ZenotiHelp

Switch to the on-hand quantity model

ZTZenoti Docs Team Updated September 5, 2026 6 min readGuide

Audience: Administrator

Warning: This is a one-way switch. Once you enable the on-hand quantity model, you cannot revert to the store-and-floor model through any self-service configuration. Reverting requires a Zenoti Support ticket and manual intervention. Communicate the change to every center and confirm readiness before enabling.

Why switch

The on-hand quantity model tracks a single total quantity per product at each center, instead of splitting stock between a "store" (back-of-house) quantity and a "floor" (shelf-facing) quantity. Most businesses operate with one physical shelf and do not need the split β€” for them, the on-hand model is simpler to count, harder to mis-enter, and it unlocks batch and expiry tracking. See Store and floor inventory for the history of the older model.


On this page


Before you switch

Permission: Edit (under Inventory) β€” Allows switching the inventory quantity model at the organization level.

Store-and-floor model (legacy). Stock for each product-center combination is split into two quantities: the store quantity (back-of-house, reserve, or warehouse stock) and the floor quantity (what is on the shelf and available for retail sale or service consumption). Audits and adjustments require entering both quantities separately. Store-to-floor movement is its own transaction. This model made sense for centers with a separate stockroom, but added extra steps for single-shelf centers.

On-hand quantity model (current). Stock for each product-center combination is a single total quantity. Audits and adjustments use one quantity field. There is no store-to-floor movement β€” the stock exists at the center. Batch and expiry tracking (FEFO) is available only in this model. This is the model recommended for new Zenoti customers.

Complete these checkpoints before switching, at every center, to avoid stock-quantity mismatches:

  • Submit and reconcile every pending audit.
  • Deliver and reconcile every pending purchase order (PO).
  • Complete every pending transfer order (TO) delivery.
  • Review in-transit transfer orders and resolve them β€” either complete delivery or cancel.
  • Communicate the cutover window to all inventory users. Plan the switch during low-activity hours.

Note on TO states: TOs in Updated state (saved-draft partial deliveries that have not yet been committed as Partially delivered) do not hold stock at the destination and can safely remain open across the switch. Only TOs in In Transit or Partially delivered must be resolved before cutover. See Manage transfer orders for the full TO lifecycle.

Steps

Switch to the on-hand quantity model

Switching to the on-hand quantity model is a one-time, irreversible migration performed by Zenoti Support. Self-service does not expose a toggle for this migration.

  1. Contact your Zenoti representative or open a Zenoti Support ticket to request the switch.
  2. Provide the requested cutover window so Support can schedule the migration during low-activity hours.
  3. Confirm with Support that all centers are ready: every pending audit reconciled, every PO delivered, every TO completed (see Before you switch).
  4. After Support completes the migration, verify the change at every center by opening Inventory > Retail > Current stock and confirming the Floor column is no longer displayed.

What changes after the switch

  • Store and floor columns merge. All inventory screens show a single on-hand quantity instead of separate store and floor quantities. Existing store and floor values are summed into one total per product-center.
  • Audit data entry simplifies. During an audit, users enter a single count per product instead of two counts.
  • Adjustments use a single quantity. Stock adjustments record one combined quantity change.
  • Reports show unified quantities. Current Stock, Stock Ledger, and other inventory reports display on-hand quantity without the store/floor breakdown. Historical records retain the original store/floor values for audit purposes.
  • Batch tracking becomes available. The on-hand quantity model is a prerequisite for batch and expiry tracking. After switching, you can enable batch tracking per product. See Configure batch and expiry tracking.

After the switch β€” verification checklist

Run through this checklist at each center within a day of the switch:

  1. Open the Current Stock report and confirm that total on-hand quantities match your expected totals (the sum of the pre-switch store + floor values).
  2. Open a product's edit form and confirm the Batch Tracking toggle is available.
  3. Record a small test stock adjustment on a low-value product and confirm the screen uses a single quantity field, not two.
  4. Run a sample audit on two or three products and confirm the audit screen asks for a single count.
  5. Open a recent purchase-order delivery and confirm it reconciled into the on-hand quantity, not a split store/floor quantity.

If any step fails, stop and raise a support ticket before continuing operations.

Multi-center rollout

The on-hand quantity model is an organization-level setting β€” enabling it flips every center in the organization at the same instant. You cannot pilot it at one center first.

To minimize operational risk:

  • Pick a cutover time outside business hours for all your centers (for example, a Monday morning before centers open, or a Sunday night).
  • Confirm the Before you switch checklist has been completed at every center, not the primary center alone.
  • Have an inventory manager and a technical contact on call during the cutover window.

Integration and API impact

Integrations, custom dashboards, and external reports that read Zenoti inventory data directly may need updates:

  • Code that reads a dedicated Floor Quantity field or a Store Quantity field (for example, via API responses, CSV exports, or direct database reports) will need to move to the on-hand quantity..
  • Historical queries that split store vs floor still work for pre-switch data but return the combined on-hand value for post-switch data.
  • Review every custom dashboard, Zapier flow, data warehouse pipeline, and partner integration that touches inventory quantity fields.

Rollback

There is no self-service rollback for this setting. Reverting to the store-and-floor model requires a Zenoti Support ticket; quantities are then re-split manually from the best available audit record. Plan as if this is a one-way switch.

Tips

  • Treat the switch as a mini-project, not a quick setting change. Give the rollout its own runbook, cutover time, and post-switch verification.
  • Do a mock switch in a sandbox environment first if you have one, to let your team rehearse the post-switch verification checklist.
  • After the switch, enable batch tracking only on the products that justify it (injectables, perishable skincare). Do not enable it organization-wide on day one.
  • Communicate the change visually at every center β€” a short memo or laminated printout of the new single-quantity audit screen prevents front-desk confusion.

Troubleshooting

  • Post-switch totals do not match pre-switch (store + floor). Pull the Stock Ledger for the cutover day and look for any pending transaction that was not closed before the switch. Raise a support ticket if the mismatch persists after you resolve open transactions.
  • Batch Tracking toggle still does not appear after the switch. The organization must also have batch tracking enabled by Zenoti. Open a support ticket β€” this is a separate org-level feature flag.
  • An integration partner is seeing zero for Floor Quantity. Expected β€” the field no longer splits. Update the integration to read on-hand quantity.
  • Old reports for pre-switch periods still show store/floor. Expected β€” historical records retain the original split for audit purposes. Only new post-switch transactions use on-hand quantity.
  • Users say "I cannot find the floor count field." Expected β€” there is only one count now. Remind users of the model change and point them at the updated audit and adjustment screens.
Was this article helpful?
Your feedback helps us improve our documentation.