ZenotiHelp

Reconciliation and approval

ZTZenoti Docs Team Updated September 6, 2026 10 min readGuide

Audience: Inventory managers (Reconciler role) and managers/supervisors (Approver role) who review and apply audit results.

After an audit is submitted, reconciliation compares the audited (physical) quantities against the system's expected quantities and produces the stock-update record. If your organization has enabled approval, the reconciliation enters a Pending state until a manager approves or rejects it. This article covers the Reconciler and Approver workflows, the approval threshold setting, the org/center/zone precedence rule, the approvals dashboard, and the reject path. For the upstream audit creation step, see Inventory audit and physical count.

On this page

Roles in the audit and reconciliation process

Role Action in this article
Reconciler Reviews variances; submits reconciliation.
Approver Approves or rejects reconciliations whose variance value exceeds the configured threshold.

For the full role framework including the Auditor role and required permissions, see Roles in the audit and reconciliation process in the Inventory audit article.

Before you begin

Prerequisites:

  • An audit must be Submitted (not in Draft) for the center before reconciliation can begin. Drafts do not appear to the Reconciler.

  • You need:

    Permission: Reconcile under Inventory β€” required to submit reconciliation records.

    Permission: Approve Reconcile under Inventory β€” required to approve or reject reconciliation records. The Approvals menu entry is visible to users whose role carries this permission.

Approval threshold setting

The approval workflow only triggers when the absolute deviation value of a reconciliation exceeds the center's threshold. Below the threshold, reconciliations apply automatically (auto-reconciliation per Auto-reconciliation behavior).

Setting location: at the center level, Configuration > Inventory > Audits > Make it mandatory to get approval to reconcile the difference between the expected and the audited stock value.

Enabling the setting reveals the Get approval when the minimum difference in value is field, which accepts the monetary threshold value. If the absolute deviation value of a reconciliation is greater than the threshold, the reconciliation requires manager approval before stock is updated. If the value is at or below the threshold, the system applies the audit quantities as the new stock levels without manager review.

If the setting is not configured (or set to zero), every reconciliation applies automatically β€” no manager-approval gate ever fires.

Approval levels: org, center, zone (precedence rule)

Approval enablement can be configured at three hierarchical levels. The system applies the most-specific override per the rule below.

Level Description
Organization Default approval setting for all centers in the organization.
Zone Overrides the organization default for centers grouped under that zone.
Center Overrides both organization and zone defaults for a specific center.

Precedence: Center override > Zone override > Organization default. If a center has its own setting, the center setting wins; otherwise the zone setting (if present) wins; otherwise the organization default applies. Configure each level in the corresponding settings panel; if you change the org default, centers and zones with explicit overrides are not affected.

Reconcile audit discrepancies

  1. At the center level, navigate to Inventory > Retail > Reconcile (or Inventory > Consumable > Reconcile). The Reconcile Inventory page opens.
  2. The system displays each audited product with three columns:
    • System quantity β€” the quantity recorded by Zenoti before the audit (the expected value).
    • Audited quantity β€” the physical count entered during the audit (the actual value).
    • Variance β€” Audited minus System. Negative variance is a missing-product deviation; positive variance is a surplus deviation.
  3. Review each variance. If you need to override the audited quantity (for example, the auditor entered an incorrect count and discovered the error during reconciliation), enter a corrected value in the Reconciled floor quantity or Reconciled storage quantity field as appropriate. Otherwise, leave the audited quantity as-is β€” the reconciliation will apply the audited value.
  4. For each discrepancy, select a reason code from the dropdown explaining the cause (for example, Damaged, Theft, Audit correction, Vendor error). Reason codes for reconciliation are configured separately from stock-adjustment reasons; your admin defines the available codes per organization via the stock adjustment reasons master. Do not confuse reconciliation reason codes with stock-adjustment reason codes β€” they are separate masters.
  5. For batch-tracked products, the variance row expands to show per-batch entries. Reconcile each batch individually (per-batch reconciled quantity and per-batch reason code). The product-level variance is the sum of batch-level variances.
  6. Select Submit Reconcile.

After Submit, the reconciliation either applies immediately (auto-reconciliation, no approval needed) or enters Pending status awaiting an Approver, depending on whether the variance value exceeds the approval threshold.

Note: The Submit Reconcile tooltip confirms: "Submit the reconciliation. The reconciled values will act as the starting inventory after reconciliation is submitted." If you need to save your progress without submitting, select Update Reconcile instead β€” this preserves your reconciled quantities and reason codes so you can return and complete the reconciliation later.

Auto-reconciliation behavior

When the variance value is at or below the approval threshold (or the approval workflow is not enabled at any level), the system auto-reconciles after the Reconciler submits. The reconciliation status is recorded as Auto-Reconciled.

Note: Auto-reconciliation applies the audited quantities as the new stock levels without manager review. The new on-hand value is computed using the valuation method the Auditor selected for unaudited products (see Inventory audit and physical count). The reconciliation is recorded for audit trail purposes and surfaces in the Stock ledger report. Use auto-reconciliation only if your organization does not require oversight of stock adjustments from audits.

Approval workflow

When the variance value exceeds the configured threshold and approval is enabled at the relevant level (per the precedence rule), the reconciliation enters Pending status and requires an Approver action.

Approve a reconciliation

  1. Navigate to Inventory > Retail > Approvals (or Inventory > Consumable > Approvals). The row appears only when your role has Approve Reconcile and the approval threshold is enabled for the center you are working in (at the organization level, for at least one center; at the zone level, for at least one center in the zone).
  2. The Approvals dashboard lists all pending reconciliations. Filter by center, date range, or status as needed.
  3. Select a reconciliation to review. The detail view shows:
    • Products with variances (System quantity / Audited quantity / Reconciled quantity / Variance).
    • Reason code per variance.
    • Original auditor and submission timestamp.
    • Approver identity and comments fields.
  4. Select Approve Reconcile.
  5. Enter comments explaining the approval (optional but recommended for audit trail).
  6. Confirm. The system applies the reconciled stock levels; the reconciliation status changes to Approved.

Note β€” 90-day approval window: The Approve Reconcile action is available only within 90 days of the audit date (the Approvals list column headed Audit On β€” the first word follows your organization's label for inventory audits, so the column reads "Stock Take On" or "Stock Count On" when that label has been changed). This is a system constraint β€” it cannot be configured or extended. Once the audit is older than 90 days, the Approvals list shows Reject instead of the approve action (tooltip: Approval of respective audit(s) is not allowed as audit done is beyond 90 days), and the reconcile page disables Submit Reconcile (tooltip: Reconciliation of respective audit(s) is not allowed as audit done is beyond 90 days) and offers deleting the audit; the reconciliation must then be resolved by the auditor re-submitting a fresh audit. Plan approval cadence so pending reconciliations are resolved promptly.

Reject a reconciliation

  1. From the Approvals dashboard, select the reconciliation to review.
  2. Select Reject Reconcile.
  3. Enter comments explaining the rejection (required β€” the original auditor uses this to understand what to recheck).
  4. Confirm. The reconciliation status changes to Rejected and the original auditor is notified (per Approver notification).

After rejection, the original auditor may edit the existing reconciliation (update reconciled quantities, change reason codes) and re-submit. The original audit record itself is not invalidated; only the reconciliation layer is mutable.

Approver notification

When a reconciliation enters Pending approval, the system notifies users with the Approve Reconcile permission via:

  • In-app: the Approvals dashboard surfaces the new pending reconciliation. The dashboard menu entry is visible to users whose role carries the Approve Reconcile permission.
  • Email: a notification email is sent. (Email template name and exact delivery rule live in your organization's notification template configuration; see your administrator if you do not receive expected approval emails.)

There is no automatic SLA or escalation for pending reconciliations β€” they remain Pending until an Approver acts. For business-critical centers, your admin should designate at least two users with Approve Reconcile so that approvals are not blocked by a single absent manager.

Approvals dashboard

The Approvals dashboard at Inventory > Retail > Approvals (or Consumable > Approvals) surfaces every pending reconciliation in scope (your accessible centers). As of the current release, the dashboard scope is reconciliations only β€” other potential pending inventory transactions (purchase order approvals, stock-adjustment approvals) are not gated by approval workflows in Zenoti and do not appear here. See Adjust stock for the unilateral stock-adjustment model.

The dashboard menu entry appears for users whose role carries the Approve Reconcile permission under Inventory.

Reconciliation status lifecycle

Reconciliation records move through the following statuses. Use these exact labels when communicating status to staff or when filtering the Approvals dashboard.

Status Meaning
Created The reconciliation record has been created but not yet submitted by the Reconciler.
Submitted The Reconciler has submitted the reconciliation. The system is evaluating whether approval is required.
Pending The variance value exceeds the approval threshold; the reconciliation is awaiting manager action.
Approved A manager approved the reconciliation; stock levels have been updated.
Rejected A manager rejected the reconciliation; the Reconciler must review and re-submit.
Auto-Reconciled The variance value was at or below the threshold (or approval is not enabled); the system applied the audit quantities automatically.

Important: Do not use informal status labels such as "Raised", "Closed", or "Done" when referring to reconciliation records. The statuses above are the only valid labels in Zenoti.

Worked example

A center performs a quarterly audit on Shampoo X.

  • System (expected) quantity: 50 units. System (perpetual average) cost per unit: $24.
  • Audited (actual) quantity: 47 units.
  • Variance: βˆ’3 units.
  • Variance value: 3 Γ— $24 = $72.

Suppose the center's Make it mandatory to get approval to reconcile the difference between the expected and the audited stock value threshold is set to $50. Because the variance value ($72) exceeds the threshold, the reconciliation enters Pending status after the Reconciler submits.

  • The Reconciler picks reason code Audit correction for the βˆ’3 variance row in the Reconciled floor quantity field, then selects Submit Reconcile.
  • The Approver sees the reconciliation on the Approvals dashboard at Inventory > Retail > Approvals, reviews the audit-correction reason, and selects Approve Reconcile.
  • The system updates the on-hand quantity to 47 units; the reconciliation status changes to Approved; an entry appears in the Stock ledger report for the βˆ’3 unit adjustment.

If the threshold had been $100, the same reconciliation ($72 variance) would have been below the threshold and auto-reconciled without manager review β€” status would be Auto-Reconciled.

Tips

  • Review variances carefully before approving. Large unexplained discrepancies may indicate theft, damage, or systematic errors in stock tracking.
  • Use reason codes consistently across centers to enable meaningful analysis of reconciliation patterns over time.
  • For organizations with strict controls, set the Make it mandatory to get approval to reconcile threshold low so that almost every variance requires manager review, and assign Approve Reconcile to managers/supervisors only.
  • For high-volume centers with many small variances (consumable counting noise), set the threshold higher so routine variances auto-apply and managers focus on real anomalies.
  • When approving, use the comments field to record what you reviewed (for example, "Verified physical count with auditor; deviation explained by display sample"). The audit trail is more useful with context.
  • Designate at least two users with Approve Reconcile per business unit so that pending reconciliations are not blocked by a single absent manager.

Troubleshooting

Symptom Likely cause What to try
Submit Reconcile button is greyed out The user lacks the Reconcile permission, or no audit has been submitted for the center. Verify the user has Reconcile under Inventory. Confirm the upstream audit is in Submitted status (not Draft).
Variance values are not visible The audit may still be Draft (not Submitted), or the user lacks visibility into the center. Ask the auditor to submit the audit. Verify the user's center scope.
Approve Reconcile button is disabled despite having the permission The reconciliation may already be approved or rejected, or its audit is older than 90 days (the row's action then reads Reject). Refresh the Approvals dashboard. If the reconciliation is still pending and the audit is within 90 days, contact Zenoti Support. If the audit is older than 90 days, the auditor must re-submit a fresh audit β€” the 90-day window is a system constraint and cannot be extended.
Auto-reconciliation did not fire after audit submission The variance value exceeded the configured approval threshold, so manager approval is required. Check the Approvals dashboard β€” the reconciliation is likely in Pending status. Or ask your admin to review the threshold setting or the center-level approval configuration.
Approval-level configuration not respected A more-specific override (center or zone) takes precedence over org default. Check center- and zone-level approval settings; per Approval levels, the most-specific override wins.
Approver did not receive an email Email template not configured, or Approver's email address not set on the user record. Ask your admin to verify the reconciliation-approval email template is active and that all users with Approve Reconcile have valid email addresses.
Pending reconciliation has been sitting for days No SLA or auto-action; pending reconciliations stay Pending until an Approver acts. Have a designated Approver review the dashboard. For coverage, designate at least two users with Approve Reconcile per business unit.
Was this article helpful?
Your feedback helps us improve our documentation.