ZenotiHelp

Vendor Email Recipient Confirmation Panel

ZTZenoti Docs Team Updated October 27, 2026 7 min readGuide

Audience: Center admin, inventory manager, front desk staff who raise and email purchase orders to vendors.


On this page


Before you email a purchase order (PO) to a vendor, Zenoti displays a recipient confirmation panel β€” a slide-in overlay β€” showing every email address the order will be sent to. This prevents accidental sends to outdated addresses and lets you verify that all vendor contacts are included before the email is dispatched. For supported vendor integrations β€” Aveda and NeillCorp β€” the order detail page also provides a direct send button so Zenoti can submit the purchase order electronically to the vendor's ordering system.

Before you begin

  • Your center must have at least one purchase order in Created status.

  • Vendor email addresses must be configured on the vendor record. If the primary email is missing, the panel surfaces the gap before sending.

  • You need the following permissions:

    Permission: Add under Inventory, in the Inventory Manager section of the security role β€” required to raise purchase orders and trigger the email send workflow.

    Permission: Add under Products, in the Inventory Manager section of the security role β€” required to view and work with inventory products associated with the order.

    Permission: Add under Vendors, in the Inventory Manager section of the security role β€” required to view vendor contact details, including additional email addresses, in the recipient list.

    Permission: Orders under View Inventory Reports, in the Inventory Manager section of the security role β€” required only if you want to review raised and emailed orders in the Inventory Orders report afterward.

How the recipient confirmation panel works

When you choose to raise and email a purchase order, Zenoti does not send the email immediately. Instead, it opens the recipient confirmation panel so you can verify the full list of recipients before confirming.

The panel shows:

  • "Email to vendor" β€” the panel title.
  • "This order will be sent to:" β€” an introductory line followed by the complete list of email addresses.
  • The total recipient count.
  • Each individual email address that will receive the order, including the vendor's primary email and any additional vendor email addresses configured on the vendor record.

You must confirm the recipients before Zenoti dispatches the email. If no email address is configured for a vendor, the panel surfaces a prompt to enter the missing address before you can proceed.

In addition to the email workflow, Zenoti supports electronic order submission for Aveda and NeillCorp directly from the purchase order detail page. Each integration displays its own send button on raised or updated non-return purchase orders when the relevant integration is enabled for your organization and the current center is authorized. The integration status column on the orders listing (Inventory > Orders) becomes visible whenever any vendor ordering integration is active for your organization, allowing you to track external order status at a glance.

Steps

Review and confirm recipients for a single purchase order

Use this procedure when you are emailing one purchase order directly from the order detail page.

  1. Navigate to Inventory > Orders.

  2. Locate the purchase order you want to send and open it.

  3. On the order detail page, select the option to raise and email the order to the vendor.

  4. The Email to vendor panel slides in, displaying "This order will be sent to:" followed by the recipient list.

    Review the list:

    • Recipient count β€” Verify the total number of addresses shown matches your expectation.
    • Individual addresses β€” Confirm that the vendor's primary email and any additional email addresses are correct.
  5. If an email address is missing or incorrect, close the panel and update the vendor record before retrying.

  6. When the recipient list is correct, select Send.

    Zenoti dispatches the purchase order email to all listed addresses.

Review and confirm recipients for a bulk raise-and-email operation

Use this procedure when you are raising and emailing multiple purchase orders at once from the orders listing page.

  1. Navigate to Inventory > Orders.

  2. On the orders listing, select the purchase orders you want to raise and email.

    Important: All selected orders must be in Created status. Zenoti displays a validation message β€” "Selected orders must be in created status" β€” if any selected order does not meet this requirement.

  3. Select Raise & email from the available actions.

  4. If any selected vendor does not have an email address configured, Zenoti displays the prompt "Enter missing vendor emails". Enter the missing addresses before continuing.

  5. The recipient confirmation panel opens for the bulk operation. The panel groups recipients by vendor, with one expandable row per vendor.

    Review each vendor row:

    • Vendor name β€” Confirm you are sending to the correct vendor.
    • Recipient addresses β€” Expand each row to view the individual email addresses, including any additional vendor email addresses beyond the primary.
  6. If any address is incorrect, select Cancel to close the panel, correct the vendor record, and retry the bulk operation.

  7. When all recipient lists are correct, select Send.

    Zenoti dispatches the purchase order emails to all vendors simultaneously, with each vendor receiving only their own order.

Tip: The bulk confirmation panel also displays the total recipient count and a grouped summary line β€” "These orders will be sent to:" β€” before the per-vendor rows, giving you a single-glance overview before you confirm.

Tips

  • Keep vendor email addresses current. The recipient confirmation panel draws addresses directly from the vendor record. If a vendor changes their contact details, update the record before your next order cycle so the panel reflects accurate recipients.

  • Add additional vendor contacts proactively. If a vendor has multiple contacts who should receive purchase orders β€” such as an accounts team and a warehouse team β€” add those addresses as additional vendor email addresses on the vendor record. They will appear automatically in the recipient confirmation panel for every order sent to that vendor.

  • Use bulk raise-and-email for end-of-period replenishment. When processing multiple orders at the end of a replenishment cycle, the bulk variant of the confirmation panel groups all vendor recipients in a single review step, reducing the time spent confirming each order individually.

  • Check the email send history after dispatching. After sending, you can review the Vendor Email History on the order detail page to confirm delivery status and see a record of when each email was sent.

Troubleshooting

The Send button is unavailable or the panel does not open.

The order may not be in a valid state for emailing. Verify that the purchase order is in Created status. Orders in Delivered or Reconciled status cannot be raised or emailed. If the order status is correct, confirm you have the Add permission under Inventory β€” without it, the raise-and-email action is not available.

The "Send to Aveda" button is missing or greyed out on the purchase order.

Send to Aveda is independent of the vendor email workflow described in this article. The vendor's email address has no effect on it: adding, correcting, or removing an email address on the vendor record will not change whether the button appears or is available, and confirming recipients in the Email to vendor panel does not send the order to Aveda. For the causes and how to resolve them, see the Send to Aveda row in the troubleshooting section of Configure vendor catalog integration.

The recipient confirmation panel shows no email addresses for a vendor.

The vendor record does not have an email address configured. Zenoti surfaces the prompt "Enter missing vendor emails" before opening the panel. Enter the vendor's email address directly in the prompt, or navigate to the vendor record and add the address there before retrying.

The bulk operation shows the validation message "Selected orders must be in created status."

One or more of the selected orders has already been raised, delivered, or reconciled. Deselect the orders that are not in Created status and retry with only the eligible orders.

Additional vendor email addresses are not appearing in the recipient list.

Additional email addresses must be saved on the vendor record before the order is sent. If you added addresses after opening the panel, close the panel, verify the vendor record is saved correctly, and reopen the raise-and-email flow. The panel fetches the current addresses from the vendor record each time it opens.

The "There are deleted orders in the selected list" message appears during bulk raise.

One or more orders in your selection have been deleted. Refresh the orders listing, deselect any orders that are no longer active, and retry the bulk raise-and-email operation.

A vendor has multiple additional email addresses but the panel shows only the primary.

Confirm the additional email addresses are saved correctly on the vendor record. Each address must be entered and saved individually. If addresses were recently added, allow a moment for the record to refresh, then reopen the confirmation panel.

The integration status column is not visible on the orders listing.

The integration status column appears only when at least one vendor ordering integration (Aveda or NeillCorp) is enabled for your organization. If no integration is active, the column is hidden. Contact your Zenoti representative if you expect the column to be visible.

Was this article helpful?
Your feedback helps us improve our documentation.