History under View Inventory Reports.
All other sections, tables, rows, and wording are preserved unchanged, including the five verbatim-locked strings.