ZenotiHelp

Configure barcode printing

ZTZenoti Docs Team Updated September 12, 2026 5 min readHow-to

Audience: Center admin, inventory manager

Barcode labels uniquely identify retail items. When you scan a barcode, product details appear, which simplifies product lookup during retail sales and when checking out products from the center floor. This article explains how to configure the barcode label print format for your center. After you configure the format, it applies whenever you print barcode labels for individual products or for products in a purchase order (PO).


On this page


Before you begin

Permission: Edit (under Inventory) β€” Allows configuring barcode printing settings for inventory.

  • You must have center-level access to configuration settings.
  • Barcode scanning is optional and depends on your center's hardware setup.

Supported label sheets

Zenoti prints barcode labels onto standard pre-cut adhesive label sheets and to single-column thermal label printers. The four supported print-format presets are:

Label sheet Labels per sheet Layout Paper size Fields printed Typical use
Regular (65 labels) 65 13 rows Γ— 5 columns A4 Product name + product code Generic A4 label sheet without a vendor template.
Avery L7651 65 13 rows Γ— 5 columns A4 Product name + product code + price Avery-template-compatible sheet for retail price labels.
Avery 8167 80 20 rows Γ— 4 columns Letter Product name + product code + price Address-style label sheet for bin markers and shelf labels where you want a higher labels-per-sheet count.
Label Printer 1 per row Single column A4 Product name + product code Thermal / continuous-feed label printer that issues one label per row, configurable alignment.

Print to any of these formats from your browser's print dialog. Before a large rollout, run a small test print on your production label stock so you can verify the labels align to the physical sheet β€” see Before you print for the browser-margin settings that keep label alignment correct.

Note: The Label Printer format exposes an additional alignment setting (left / center / right) for the single-column layout. The other three formats are sheet-locked.

Note: The Custom option (configured in the Configure the barcode label format Steps below) is a fifth alternative when none of the four presets match your label stock β€” you specify label width, height, labels-per-row, and spacing directly.

Supported printers and paper formats

Zenoti prints barcode labels through your browser's print dialog. Any standard printer (office laser, inkjet, or thermal label printer) that can print from your browser is supported, provided the correct driver is installed on the machine running the browser. Thermal label printers must be installed through the operating system's standard driver path so that the browser can select them in its print dialog.

Zenoti does not publish a certified-printer list. We recommend doing a small test print on your production label stock before a large rollout.

Supported barcode symbologies

Zenoti prints the following barcode symbologies:

Symbology When it is used
Code 39 The default symbology for all standard label sheets and the Label Printer format. Code 39 is a fixed-character-set alphanumeric symbology suitable for short product codes.
Code 128 Used automatically for Avery L7651 label sheets when the L7651-specific setting is enabled by your administrator. Code 128 encodes a wider character set in less space.

EAN-13 and UPC-A are not currently supported. If your region requires retail barcodes in one of these symbologies (for example, scanned at point of sale by an external retailer), contact your Zenoti representative.

Before you print

  • Adjust your browser's print margins to ensure labels align correctly with the physical label sheet. Set margins to 0 (or the minimum supported by your printer).
  • Turn off your browser's "Headers and footers" option β€” otherwise the browser will print the page URL on the label sheet.
  • Use the same browser and printer profile every time; switching between Chrome and Edge, or between two printers, usually requires re-tuning the margins.

Steps

Configure the barcode label format

  1. At the center level, open Configuration > Inventory for the specific center.
  2. Search for and select the barcode printing setting group.
  3. Configure the label sheet:
  • Label width β€” Set the width of each barcode label..
  • Label height β€” Set the height of each barcode label. Same unit as above.
  • Labels per row β€” Set how many labels print across each row.
  • Label spacing β€” Set the gap between adjacent labels. Same unit as above.
  1. Configure the information displayed on each label:
  • Product name β€” Toggle to show or hide the product name.
  • Product code β€” Toggle to show or hide the product code (the SKU (Stock Keeping Unit) assigned to the product).
  • Price β€” Toggle to show or hide the product price.
  • Reorder optimum β€” Toggle to show or hide the reorder optimum quantity. Useful in print runs where shelf labels show staff the target stock level alongside the barcode.
  1. Select Save.

Note: The barcode itself is always printed on the label β€” there is no toggle to hide it. The whole purpose of the label is the barcode; the other fields (name, code, price) are informational.

Configure the starting position for partial sheets

When printing on a partially used label sheet, set the starting position so that the first label prints on the first empty cell, not the top-left cell of the sheet.

  1. In the barcode printing settings, locate the starting-position fields.
  2. Set Starting row β€” The row number where printing begins.
  3. Set Starting column β€” The column number where printing begins.
  4. Select Save.

Note: Row and column are assumed to be 1-indexed (row 1 = top row, column 1 = leftmost column).

Example: You have a 3-column, 10-row label sheet with the top row (3 labels) already used. Set Starting row to 2 and Starting column to 1. The next print job will use the remaining 27 labels starting at row 2, column 1.

Tips

  • Do a small test print (one or two labels) before running a large batch. Browser and printer combinations shift margins slightly; the test tells you whether to adjust.
  • Use the partial-sheet starting position whenever a label sheet still has empty cells, to avoid wasting label stock.
  • Keep a written note of the width, height, and spacing values that work for each label stock you use β€” if you switch stock, reuse the saved profile.
  • Train cashiers to scan barcodes at checkout instead of typing product codes. Scanning is faster and removes data-entry errors.

Troubleshooting

  • Barcodes print but the scanner cannot read them. The barcode is compressed or blurry. Increase the label width slightly or switch to a higher-resolution print quality in the browser's print dialog.
  • Labels are offset β€” each row prints a little lower than the one above. Browser print margins are not set to 0 / minimum. Re-check the Before you print steps.
  • Only the first label prints; the rest of the sheet is blank. The browser's "Print on both sides" or "Fit to page" options are interfering. Disable them and print again.
  • Partial sheet printing skips too many rows. Re-check the starting-row and starting-column values. Remember they are 1-indexed.
  • The price on the label is wrong. The label prints the product's current sale price as stored in Zenoti. Update the product's sale price, then re-print.
Was this article helpful?
Your feedback helps us improve our documentation.