ZenotiHelp

Manage product returns

ZTZenoti Docs Team Updated September 5, 2026 11 min readGuide

Audience: Center admin, inventory manager

A return order is a form you submit to a vendor to return products that are damaged, expired, or received in excess. You can also handle guest product returns through the POS (Point of Sale) by choosing to discard or restock returned items. This article covers both vendor return orders and guest return workflows.

Note: Returned stock is restocked to the product's On-Hand quantity at the center. Organizations on the legacy Store/Floor model restock to the storage quantity instead β€” see Inventory stock management for the model overview; to migrate from Store/Floor to On-Hand, contact Zenoti Support or your Zenoti representative.


On this page


Before you begin

Permission: Edit (on the Inventory security object) β€” Allows processing product returns in inventory.

A vendor return order touches creation, raising, and post-receipt steps; a guest return adds POS-side refund permissions. Required permissions:

Permission Used for
Edit (under Inventory) Editing return orders and modifying line items.
Raise (under Inventory) Raising and submitting a return order to the vendor.
Add Adjustments (under Inventory) Recording stock adjustments for damaged units that you do not return to the vendor.
POS refund permissions (under POS) Processing the guest-side refund for guest product returns.

For the complete inventory permission reference, see Inventory Permissions FAQ.

You also need:

  • Access to the Inventory section in Zenoti.
  • The vendor and products you intend to return must be available for your center. If a vendor or product does not appear in the lookup, ask your admin to make them available.
  • (For guest returns with restock) The Allow to restock returned products setting in Configuration > Inventory > Stock actions must be enabled. This is what gives providers separate restock and discard quantity fields at the POS return step.

When you do not need a return order

If you notice damaged or expired products before you accept the delivery in Zenoti β€” for example, a broken seal at the loading dock β€” you do not create a return order. Instead, mark the delivery as partial and reject the damaged units at receipt. See Receive deliveries β€” Handle damaged or short shipments.

A return order is for damaged, expired, or excess stock you have already received and counted into Zenoti.


Reasons to return products

You might create a return order for any of these reasons:

  • Damaged or expired products found after receiving β€” After you receive a delivery and check products into stock, you discover damage (for example, a broken seal during shelving). Create a return order.
  • Excess stock β€” Vendor shipped more than ordered, or center over-ordered. Create a return order for the excess.
  • Guest returns you want to send back to the vendor β€” A guest returns a product purchased from POS or Webstore. After the POS-side refund, you decide to return the unit to the vendor rather than restock or discard it. Create a return order.

Ways to return products in Zenoti

Approach When to use Stock impact
Partial Delivery Damage discovered at receipt, before counting into stock. None β€” units never entered stock.
Submit a return order (path) Damage, expiry, or excess discovered after receipt. Stock decreases when the return order is marked as Delivered.
Raise a purchase order with negative quantities Legacy technique. Not the recommended path. Stock decreases at the negative-quantity step.

Important: The negative-quantity purchase order technique is a UI quirk of the underlying form, not the supported workflow. Use the structured return-order procedure below β€” it is the path that engineering supports.


Return order lifecycle

A return order moves through these stages. Status casing matches the UI:

Stage Description
Created Order is saved as a draft. Stock is not affected.
Raised Order is submitted in Zenoti. Print or email it to the vendor. Stock is not yet affected.
Updated A raised order is edited and saved (for example, a credit note is added).
Delivered The vendor has received the goods and confirmed the return. Stock decreases at this step.

Note: Delivered on a return order means the vendor has received the returned goods β€” not your center. This is the inverse of Delivered on a regular purchase order, where Delivered means your center received the goods.


Steps

Create a return order

  1. Click the Inventory icon and navigate to Inventory > Orders.

    The orders list appears.

  2. From the I want to… drop-down list, select Add returns.

    The Return Order page appears.

  3. Select the vendor to which you want to return the products.

    The vendor address and your center address details appear.

  4. Enter the product name. As you type, suggestions appear for products that are available for the center and associated with the selected vendor.

  5. Enter the return quantities as negative values. Enter a quantity for retail, consumable, or both depending on what you want to return.

    Important: Enter the number of products as a negative value to indicate stock outflow. This is intentional and not a workaround β€” the same form is used for procurement (positive quantities = inflow) and returns (negative quantities = outflow).

  6. Click Add.

    The product is added and additional fields appear on the form.

    Important: After you add a product, you cannot change the vendor on the return order. To return to a different vendor, delete the product entry and repeat steps 3 to 5 with the new vendor selected.

  7. (Optional) Add more products to the order from the same vendor.

  8. Click Save as Draft.

    The return order is created with the status Created. Stock is not affected at this step.

Raise a return order

After you create a return order, raise it to submit it in Zenoti. A raised order is not automatically sent to the vendor β€” you must print it or email it from Zenoti.

  1. Navigate to Inventory > Orders.

  2. Locate the order in Created status.

  3. Click the desired REF#.

    The return order opens for editing.

  4. Click Raise.

    The return order status updates to Raised. Stock is still not affected at this step.

  5. Print the order or email it to the vendor. The Print and Email behavior on a return order matches the equivalent action on a purchase order β€” see Email orders to vendors for the email flow.

Mark a return order as returned

After you raise a return order and send it to the vendor, wait for the vendor to confirm the return. Then mark the order as returned.

  1. Navigate to Inventory > Orders.

  2. Locate the order in Raised status.

  3. Click the desired REF#.

    The return order opens for editing.

  4. Click Returned.

    The most likely behavior on click:

    • The order status flips from Raised to Delivered.
    • Stock decreases by the absolute value of the negative quantities you entered.
    • An entry appears in the Returns report.

After the order is marked as Delivered, you can view it in the Returns report β€” see Reporting below.


Guest product returns

Guests can purchase products from the POS, Webstore, series packages, gifts, and promotional kits. When a guest returns a product, your center can choose to discard or restock it via the POS return flow. After the return, you may further decide to send the unit back to the vendor via a return order.

Zenoti provides two return actions at the POS return step:

  • Discard β€” Refunds the product and marks the entire returned quantity as discarded.
  • Restock β€” Refunds the product and adds it back to on-hand quantity. If a guest returns multiple units (for example, 3 bottles of a hair shampoo) and one is damaged, the provider can restock only the undamaged units while discarding the rest.

Note: Restock requires Allow to restock returned products to be enabled at Configuration > Inventory > Stock actions. Without this setting, the only option at the POS return step is Discard.

When the guest is refunded, Zenoti refunds the product to the guest through the original tender used at sale.

Discard workflow

When a provider selects Discard during a guest return, sequence the actions as follows.

At refund time:

  1. Zenoti refunds the product to the guest.
  2. The system records the returned quantity as discarded quantity.

Later (post-refund reconciliation):

  1. Perform a stock count to ensure the current stock reflects the correct quantity. See Run audit and reconciliation.
  2. Use reconciliation notes to record the reason for discarding (for example, Guest return β€” bottle leaking).

Restock workflow

When a provider selects Restock during a guest return:

  1. Zenoti refunds the product to the guest.
  2. The provider inspects the returned items. The POS return form shows two separate fields β€” restock quantity and discard quantity β€” so the provider can split a partially-damaged return.
  3. The system adds the restocked quantity back to the on-hand quantity at the center.

Does a guest return automatically go back into on-hand inventory?

No. The returned product is not restocked automatically unless Allow to restock returned products is enabled in Configuration > Inventory > Stock actions. When this setting is enabled, the product restocks to the floor (legacy model) or directly to the on-hand quantity (post-April-2020 model).

Post-restock actions

After a guest return is restocked, you can take one of these follow-up actions on the unit:

Action Description Procedure
Return to vendor Send the unit back to the vendor (for example, when the unit is damaged but vendor accepts returns). Create a return order above.
Resell Resell the unit at POS if it is in good condition (for example, repackage a unit with damaged outer packaging). Standard POS sale β€” no special inventory action.
Convert and consume Convert the unit from retail to consumable for professional supply. Convert products.
Transfer to a tracking center Transfer the unit to a virtual tracking center for org-wide review before final disposition. Manage transfer orders and Track damaged and expired products.

Return order field reference

When you add a product to a return order, these fields appear on the line item:

Field Description
Product Code The code defined by the admin in the Products page.
Vendor Product Part Number The vendor's part number for the product, defined in Configuration > Products > Vendors > Manage vendors > Products** tab (for example, LO-84327).
Product Name Name of the product (for example, Lotus Face Gel).
Stock Current stock count for retail and consumable. A negative value indicates that more outflow (sales, consumption, adjustments) than inflow has been recorded for this product. See Negative inventory FAQ.
Last Month Usage Units used (retail and consumable) in the previous month.
Last Month Purchase Units purchased (retail and consumable) in the previous month.
Retail Qty Retail quantity for return. Shows 0 if you are not returning retail quantity.
Consumable Qty Consumable quantity for return. Shows 0 if you are not returning consumable quantity.
MSRP ($) Retail price. Labeled MSRP, MRP, or RRP depending on your region configuration.
Unit Price ($) Vendor-defined price per unit for the center.
Discount ($ or %) Vendor discount per unit for the center.
OnDelivery Price ($) Price charged by the vendor for delivery. Usually the same as Unit Price unless the vendor offers different pricing. You can change this while receiving the delivery.
Total Price ($) (Retail Qty + Consumable Qty) Γ— Unit Price.
Tax Vendor-defined tax per unit. You can edit this on delivery if the vendor offers different pricing.
Total Tax ($) (Retail Qty + Consumable Qty) Γ— Tax.
Notes Free-text notes about the return.

For raised return orders, two additional fields track undelivered quantities:

Field Description
Retail Qty (raised view) Retail raised for return minus retail received by vendor.
Consumable Qty (raised view) Consumable raised for return minus consumable received by vendor.

Video: Manage Returns to a Vendor (1:07) β€” How to process product returns to a vendor.


Reporting

Report Use to track
Returns report (Reports > Inventory > Returns) Vendor returns and guest returns with sold, restocked, and discarded quantities. If your organization does not have access to this report, contact Zenoti Support.
Stock ledger report Stock-level effect of every return-order Delivered event.
Cost of goods report COGS impact of returns β€” return-to-vendor reverses the COGS impact of the original receipt; discard does not.
Current stock report Verify post-return stock at the affected center.

When the returned products are batch-tracked, the return decrements the specific batch you select on the return-order line item β€” see Batch and lot tracking for batch interaction.


Troubleshooting

Issue Likely cause and fix
I cannot select a vendor on the return order. The vendor is not associated with your center. Ask your admin to add the vendor at Configuration > Products > Vendors > Manage vendors**.
The product I want to return does not appear in the suggestion list. The product is either not associated with your center or not associated with the selected vendor. Ask your admin to associate it.
The system rejects negative quantities. Verify that you are on the Add returns form (not a regular purchase order form). Negative quantities are valid only on a return order.
After I added products, I cannot change the vendor. This is expected behavior. Delete the product entries first and re-select the vendor.
The Returns report is not in Configuration > Reports > List of reports. The report may not be enabled for your tenant. Contact Zenoti Support.
The order shows Raised but the vendor never received the email. A raised order is not auto-sent. Open the order and use the email or print action β€” see Email orders to vendors.

Tips

  • When a guest returns multiple units and some are damaged, use the restock workflow with separate restock and discard quantity fields to handle the split in a single transaction.
  • After restocking a guest return, decide quickly whether to return-to-vendor, resell, convert, or transfer to a tracking center β€” leaving units in restock-pending state distorts on-hand reports.
  • Keep return orders narrow β€” one return order per vendor, per disposition reason. This makes the Returns report easier to read at quarter-end.
  • For batch-tracked products, select the specific batch on the return-order line so the batch-level stock decrement matches the physical units leaving your center.

Was this article helpful?
Your feedback helps us improve our documentation.