Track product consumption for services
Audience: Service provider, center admin, inventory manager
Track the products consumed during service appointments to understand your true cost of service delivery. Zenoti links products to services through consumption mappings, automatically deducts stock when appointments are completed, and surfaces planned-versus-actual usage in the Bill of Materials (BOM) report. This article covers the end-to-end workflow: setting up service-product mappings, configuring auto-checkout behavior, recording consumption manually for batch-tracked products, and overriding defaults at the service or appointment level.
On this page
- Before you begin
- How product consumption works
- Set up service-product mappings
- Consumption for add-on services
- Auto-checkout flows
- Override default consumption
- Record consumption for batch-tracked products
- Cancellations, no-shows, reschedules, and multi-provider services
- Bill of Materials report
- Admin settings that affect this workflow
- Troubleshooting
- What happens next
- Tips
- Related articles
Before you begin
Permission: Edit (under Inventory) β required to configure service-product mappings and to record manual consumption from the Appointment Book or POS (Point of Sale).
- Auto-checkout for service consumption is enabled at the org level. The setting is Enable auto checkouts for consumable products, configured under Configuration > Inventory. Without this setting, products are not auto-deducted when an appointment closes β providers must record consumption manually.
- The products you want to track are set up as consumable products. Retail-only products cannot be linked to services for consumption.
- The products are assigned to (and have stock at) the centers where the services are delivered.
- For batch-tracked products: batch and expiry management is configured. See Configure batch and expiry management.
How product consumption works
Product consumption is the link between your inventory and your service delivery.
- Service-product mapping defines which products are used during each service and the expected quantity per appointment.
- Auto-checkout (when enabled) deducts the mapped product quantities from on-hand stock at the moment the appointment is completed β without manual intervention from the provider or the front desk.
- Manual checkout is used when auto-checkout is disabled, or for batch-tracked products where the provider must select the specific batch being dispensed, or when a provider adds a product not in the default mapping.
- Bill of Materials (BOM) report records every consumption event with planned-vs-actual quantities, batch attribution (where applicable), provider attribution, and a flag indicating whether the product was manually added by the provider.
The benefit of running a complete service-product mapping is that the BOM report becomes a reliable source of truth for true cost-of-service-delivery analysis, retraining opportunities (where consumption consistently overshoots the standard), and waste investigation.
Service unit and quantity scaling
The Qty To Be Used value in the BOM report is computed as the planned consumption quantity from the service-product mapping multiplied by the invoice line's quantity. One booked service line counts as one service unit by default β the planned quantity does not scale with appointment duration.
For example, if a service maps 20 ml of product, and the invoice line has a quantity of 1 (one booked service), the BOM reports 20 ml planned. If the same service is booked twice on the same invoice line (quantity of 2), the BOM reports 40 ml planned.
Set up service-product mappings
Link consumable products to services so that inventory is automatically deducted when the service is performed.
- Navigate to Master data > Services. The services list opens.
- Select the service you want to configure.
- Click Add Product to link a consumable product.
- Enter the Quantity to be consumed per appointment.
- Set the Track consumption automatically option:
- Selected β the product is automatically consumed when the appointment is completed (auto-checkout).
- Cleared β the product appears as a suggested consumption but the provider must confirm it manually before stock is deducted.
- Click Save.
Repeat for each product consumed during the service. A single service can map to multiple products with independent quantities and Track consumption automatically settings.
Tip: Map only the products you genuinely want auto-deducted. Over-mapping leads to over-deductions and forces providers to undo or override frequently.
Consumption for add-on services
Add-on services follow a different consumption model from regular services. Understanding this distinction prevents configuration errors.
- Consumption for add-ons is automatic only. There is no manual consumption mode for add-on services. When an add-on is completed, the system automatically deducts the mapped consumable quantities β providers cannot trigger or suppress this deduction individually.
- At least one consumable must remain on the mapping. A validation rule prevents removing the last consumable from an add-on's product mapping. If you need to stop consuming a product for an add-on, replace it with a different product rather than deleting all entries.
Because add-on consumption cannot be manually overridden at the appointment level, keep add-on product mappings accurate. Errors in add-on mappings affect every appointment that includes the add-on, and corrections require updating the mapping on the service's PRODUCTS tab (Master data > Services).
Auto-checkout flows
Zenoti supports three distinct auto-checkout flows. Each flow has its own trigger, its own controlling setting, and its own destination ledger event. Articles and admins commonly conflate these β make sure you are configuring the right one.
| Trigger | Description | Setting that controls it |
|---|---|---|
| Appointment closed (Appointment Product Consumption β APC) | When an appointment is marked complete, products mapped to the service with Track consumption automatically selected are auto-deducted from on-hand stock. | Enable auto checkouts for consumable products (org level β Configuration > Inventory). |
| Invoice created at POS | When a retail product is sold at the POS, on-hand stock is auto-deducted at the moment the invoice is closed. | Enable auto checkouts for product sales (center level) and Enable auto checkouts from store to floor for retail product sales (org level). |
| Transfer order delivered | When a transfer order is marked delivered, the destination center's stock is auto-checked out from store to floor. | Enable auto checkouts from store to floor for product transfers (org level). |
| Manual checkout (consumption) β controlled default | When the provider clicks Checkout for consumption in the Appointment Book, the form pre-selects the consumption type by default β minimizing accidental retail-checkout misclassification. | Manual checkout for consumption when checking out from store to floor (select 'Checkout for consumption by default') (org level). |
For Appointment Product Consumption (APC) specifically, when an appointment closes:
- The system reads the service-product mapping configured for the service.
- It validates that sufficient on-hand stock is available at the appointment center.
- It creates a consumption checkout record and writes a stock-ledger event for each line item.
- It sets the consumption status to Consumed for each mapped product.
If on-hand stock is insufficient for any line item, auto-checkout for that line item does not proceed, preventing on-hand from going negative. The remaining (in-stock) line items are still deducted. Investigate any blocked line items in the Bill of Materials report β they appear with Qty Used = 0.
Batch tracking and auto-checkout
For batch-tracked products, auto-checkout does not automatically select a batch. The system records that the product was consumed but the provider must manually specify the batch being dispensed. See Record consumption for batch-tracked products below.
Batch tracking during consumption
Batch tracking is supported during product checkout (consumption). When an appointment closes and a mapped product is batch-tracked, the system records a batch-level outflow transaction. The provider selects the batch being dispensed; the system validates that the selected batch has sufficient quantity and records the outflow.
Note: Batch tracking during checkout applies to purchase and transfer order receipt, returns, audits, and consumption. It does not apply to retail-to-consumable conversions or kit operations.
Auto-consumption and appointment lifecycle
When an appointment is cancelled or marked no-show: The system annotates the linked auto-checkout record with "(Appointment Cancelled)" and voids the consumption record β removing its stock impact from consumption tracking. For batch-tracked products, the corresponding batch transaction is also voided. The stock deduction at the checkout level is not returned; the reversal operates at the consumption-record level only.
When an appointment is rescheduled: Consumption records are retained and re-dated to reflect the new appointment time. The consumption follows the appointment to its new time β it is neither reversed and re-fired, nor held in a pending state.
Override default consumption
You can override the default consumption rule at two levels.
Service-level override
Override the default product consumption for a specific service across all future appointments of that service.
- Open the service in Master data > Services.
- Enable Override Product Consumption.
- Adjust quantities or add or remove products on the override mapping.
- Click Save.
The override applies to all future appointments of this service at this center until you remove or update it. Past appointments are not retroactively re-consumed.
Appointment-level override
Add or remove products for a single appointment without changing the standard service mapping.
- Open the appointment in the Appointment Book.
- Open the products-consumed section (three-dot menu > Add Consumed Products, or the products tab on the appointment detail).
- Manually add a product that was not part of the default mapping, or adjust the quantity used for any mapped product.
Manually-added products are flagged with Manually Added = Yes in the Bill of Materials report β use this flag to spot patterns that should become permanent service-mapping changes.
Record consumption for batch-tracked products
For batch-tracked products, the provider must select the specific batch when recording consumption β auto-checkout cannot pick the batch for the provider. The system surfaces the available batches in expiry order so providers can comply with First Expiry First Out (FEFO) discipline.
Important: Zenoti does not automatically select a batch. The provider must manually choose the batch from the dropdown. The list is sorted by soonest expiry to guide First Expiry First Out (FEFO) compliance, but the final selection is always manual.
From the POS
- Open the appointment and click POS to start the invoice.
- Add the product to the invoice.
- Click Manage for the batch-enabled product.
- Select the Batch and Quantity.
- Click Add, then proceed to checkout.
To update or edit batch details before checkout, click the batch icon at the line-item level.
From the Appointment Book
- Open the service from the Appointment Book.
- From the three-dot menu, select Add Consumed Products.
- Click Add batches to assign batch entries for each product. This step is mandatory for every batch-enabled product on the appointment.
- Use the edit icon to modify the quantity if needed.
Note: You cannot edit the batch number or the expiry date once recorded. To correct a mistake, delete the batch entry and add a new one with the correct details.
Important: Payment is not processed until all batch details are entered. If batch details are missing, you are redirected from the payment screen to the Batch Details panel.
For setup details and the broader batch model, see Batch and lot tracking and Configure batch and expiry management.
Batch validation
The system validates that the quantities recorded against each batch reconcile with the total consumed quantity for the product. If the sum of batch quantities does not match the consumption quantity, the record cannot be saved.
Note β mobile app. The ZenotiMobile app has its own Add Consumable screen for recording batch-tracked consumption, separate from the web flow described above. It uses its own button names (Add batch info / Add units) rather than Add batches / Manage, but the underlying requirement is the same: batch details must be provided before checkout can proceed.
Cancellations, no-shows, reschedules, and multi-provider services
Cancellations and no-shows
When an appointment is cancelled or marked no-show after product consumption has been recorded, the consumption record is annotated with "(Appointment Cancelled)" and its stock impact is voided from consumption tracking. For batch-tracked products, the corresponding batch transaction is also voided. The stock deduction at the checkout level is not returned β the reversal operates at the consumption-record level only.
Rescheduled appointments
When an appointment with recorded product consumption is rescheduled, the consumption records are retained and re-dated. The consumption follows the appointment to its new date and time β it is not reversed and re-created. Stock and audit caches are refreshed for both the original and the new dates.
Multi-provider services
The Therapist column in the Bill of Materials report attributes consumption to the provider linked to the appointment record. The inventory module does not contain split logic for multi-provider services β attribution behavior for group or parallel services is governed by the Appointment Book module. Contact Zenoti Support if you need to understand the exact attribution rule for your multi-provider configuration.
Bill of Materials report
The Bill of Materials (BOM) report lists every product consumed against an appointment, with planned vs. actual quantities and provider attribution. See Bill of Materials report for the report procedure and column reference.
Admin settings that affect this workflow
The following organization- and center-level settings change how this workflow behaves. Settings are configured under Configuration > Inventory (org level) or Configuration > Business details > Zones and centers > Centers > [Center] > General > Inventory (center level).
| Setting | Level | Effect |
|---|---|---|
| Enable auto checkouts for consumable products | Org (with center override) | Gates Appointment Product Consumption (APC) auto-checkout β when off, providers must record service consumption manually. |
| Enable auto checkouts for product sales | Center | Auto-deducts on-hand stock when a retail product is sold at POS. |
| Enable auto checkouts from store to floor for retail product sales | Org | Auto-checkout from storeroom to floor for retail product sales (legacy store-and-floor model). |
| Enable auto checkouts from store to floor for product transfers | Org | Auto-checkout from storeroom to floor when a transfer order is delivered. |
| Manual checkout for consumption when checking out from store to floor (select 'Checkout for consumption by default') | Org | Pre-selects "Consumption" as the default checkout type when a user manually checks out stock from store to floor β reduces accidental retail-checkout misclassification. |
Note: Org-level toggles can be overridden at the center level for tenants on the multi-center hierarchy. Verify the effective setting at the center where the appointment is delivered.
What to contact Zenoti Support for
Some consumption behavior depends on Appointment Book configuration rather than Inventory settings, so it varies by tenant and cannot be determined from this article alone. Contact Zenoti Support to confirm the exact behavior for your organization before relying on any of the following for stock or accounting reconciliation:
| What to ask about | Why it varies |
|---|---|
| Attribution for multi-provider, group, or parallel services | The Therapist column follows the provider linked to the appointment record. Split logic is owned by the Appointment Book module, not Inventory. |
| Whether a cancellation, no-show, or reschedule returns stock | The consumption record is annotated and voided, but the checkout-level stock deduction is not automatically returned. |
| Consumption behavior for appointments edited after completion | Depends on the Appointment Book edit rules in force at your centers. |
Troubleshooting
| Issue | Likely cause and fix |
|---|---|
| Products are not auto-deducted when an appointment is completed. | Enable auto checkouts for consumable products is disabled at the org or the appointment's center. Verify the effective setting and ask your admin to enable it. Alternatively, Track consumption automatically is off for the service-product mapping β turn it on from the service's PRODUCTS tab (Master data > Services). |
| The provider can complete the appointment but the BOM report shows Qty Used = 0 for a mapped product. | On-hand stock for that product was insufficient at the appointment center, so the auto-checkout for that line was blocked. Replenish the center's on-hand and re-run the consumption manually from the Appointment Book, or accept the gap and treat the appointment as a no-product visit. |
| The Batch dropdown is empty when recording consumption for a batch-tracked product. | No active batch is in stock at the center. Receive a delivery against a purchase order (PO) with a batch number, or transfer in a batch from another center. See Receive deliveries. |
| The provider cannot save batch details from the Appointment Book. | The provider must enter both Batch Number and Expiry Date for each unit. Payment is blocked until all batch details are entered β providers are redirected to the Batch Details panel from the payment screen. Confirm the form is complete before clicking through. |
| The BOM report shows a high count of Manually Added = Yes rows for a service. | Providers are routinely adding a product that is not in the standard service-product mapping. Update the mapping on the service's PRODUCTS tab (Master data > Services > [Service]) to make it part of the default flow. |
| The Therapist column shows multiple providers split across rows for one appointment. | Attribution behavior for multi-provider services is governed by the Appointment Book module. See the multi-provider note above and verify Appointment Book configuration. |
| FEFO ordering is not respected β providers select a non-FEFO batch. | The batch dropdown sorts batches with the soonest expiry first; FEFO compliance is a procedural discipline, not a hard system enforcement. Train providers on FEFO and audit via the Near expiry report. |
| An add-on's last consumable cannot be removed from the mapping. | A validation rule requires at least one consumable to remain on every add-on mapping. Replace the product with a different consumable rather than deleting all entries. |
| Consumption is not reversed after an appointment is cancelled. | This is expected behavior. When an appointment is cancelled, the consumption record is annotated and voided at the consumption-record level, but the stock deduction at the checkout level is not returned. Review the Bill of Materials report to verify the annotation and contact Zenoti Support if the record does not reflect the cancellation. |
What happens next
- A consumption checkout record is created for each line item.
- The on-hand stock at the appointment center is decremented for each consumed product.
- A stock-ledger event is written for each consumption β see Stock ledger report to verify the event landed.
- The Bill of Materials (BOM) report records the appointment's consumption with planned-vs-actual quantities and provider attribution β see Bill of Materials report.
- Cost-of-Goods-Sold (COGS) for the consumed product updates via the perpetual average calculation β see Cost of goods report.
- For batch-tracked products, the specific batch's on-hand quantity is decremented; once a batch reaches zero, it is no longer offered in the batch dropdown.
Tips
- Run the BOM report monthly per service to spot mapping drift β services where actual consistently exceeds the mapping likely need a mapping update or a provider-retraining conversation.
- For batch-tracked products, train providers to dispense from the topmost batch in the dropdown β that is the batch with the soonest expiry (FEFO).
- Use the Manually Added flag in the BOM report to find products being added on every appointment β they belong in the standard mapping.
- For tenants on the multi-center hierarchy, check the effective auto-checkout setting at the appointment's center, not only the org level. Center-level overrides are common.
- Reserve service-level overrides for genuinely different service variants (e.g., short vs. long versions). Frequent appointment-level overrides are a signal that the standard mapping needs to be updated.
- Keep add-on product mappings accurate β because add-on consumption is automatic only and cannot be overridden at the appointment level, errors affect every appointment that includes the add-on.