ZenotiHelp

Get started with inventory

ZTZenoti Docs Team Updated September 5, 2026 13 min readGuide

Audience: First-time inventory administrators setting up the Inventory module for a new organization, a new center, or a new franchise. For concept context, see Inventory overview first.

Zenoti inventory helps you manage stock across your organization, from initial setup through daily operations. This guide walks you through the seven setup steps in the recommended order, pointing you to detailed articles for each configuration area.

Time to complete: Roughly 2 to 4 hours for a small organization with one center and up to about 50 products. Multi-center and multi-vendor organizations should plan for additional time proportional to the product and vendor catalog size.

Note: This article provides the recommended setup sequence. For detailed field-by-field instructions for each step, see Set up essential inventory details.


On this page


Before you begin

Ensure you have the following:

  • Inventory module license active at each center that will use inventory.
  • Role with Administrator mode access and both organization-level and center-level permissions.
  • Business tax model decided β€” tax-inclusive vs tax-exclusive β€” because this affects how you configure tax groups. See Configure inventory labels for the retail price label setting (MSRP / MRP / RRP) that often maps to this decision.
  • Product list ready with names, codes, categories, retail vs consumable designation, and pricing.
  • Vendor list ready with vendor names, contact details, email addresses, and any local tax identification numbers required by your jurisdiction (such as TIN, VAT ID, GST number, or CST number in India).
  • At least one tax group created for inventory. If your business follows the tax-inclusive model, also create a zero tax group for inventory.
  • If migrating from another inventory system, decide your cutover date and whether you will import historical transactions via bulk import or start fresh with opening stock.

Best practice: Restrict access to the Inventory module to the Inventory Manager and the Owner roles by default. Grant additional roles explicit permissions only as needed. See Inventory permissions FAQ.

Setup sequence

The setup breaks into seven steps in the recommended order. The first four are organization-level and performed once per organization (or once per set of centers that share the same configuration). The last three are per-center and are performed by the Inventory Manager of each center.

# Step Scope Section below
1 Create products Organization Create products
2 Define units of measurement Organization Define units of measurement
3 Create vendors Organization Create vendors
4 Associate vendors and products Organization Associate vendors and products
5 Select tax groups for each center Center Select tax groups for each center
6 Set up opening stock Center Set up opening stock
7 (Alternative) Set stock without opening stock Center Alternative

Important: Steps 1 through 5 are performed once for each center that shares the organization's configuration. If centers share the same product catalog and vendor list, steps 1 through 4 are shared. The Inventory Manager of each individual center performs step 6 (or 7) to set the center's starting stock.

Create products

Create a product in Zenoti for each retail or professional supply in your company. Provide all necessary details such as code, category, units, type, commission, price and tax, alert quantity, transfer price and tax, variants (if applicable), catalog details (for online sales), and related products and services.

If your center works with product kits, your admin must mark the product as a kit and set up the products that must be part of it. See Product Kit Management for the full setup and bundling procedure.

Important: Ensure that you select the centers where the product must be available. Centers cannot perform the initial stock count or raise purchase orders, transfer orders, and return orders without the products.

  1. Create categories and subcategories for the products.

Note: Product categories and subcategories work similarly to service categories and subcategories. Zenoti recommends that you categorize products effectively for an effective inventory system.

  1. Create products. See Set up essential inventory details for step-by-step instructions.

Define units of measurement

Unit of Measurement (UoM) defines how your company measures a product's quantity. For retail products, the UoM is typically Units, while for consumables it can be ml, gallon, oz, grams, and so on.

For example, a vendor may supply products in bulk as 50 bottles in one case. For the vendor, 1 carton is 1 unit. However, when you receive the delivery, you unbundle each carton and consider 1 bottle as 1 unit. The way you define UoM for a product affects your entire inventory, especially when raising orders.

  1. At the organization level, navigate to Master data.
  2. Select Products.
  3. Select the product name for which you want to set the units. The product details appear.
  4. Select the UoM for the product. For example, for a retail product, select Units.
  5. Enter the amount of the product. For example, if 1 bottle of Hair Shampoo is 1 product, enter 1 in the Amount field. For product kits, enter 1 in the Amount field, not the number of products in the kit.
  6. Select Save.

Create vendors

A vendor is a supplier of products. It is usually external to the company; however, it can also be a center within the company. In the latter case, the center acting as a vendor becomes a warehouse or corporate office, which procures products from the vendor for the entire company.

Important: Ensure that you add an email address for each vendor. Centers use this email address to send a copy of raised orders. The role you are assigned must have permission to create and modify vendor accounts.

  1. At the organization level, select the Configuration icon.
  2. Search for and select Vendors from the Products section.
  3. Select Add.
  4. Enter the required details such as vendor name, vendor code, phone number, and email address.
  5. Enter any local tax identification numbers required by your jurisdiction. Zenoti exposes fields for the Taxpayer's Identification Number (TIN) (used in multiple jurisdictions as a general vendor tax ID) and, for organizations operating in India, the Central Sales Tax (CST) number (an indirect tax on goods sold across Indian states when the buyer and seller are in different states). Leave fields blank if they do not apply to your jurisdiction.
  6. Select Next.
  7. On the Products page, specify the products supplied by the vendor.
  8. Select Finish.

Associate vendors and products

Before you start raising orders, associate a product with at least one vendor. You can also associate a product with multiple vendors if you get a single product from multiple suppliers.

The Products tab of the Vendor page allows you to set up a center-specific association between vendors and products by listing all the products supplied by the vendor, including prices and any applicable discounts.

Important: While raising purchase orders to vendors, you can only raise orders from centers that have the vendor-product association.

  1. At the organization level, select the Configuration icon.
  2. Search for and select Vendors from the Products section.
  3. Select the name of the vendor to whom you want to assign products.
  4. Select the Products tab.
  5. Select +Product.
  6. Based on whether you want to maintain the same price, discount, and tax group for the product across multiple centers, do one of the following:

Option 1: Maintain the same (default) price, discount, and tax group across multiple centers

  1. In the Product field, enter the name or code of the product and select a match from the list of suggestions.
  2. In the Center(s) field, select the centers in which the product-vendor association will be applicable. To make the association applicable at all centers, select Check All.
  3. Select Set same price, discount, tax group for all centers.
  4. Select Show. You can see the centers selected if the product is associated with them.
  5. In the Copy to below centers field, specify the price, discount, or tax group, and select the copy icon.

Note: You can choose to copy only the price, discount, or the tax group for the selected centers. The tax group is copied only to those centers that have the selected tax group assigned for Inventory.

Option 2: Add different prices, discounts, or tax groups

  1. In the Product field, enter the name or code of the product and select a match from the list of suggestions.

  2. In the Center(s) field, select the centers in which the product-vendor association will be applicable.

  3. Select Show.

  4. Specify the Price and any applicable Discount or Tax Group for each center.

  5. Select Submit.

Select tax groups for each center

Select at least one tax group for each center for Inventory. This allows the centers to access Zenoti Inventory. Without a tax group assigned, users at the center cannot access the Inventory system and receive an error message.

Note: The selected tax groups appear in the Tax dropdown while creating a purchase order.

Set up opening stock

If you are a new center or a new franchisee, set up the opening stock (also known as starting inventory) to set the stock level and stock value for each center.

What is opening stock? A single point-in-time snapshot of every product the center holds on the go-live date, with a per-product unit cost. After save, the opening stock posts to the Store location at the center (Floor = 0). You can edit individual product entries before the final save via Save Progress; after Save and Finish, changes are made through regular adjustments or purchase orders.

Note: The Set Up Opening Stock page is available for organizations that signed up with Zenoti from the July 2020 release onward. If your organization predates that release and the page is unavailable, use the Alternative section below.

Important: If the current center is acting as a vendor, the opening stock process is not supported for such a center.

Before you begin, ensure that you have completed the following:

  • Create products at the organization level. See Set up essential inventory details.
  • Create vendors and associate them with your center.
  • Associate vendors with products.
  • Create tax groups for inventory.

Important: If your business follows the tax-inclusive model, create a zero tax group for inventory.

  1. At the center level, select the Inventory icon.
  2. Select the Dashboard icon. The Set Up Opening Stock page appears.
  3. Select Add Opening Stock.

Important: Select Start stocks afresh if you do not have stock and you want to set up the starting inventory and value manually by raising purchase orders.

The Opening Stock page appears. You can see all the stock that is added to your center.

Note: If you do not see any product and you have the permission to create products, go ahead and add the products. See Set up essential inventory details for instructions. If you do not have permission, reach out to your corporate office or head office. If a product is not active in your center, you can mark it as active.

  1. Enter the following information for the desired products:
  • Vendor β€” Select the vendor from where you purchase the product.
  • Quantity β€” Enter the quantity of the product.
  • Unit Cost β€” Enter the cost at which you procure the product from the vendor.
  • Tax β€” Select the tax group that is applicable.

Important: If your business follows the tax-inclusive model, select the zero tax that your admin must have created for inventory. For each product for which you want to set up the stock, you must enter the Vendor, Quantity, Unit Cost, and Tax. For products with zero quantity, do not enter the value 0 in the Quantity column. Leave it blank.

  • Total Taxes β€” The tax paid for the total quantity of the product. Calculated as Total Taxes = Quantity x Tax.
  • Sub Total β€” The total cost of the product including the tax, if applicable.
  • Notes β€” Enter any additional comments or information. The notes appear on the purchase order and on audits and reconciliations in the Audit History report.
  1. (Optional) At the top of the page, you can view the current date when the opening stock is being set up. To change this date, select the Edit icon, select the desired date and time, and select Apply.
  2. (Optional) Select Save Progress if you are not done entering the details for all the products.

Note: You can view the last time that the opening stock was saved at the bottom of the page.

  1. Before you select Save and Finish, ensure that you have entered the details for all products. A confirmation dialog box appears.
  2. Select Continue.

Alternative: Set stock level and value without opening stock

If the opening stock page is not available, you can set quantities and values through these methods:

  • To set only the quantities, conduct a stock count for the desired products in your center.
  • To set quantities and get value for the stock, raise a purchase order and receive it in Zenoti. You can also use the Import order option to save time.
  • Raise a purchase order for the products with the required quantity
  • Receive the orders in Zenoti

What happens next

After you set up the opening stock, Zenoti automatically creates the following audits and purchase orders in this sequence:

  1. Zero audits -- Zenoti creates two audits (one for retail and one for consumables), both with zero quantities, and reconciles them automatically. View these audits at Reports > Inventory > Audit History.

  2. Delivered purchase orders with details from the opening stock β€” Zenoti creates delivered purchase orders (with the quantity, cost, and tax you entered during opening stock setup) for each product by vendor and by product type combination.

Important: Zenoti does not create transfer orders automatically. For example, if you procure Hair Shampoo from Vendor 1 and the product type is both retail and consumable, the purchase orders are created as: PO 1 - Hair Shampoo from Vendor 1 for retail, PO 2 - Hair Shampoo from Vendor 1 for consumable.

You can see a banner text for these purchase orders when you view them from Inventory > Orders.

  1. Actual audits and reconciliations with the opening stock -- Zenoti creates two more audits (one for retail and one for consumables) with actual product quantities from the opening stock setup and reconciles them automatically. View these at Reports > Inventory > Audit History.

What to do next

After completing the initial setup, configure additional inventory settings to control how inventory behaves across your organization and centers:

  1. Configure inventory settings β€” general behavioral toggles (Unify Store and Floor, Allow sale at any stock level, adjustments, approvals link)
  2. Alerts and notifications β€” low-stock and batch-expiry alerts
  3. Configure automatic orders β€” auto-PO and auto-TO generation
  4. Set up audits β€” audit workflow and reconciliation approval chain
  5. Configure batch and expiry management β€” if you sell or consume products with expiry dates
  6. Configure barcode printing β€” if your center uses barcode scanners

If your center works with product kits, configure kits after step 1. See Product Kit Management.

Troubleshooting

  • Products don't show on the Opening Stock page. Verify the product is marked active at the center and that the vendor-product association exists for that center. The opening-stock page only lists products that are both active at the center and available from at least one vendor.
  • The Opening Stock page is missing. Your organization may predate the July 2020 release and the opening-stock page feature. Use the Alternative section.
  • Cannot raise a purchase order β€” "center not associated with vendor". Return to Associate vendors and products and associate the vendor with the center you are creating the PO at.
  • The Tax Group dropdown is empty during PO creation. The center does not have a tax group selected for inventory. See Select tax groups for each center.
  • "Start stocks afresh" choice concerns. Selecting Start stocks afresh sets your opening stock entries aside and expects you to raise purchase orders or run an audit to establish stock. You can still return to the Opening Stock page later if the page is still available for your organization, but any adjustments or POs you have already raised in the meantime stay in place.
  • Opening-stock quantity field. Leave the Quantity field blank for products with zero quantity. Entering the literal "0" behaves differently in some CSV imports and can cause silent errors.

For additional troubleshooting, see Inventory FAQ.

Setup articles

Import and migration

Concepts

FAQ and troubleshooting

Was this article helpful?
Your feedback helps us improve our documentation.